I need information on 3D electrochemical micromachining setup please... ....etc

[:=Read Full Message Here=:]

ABSTRACT
Miniaturization is the order of the day. Until recently a decade ago traditionally watch parts were considered to be the micro components one can think off. Recent changes in societyâ„¢s demand have forced us to manufacture variety of micro components used in different fields starting from entertainment electronics to be bio medical implants. Present day manufacturing processes used for miniaturization are the micro electronic fabrication techniques used for Micro Electro Mechanical Systems (M ....etc

[:=Read Full Message Here=:]

Definition
Lasers have been considered for space communications since their realization in 1960. Specific advancements were needed in component performance and system engineering particularly for space qualified hardware. Advances in system architecture, data formatting and component technology over the past three decades have made laser communications in space not only viable but also an attractive approach into inter satellite page link applications.

Information transfer is driving the requirements to higher data rates, laser cross -link ....etc

[:=Read Full Message Here=:]

fffffhdedsssdfgsdgdsgdgdgdgdgdgsdg ....etc

[:=Read Full Message Here=:]

Definition
Laser communications offer a viable alternative to RF communications for inter satellite links and other applications where high-performance links are a necessity. High data rate, small antenna size, narrow beam divergence, and a narrow field of view are characteristics of laser communications that offer a number of potential advantages for system design.

Lasers have been considered for space communications since their realization in 1960. Specific advancements were needed in component performance and system engineering particula ....etc

[:=Read Full Message Here=:]

Definition
Lasers have been considered for space communications since their realization in 1960. However, it was soon recognized that, although the laser had potential for the transfer of data at extremely high rates, specific advancements were needed in component performance and systems engineering, particularly for space-qualified hardware. Advances in system architecture, data formatting, and component technology over the past three decades have made laser communications in space not only a viable but also a attractive approach to intersate ....etc

[:=Read Full Message Here=:]

Presented by
Sudheesh K N


Micromachining
Implies parts are made to the size of 1 to 999µm
By the definition micro engg: as the field where component sizes are a few millimeters
Important aspects
Unit removal
Equipment precision
Classification According to Machining phenomena
Removal by mechanical force
Removal by ablation
Removal by dissolution
Plastic deformation
Laser micro machining
Uses a power source (FS laser, Excimer laser) that emits a beam with very high quantum energy.
Laser M ....etc

[:=Read Full Message Here=:]

It would be really help full if anyone made a seminar report on laser micromachining.I couldn't find enough matter on it....please ....etc

[:=Read Full Message Here=:]

laser micro grinding full reportfull report in to the right box for getting free material and support from us/dedicated premium members... ....etc

[:=Read Full Message Here=:]

Definition
Lasers have been considered for space communications since their realization in 1960. However, it was soon recognized that, although the laser had potential for the transfer of data at extremely high rates, specific advancements were needed in component performance and systems engineering, particularly for space-qualified hardware. Advances in system architecture, data formatting, and component technology over the past three decades have made laser communications in space not only a viable but also a attractive approach to intersate ....etc

[:=Read Full Message Here=:]