There are several growing needs for hydrogen: in the near-term for the upgrading of heavy petroleum, as a chemical feedstock, and for the production of fertilizer; in the mid-term for the production of synthetic fuels for transportation; and in the long-term as a transportation fuel through the use of fuel cells.



High-temperature electrolytic water-splitting supported by nuclear process heat and electricity has the potential to produce hydrogen with an overall system efficiency of 45 to 50 %, while avoiding the challenging corrosive con ....etc

[:=Read Full Message Here=:]

....etc

[:=Read Full Message Here=:]

A hydrogen vehicle
A hydrogen vehicle is an automobile which uses hydrogen as its primary source of power for locomotion. These cars generally use the hydrogen in one of two methods: combustion or fuel-cell conversion. In combustion, the hydrogen is burned in engines in fundamentally the same method as traditional gasoline cars. In fuel-cell conversion, the hydrogen is turned into electricity through fuel cells which then powers electric motors. With either method, the major byproduct from the spent hydrogen is water that can move also a mi ....etc

[:=Read Full Message Here=:]

....etc

[:=Read Full Message Here=:]

In the future, predominantly solar or wind power systems will likely require energy storage for days to approximately a week, with or without connections to the 2 electric grid. If so, conversion of electricity to chemical energy is potentially attractive, since chemicals are inexpensive to store and turnaround efficiency is less critical for storage periods of a week or more. The most attractive chemical for this process is likely to be hydrogen (H2) generated locally by electrolysis of water using intermittent excess solar or wind power. Late ....etc

[:=Read Full Message Here=:]

Chemical Mechanical Planarization (CMP) is an important process in semiconductor chip fabrication. In the CMP process, excess material is removed and the surface is planarized by the action of chemical and mechanical forces. Shallow Trench Isolation (STI) has become a key technology for device isolation in recent times. In this method, a shallow trench is made on the silicon wafer between active devices, silicon dioxide is deposited over the trench as well as the active area and the excess silicon dioxide is removed by CMP. The oxide remaining ....etc

[:=Read Full Message Here=:]

ABSTRACT
Since two-three decades, hydrogen has been identified as a versatile potential fuel competent to the conventional fuel such as gasoline. In order to implement it fully and to develop the combustion based power devices which may supply much higher energy density than others, the understanding of hydrogen air combustion mechanism is very essential. In this seminars, Computational Fluid Dynamics (CFD) based numerical simulations have been performed to study the combustion of non-premixed hydrogen- ....etc

[:=Read Full Message Here=:]

In modern era the main emphasis is on conserving energy and environment .everyone has to be very cautious in daily life so as to preserve our resources. The non conventional energy resources are diminishing and environment is getting polluted. Hence hydrogen can be used as an alternative fuel to preserve both energy and environment. This seminar emphasis on hydrogen as a very useful fuel, hydrogen car, properties of hydrogen and the various reactions of hydrogen. It clearly outlines the concepts and modifications needed so as to use hydrogen as ....etc

[:=Read Full Message Here=:]

i need the details of the hydrogen powered vehicle . and the working procees of it . ....etc

[:=Read Full Message Here=:]

SYNOPSIS
Using an experimental system that mimics stone fragmentation in the renal pelvis, the role of stress waves and cavitation in stone comminution in shock-wave lithotripsy (SWL) is noted. Spherical plaster-of-Paris stone phantoms (10mm Dia) were exposed to 25, 50, 100, 300 and 500 shocks at the beam focus of a Dornier HM-3 lithotripter. The stone phantoms were immersed either in degassed water or in castor oil to delineate the contribution of stress waves and cavitation to stone comminution. It ....etc

[:=Read Full Message Here=:]