ABSTRACT
The last decade has seen a substantial increase in commodity computer and network performance, mainly as a result of faster hardware and more sophisticated software. Nevertheless, there are still problems, in the fields of science, engineering, and business, which cannot be effectively dealt with using the current generation of supercomputers. In fact, due to their size and complexity, these problems are often very numerically and/or data intensive and consequently require a variety of heterogeneous ....etc

[:=Read Full Message Here=:]

Interactive Program(me) Guide (IPG) or Electronic Service Guide (ESG), EPG is an on-screen guide to scheduled broadcast television programs, permitting a viewer to browse, select, and discover contents based on time, title, channel, genre, etc, using their remote control, a keyboard or a phone keypad. This technology is predominant in the digital television and radio world however EPGs exist that rely upon analogue technology (using the VBI”or vertical blanking interval). EPG broadcasts data to an application residing within middleware in ....etc

[:=Read Full Message Here=:]

INTRODUCTION

From its origin more than 25 years ago, Ethernet has evolved to meet the increasing demands of packet-switched networks. Due to its proven low implementation cost, its known reliability, and relative simplicity of installation and maintenance, its popularity has grown to the point that today nearly all traffic on the Internet originates or ends with an Ethernet connection. Further, as the demand for ever-faster network speeds has grown, Ethernet has been adapted to handle these higher speeds and the concomi ....etc

[:=Read Full Message Here=:]

Sensitive skin is a large-area, flexible array of sensors with data processing capabilities, which can be used to cover the entire surface of a machine or even a part of a human body. Depending on the skin electronics, it endows its carrier with an ability to sense its surroundings via the skinâ„¢s proximity, touch, pressure, temperature, chemical/biological, or other sensors. Sensitive skin devices will make possible the use of unsupervised machines operating in unstructured, unpredictable surroundings among people, among many obstacles, o ....etc

[:=Read Full Message Here=:]

PRESENTED BY:
Jon Mah


Flex Circuit Design for CCD Application
System Description
 Actively cooled CCD using Thermoelectric Cooler
 Operating Temperature of -100°C ± 0.1°C
 Serial Clock Speed of 1MHz
 CCD size is 4096 X 4096pixels
4 flex circuits
 Hermetic, evacuated housing (not pictured)
 Concentrate on Base assembly (neglecting external preamps, etc.)
 Aside: CCD Background
 Starts with exposing the CCD to light.
 Charge builds in potential wells via the photoe ....etc

[:=Read Full Message Here=:]

how the flex sensor work ?

what is the advantages of using servo motor instead of stepper motor? ....etc

[:=Read Full Message Here=:]

Motion Controlled Robotic Arm Using Flex Sensors



1. INTRODUCTION

Our project deals with controlling a bionic/robotic arm with the help of motion sensing technology by Flex Sensors. The system is basically a master-slave system wherein the master motion sensing glove sits on hosts arm sensing motions of the finger and then using this data to control the servos which control the finger movement of the slave bionic/robotic arm.

How They Work ....etc

[:=Read Full Message Here=:]

Robert Green, an American Inventor, has developed a brand new technology which generates kinetic energy through the conversion of waste heat (as well as many other fuel sources). The Green Steam Engine is piston powered and designed for a wide assortment of practical applications. These steam engines are easy to build and can be used to power boats, electricity generators, air or water pumps, water distillers, heat pumps, air conditioners and a wide array of other small to medium sized appliances


See Vedios
http://youtubewatch?v=GZ41rKx8 ....etc

[:=Read Full Message Here=:]

ABSTRACT
Miniaturization has been a key contributor to advances in electronic technology. Many electronics applications have serious space considerations that are pressuring manufacturers to reduce component size. Much of the motivation for this Certainly, miniaturization has been made possible mostly through remarkable breakthroughs in reducing the size of active components. But as integrated circuits get smaller and more complex, there is an increasing need to also reduce the space required for the supporting passive comp ....etc

[:=Read Full Message Here=:]

Advantages and did advantage of felx sensor ....etc

[:=Read Full Message Here=:]

hi...


plz send me some links to dis topic..

tell me in detail what all concepts come under dis topic. ....etc

[:=Read Full Message Here=:]

Motion Controlled Robotic Arm Using Flex Sensors



1. INTRODUCTION

Our project deals with controlling a bionic/robotic arm with the help of motion sensing technology by Flex Sensors. The system is basically a master-slave system wherein the master motion sensing glove sits on hosts arm sensing motions of the finger and then using this data to control the servos which control the finger movement of the slave bionic/robotic arm.

How They Work ....etc

[:=Read Full Message Here=:]

LINUX FROM SCRATCH
PROJECT REPORT
Submitted by
FALCON FRANCIS MANJU V RAVINDRAN RANJITH KIRAN K SOUMI CG VINU THANKACHAN
CHAPTER 1INTRODUCTION
One important reason for LFS's existence is to help people learn how a Linux system works from the inside out. One of the best things that this learning experience provides is the ability to customize Linux to your own tastes and needs.
A key benefit of LFS is that it allows users to have more control over the system without relying on someone else's Linux implementation.
Anot ....etc

[:=Read Full Message Here=:]

Can anyone give flex advantages and disadvantages ppt ....etc

[:=Read Full Message Here=:]

Power
Power sources include:

On-board or out-board rechargeable energy storage system (RESS)
Gasoline or Diesel fuel
Hydrogen
Compressed air
Liquid nitrogen
Human powered e.g. pedaling or rowing
Wind
Compressed or liquefied natural gas
Solar
Waste heat from internal combustion engine. This can be converted to steam or electricity to increase vehicle propulsion. The extra power may also be used for supplemental systems
Coal, wood, Bio char or other solid combustibles
Electromagnetic ....etc

[:=Read Full Message Here=:]

PRESENTED BY:
Jon Mah


Flex Circuit Design for CCD Application
System Description
 Actively cooled CCD using Thermoelectric Cooler
 Operating Temperature of -100°C ± 0.1°C
 Serial Clock Speed of 1MHz
 CCD size is 4096 X 4096pixels
4 flex circuits
 Hermetic, evacuated housing (not pictured)
 Concentrate on Base assembly (neglecting external preamps, etc.)
 Aside: CCD Background
 Starts with exposing the CCD to light.
 Charge builds in potential wells via the photoe ....etc

[:=Read Full Message Here=:]