Submitted by,
Aniket Nemade


Less Emission through Waste Heat Recovery
Introduction – Why waste heat recovery?
Reducing emissions and reducing engine operating costs
To increase exhaust gas energy and employing both steam and exhaust gas turbines in a Total Heat Recover Plant
low-speed marine engines are very highly developed and there is little potential for achieving significant reductions in CO2 emissions
Controlling the generation of the emissions inside engine cylinders,
Removi ....etc

[:=Read Full Message Here=:]

IMPROVEMENT OF THERMAL EFFICIENCY BY RECOVERY OF HEAT FROM IC ENGINE EXHAUST
(THERMAL SCIENCES)
CONTENTS:
1. ABSTRACT
2. INTRODUCTION
3. PRINCIPLE OF HEAT RECOVERY FROM IC ENGINE
4. NECESSITY OF THERMAL STORAGE SYSTEM
5. LATENT HEAT THERMAL STORAGE SYSTEM
6. EXPERIMENTAL SETUP
7. RESULTS AND DISSCUSSIONS
8. PERFORMANCE CHARACTERISTICS STUDY
9. CONCLUSION
IMPROVEMENT OF THERMAL EFFICIENCY BY RECOVERY OF HEAT FROM IC ENGINE EXHAUST
ABSTRACT
The steady increased consumption of fuel and power over the years have ....etc

[:=Read Full Message Here=:]

Heat-Recovery Water Heating

Heat recovery is the capture of energy contained in fluids or gases that would otherwise be lost from a facility. Heat sources may include heat pumps, chillers, steam condensate lines, hot air associated with kitchen and laundry facilities, power-generation equipment (such as microturbines or fuel cells), and wastewater drain lines. Opportunities There are two basic requirements for heat-recovery water heating: (1) hot water demand must be great enough to justify equipment and maintenan ....etc

[:=Read Full Message Here=:]

please do give the details on HRSG since we are opting to take it as the final year project... ....etc

[:=Read Full Message Here=:]

ABSTRACT
Steam generators are widely used in industries for several purposes like power production, processing, heating etc. In industry steam generators are the major fuel consumers. In a normal steam generator about 4% of hot water is wasted as blow down. Due to this, a large amount of heat energy is wasted. This project aims to bring a heat recovery system to prevent heat losses, so that a large savings can be made. So in ths a heat recovery system was designed to ....etc

[:=Read Full Message Here=:]

NONLINEAR FEATURE EXTRACTOR FOR TEXTURE SEGMENTATION


presented by
Presented By
Puneet Kumar Sharma
M0819C010
M.Tech-II (Electronic - Computer )


abstract

This article presents a feed-forward network architecture that can be used as a nonlinear feature extractor for texture segmentation. It comprises two layers of feature extraction units; each layer is arranged into several planes, called feature maps. The features extracted from the second layer are used as the final texture features. The featu ....etc

[:=Read Full Message Here=:]

ABSTRACT
The trend among pharmaceutical companies to develop selective drugs of high potency
has pushed the industry to consider the potential of each hazardous ingredient to become
airborne.Dustiness issues are not unique to the pharmaceutical industry, but are relevant
to any industry where powdered materials are mixed, transferred and handled. Interest in
dustiness is also driven by concerns for worker health, the potential for plant explosions
and the prevention of product loss. Unlike other industries, the ....etc

[:=Read Full Message Here=:]

Submitted By:
SAMBIT SWARUP SATPATHY
ABHIJIT MISHRA
ARUN KUMAR
PUNIT KAR
RAKESH MISHRA
ABINASH MAHANTA
ASHIS NAIK
VIVEK KUMAR UPADHYAYA
ANIL KUMAR SAMAL
ABHISHEK KHANDELWAL


ABSTRACT
The amateur work of us tries to bring a joint unit of air and water
cooler un ....etc

[:=Read Full Message Here=:]

K. Wojciechowski, J. Merkisz, P. Fuć
, P. Lijewski, M.Schmidt


Abstract
Automotive engines reject a considerable amount of energy to the ambience through the exhaust gas. Significant reduction of engine fuel consumption could be attained by recovering of exhaust heat by using thermoelectric generators. One of the most important issues is to develop an efficient heat exchanger which provides optimal recovery of heat from exhaust gases. The work presents a design and perform ....etc

[:=Read Full Message Here=:]

digrams regarding the topic ....etc

[:=Read Full Message Here=:]