HI,
I WANT AN ONGOING RESEARCH DETAIL ABOUT MATRIX HEAT EXCHANGERS INCLUDING A POWER POINT PRSENTATION ON IT DESCRIBING
THERE WORKING,PRINCIPLE AND APPLICATIONS.
WITH REGARDS,
ANKITA JAIN
CHEMICAL ENGG.















....etc

[:=Read Full Message Here=:]

FREE FROST HEAT EXCAHANGER
ABSTRACT
A new concept has emerged in the field of zero - emission vehicles : the cryogenic automobile . The cryogenic automobile uses nitrogen , stored in liquid state , as its working fluid . The liquid nitrogen is pressurized , then vaporized in an economizer through which the exhaust from the expander runs in counter flow . The resulting gaseous nitrogen is superheated in an ambient temperature gas which is injected into a quasi “ isothermal expander to produce t ....etc

[:=Read Full Message Here=:]

Introduction

Thermal design of shell-and-tube heat exchangers (STHEs) is done by sophisticated computer software. However, a good understanding of the underlying principles of exchanger design is needed to use this software effectively.

This article explains the basics of exchanger thermal design, covering such topics as: STHE components; classification of STHEs according to construction and according to service; data needed for thermal design; tubeside design; shellside design, including tube layout, baffling, and shellside p ....etc

[:=Read Full Message Here=:]

COST EFFECTIVENESS OF MINERAL WOOL INSULATION Vs PERLITE INSULATION
PROJECT REPORT
Submitted by
DIPU.K.SHAJI GITHU BABU VARUN KUMAR. T.K VIMAL MENON
ABSTRACT
The main objective of this project is to make the cost effectiveness analysis of the system of the thermal insulation of the pipe lines in petrochemical plant which carries steam. In a chemical plant maintaining temperature of fluids in different pipe lines assume greatest importance as each process is performed at particular temperature.
The project work was car ....etc

[:=Read Full Message Here=:]

please get me the info regarding above topic ....etc

[:=Read Full Message Here=:]

I NEED A POWER POINT PRESENTATION ON MICRO HEAT EXCHANGERS ....etc

[:=Read Full Message Here=:]

PYROPHORIC IRON FIRE
NARENDRA KUMAR
FIRE SAFETY OFFICER
IOCL, BARAUNI
Email - [email protected]
What is Pyrophoric Iron Oxidation?
The word pyrophoric is derived from the Greek for
fire-bearing. According to Webster's dictionary,
pyrophoric material means any material igniting
spontaneously or burning spontaneously in air when
rubbed, scratched, or struck, e.g. finely divided
metals. Iron sulfide is one such pyrophoric material
that oxidizes exothermically when exposed to air. It
is frequently found in solid iron sulfide ....etc

[:=Read Full Message Here=:]

hi sir/madam i need the seminar report for micro channel heat exchangers . kindly please send me required information
....etc

[:=Read Full Message Here=:]

Ocean thermal energy conversion (OTEC) is a method for generating electricity which uses the temperature difference that exists between deep and shallow waters to run a heat engine. As with any heat engine, the greatest efficiency and power is produced with the largest temperature difference. This temperature difference generally increases with decreasing latitude, i.e. near the equator, in the tropics. Historically, the main technical challenge of OTEC was to generate significant amounts of power, efficiently, from this very small temperature ....etc

[:=Read Full Message Here=:]

ABSTRACT

TOPIC : HELICALLY COILED HEAT EXCHANGERS

Process heat transfer with conventional shell and tube heat exchanger
is familiar to many engineers in many industries.Their use and performance is well-dominated. However, helically coiled heat exchangers, although they have been around for many years, are not well known.

Although various configurations are available, the basic and most common design consists of a series of stacked helically coiled tubes. The tube ends are connected to manifolds, which act as flu ....etc

[:=Read Full Message Here=:]

prepared by:
Sanjay Bharat Dolare



Introduction

A device designed to transfer heat between two physically separated fluids; generally consists of a cylindrical shell with longitudinal tubes; one fluid flows on the inside, the other on the outside.

Any of several devices that transfer heat from a hot to a cold fluid. In many engineering applications, one fluid needs to be heated and another cooled, a requirement economically accomplished by a heat exchanger. In double-pipe exchange ....etc

[:=Read Full Message Here=:]

ABSTRACT

TOPIC : HELICALLY COILED HEAT EXCHANGERS

Process heat transfer with conventional shell and tube heat exchanger
is familiar to many engineers in many industries.Their use and performance is well-dominated. However, helically coiled heat exchangers, although they have been around for many years, are not well known.

Although various configurations are available, the basic and most common design consists of a series of stacked helically coiled tubes. The tube ends are connected to manifolds, which act as flu ....etc

[:=Read Full Message Here=:]

DESIGN AND DEVELOPMENT OF HIGH-FREQUENCY THERMOACOUSTIC ENGINES FOR THERMAL MANAGEMENT IN MICROELECTRONICS
SEMINAR REPORT
Submitted by
VIBIN KOSHY THOMAS
S7-ME
Department Of Mechanical Engineering
College of Engineering, Thiruvananthapuram – 16
OCTOBER 2010





ABSTRACT

Thermoacoustic heat engines provide a practical solution to the problem of heat management in microcircuits where they can be used to pump heat or produce spot cooling of specific circuit elements. There are ....etc

[:=Read Full Message Here=:]

FAILURE ANALYSIS OF SHELL AND TUBE HEAT EXCHANGER
PROJECT REPORT
Submitted by
ALEX BABY ARUN M V JAIN RAJ .V VIJEESH VIJAYAN
ABSTRACT
Tar column recoiled E4509 in the phenol plant of HOCL found failed in service un like any other exchanger s in phenol manufacturing process .Each failure very high cost to HOCL in terms of production loss due to down time for maintence and due to the loss of therminol liquid to the process .the loss due to each failure found to be nearly RS 1.5 chore >the cost of tube bundle in SS-316 is ....etc

[:=Read Full Message Here=:]

prepared by:
Sanjay Bharat Dolare



Introduction

A device designed to transfer heat between two physically separated fluids; generally consists of a cylindrical shell with longitudinal tubes; one fluid flows on the inside, the other on the outside.

Any of several devices that transfer heat from a hot to a cold fluid. In many engineering applications, one fluid needs to be heated and another cooled, a requirement economically accomplished by a heat exchanger. In double-pipe exchange ....etc

[:=Read Full Message Here=:]

get me the ppt of above topic ....etc

[:=Read Full Message Here=:]