This article presents a class which can be used in both the client and server code. The class uses IOCP (Input Output Completion Ports) and asynchronous (non-blocking) function calls which are explained later

With this simple report you could understood :

Service or connect to multiple clients and servers.

Send or receive files asynchronously.

Create and manage a logical worker thread pool to process heavier client/server requests or computations.

It is difficult to find a comprehensive but simple source code to handle client/se ....etc

[:=Read Full Message Here=:]

ABSTRACT

In this paper a new single phase to three-phase converter for ac motor is proposed. The proposed converter employs only six switches and incorporates active input current haping feature, which results in sinusoidal input current at close to unity power factor. The front-end rectifier in the proposed converter permits bidirectional power flow and therefore provides for excellent regulation against fluctuations in source voltage. This feature also facilitates regenerative braking of ac motor drive. An easy to implement control stra ....etc

[:=Read Full Message Here=:]

How tp make quadrilateral model using thermacol ....etc

[:=Read Full Message Here=:]

Abstract

present Skinput, a technology that appropriates the human body for acoustic transmission, allowing the skin to be used as an input surface. In particular, we resolve the location of finger taps on the arm and hand by analyzing mechanical vibrations that propagate through the body. We collect these signals using a novel array of sensors worn as an armband. This approach provides an always available, naturally portable, and on-body finger input system. We assess the capabilities, accuracy and limitations of our technique t ....etc

[:=Read Full Message Here=:]

A Multiple-Input Dc-Dc Positive Buck-Boost Converter Topology

Abstract-
A new multiple-input hybrid energy conversion topology is presented. The proposed topology is capable of combining different energy sources with different voltage-current characteristics, while achieving low part number and bi-directional operational. Compare to previous multiple-input buck-boost converter, the proposed topology provides positive output voltage; it is capable of bi-directional operation; and it has the capability of operating in buck, boost, and buc ....etc

[:=Read Full Message Here=:]

Abstruct-
Analysis, design, and implementation of the space vector modulated three-phase to three-phase matrix converter with input power factor correction are presented. The majority of published research results on the matrix converter control is given an overview, and the one, which employs sheous output-voltage and input-current space vector modulation, is systematically reviewed. The modulation algorithm is theoretically derived from the desired average transfer functions, using the indirect transfer function approach. ....etc

[:=Read Full Message Here=:]

The dream of every communication designer is to provide good quality service to each of his customer within the limited available bandwidth. But in the recent years, the amount of data flowing through the channel has increased. But there has been no such high increase in the available bandwidth. So it is a challenge to effectively utilize the channel spectrum along with providing good quality of service across wireless links. One of the possible ways is to use multiple antennas at both the ends of the transmission link. MIMP exploits natural ph ....etc

[:=Read Full Message Here=:]

Introduction
In computing, input/output, or I/O, refers to the communication between an information processing system (such as a computer), and the outside world – possibly a human, or another information processing system. Inputs are the signals or data received by the system, and outputs are the signals or data sent from it. The term can also be used as part of an action; to perform I/O is to perform an input or output operation. I/O devices are used by a person (or other system) to communicate with a computer. ....etc

[:=Read Full Message Here=:]

A Linux Device Driver for USB to USB Direct Link Device

The first version of the Universal Serial Bus (USB) specification was released in January 1996. In April 2000, version 2.0 of the USB specification, which supports transfer rates up to 480 Mbps, was released. Because of its low cost, high data-transfer rate, ease of use, and flexibility, USB has gained wide acceptance in the computer industry. Today, many peripherals and devices connect to computers through USB interfaces. Currently, most general-purpose operating systems pro ....etc

[:=Read Full Message Here=:]

PRESENTED BY:
N. RAMAKRISHNA REDDY
DINESH REDDY
G. SPURTHI REDDY
MANASA


MICROCONTROLLER BASED MULTIPLE DEVICE CONTROL BASED ON INPUT FREQUENCY.
DESCRIPTION:
The 230v ac supply is down converted into 12v by ac transformer. The transformer output is rectified by bridge rectifier and converts into pulsating dc. This voltage is given to the filter. The filter removes the unwanted ripple components and outp ....etc

[:=Read Full Message Here=:]