ABSTRACT
MICRO-SCALE REGENERATIVE HEAT EXCHANGER
A micro-scale regenerative heat exchanger has been designed, optimized and fabricated for use in a micro-Stirling device. Novel design and fabrication techniques enabled the minimization of axial heat conduction losses and pressure drop, while maximizing thermal regenerative performance. The fabricated prototype is comprised of ten separate assembled layers of alternating metal-dielectric composite. Each layer is offset to minimize conduction losses and maximize heat transfer by boundary layer ....etc

[:=Read Full Message Here=:]

FREE FROST HEAT EXCAHANGER
ABSTRACT
A new concept has emerged in the field of zero - emission vehicles : the cryogenic automobile . The cryogenic automobile uses nitrogen , stored in liquid state , as its working fluid . The liquid nitrogen is pressurized , then vaporized in an economizer through which the exhaust from the expander runs in counter flow . The resulting gaseous nitrogen is superheated in an ambient temperature gas which is injected into a quasi “ isothermal expander to produce t ....etc

[:=Read Full Message Here=:]

Hi, i am pavanbv final year engineering student . i want to know more about microscale regenerative heat exchanger , at present i know only what is that . so pls give me full info about this topic ....etc

[:=Read Full Message Here=:]

hi i wanted a seminar on compact heat exchanger ....etc

[:=Read Full Message Here=:]

hi
This is venkat reddy
i would like to more about this Micro scale regenerative Heat Exchanger
please send me this topic........ ....etc

[:=Read Full Message Here=:]

Submitted By:
SAMBIT SWARUP SATPATHY
ABHIJIT MISHRA
ARUN KUMAR
PUNIT KAR
RAKESH MISHRA
ABINASH MAHANTA
ASHIS NAIK
VIVEK KUMAR UPADHYAYA
ANIL KUMAR SAMAL
ABHISHEK KHANDELWAL


ABSTRACT
The amateur work of us tries to bring a joint unit of air and water
cooler un ....etc

[:=Read Full Message Here=:]

Abstract
My Project “DESIGN ANALYSIS AND FABRICATION OF RADIATOR
” mainly focuses on the thermal design and analysis of radiator as
heat exchanger only. We have developed this work as our semester project with a view to get
familiar with the technologies as well as application of theories into practical work done by
industries. My project contains the design and material selection of the radiator for different
type of vehicles also. For better efficiency, improvement of heat transf ....etc

[:=Read Full Message Here=:]

prepared by:
Sanjay Bharat Dolare



Introduction

A device designed to transfer heat between two physically separated fluids; generally consists of a cylindrical shell with longitudinal tubes; one fluid flows on the inside, the other on the outside.

Any of several devices that transfer heat from a hot to a cold fluid. In many engineering applications, one fluid needs to be heated and another cooled, a requirement economically accomplished by a heat exchanger. In double-pipe exchange ....etc

[:=Read Full Message Here=:]

i dont know anything please get me the info ....etc

[:=Read Full Message Here=:]

FAILURE ANALYSIS OF SHELL AND TUBE HEAT EXCHANGER
PROJECT REPORT
Submitted by
ALEX BABY ARUN M V JAIN RAJ .V VIJEESH VIJAYAN
ABSTRACT
Tar column recoiled E4509 in the phenol plant of HOCL found failed in service un like any other exchanger s in phenol manufacturing process .Each failure very high cost to HOCL in terms of production loss due to down time for maintence and due to the loss of therminol liquid to the process .the loss due to each failure found to be nearly RS 1.5 chore >the cost of tube bundle in SS-316 is ....etc

[:=Read Full Message Here=:]