Presented In:
MECHANICAL ENGINEERING DEPARTMENT
JIND INSTITUTE OF ENGINEERING AND TECHNOLOGY, JIND

1.0 INDRODUCTION
An escalator is a moving staircase conveyor transport device for carrying people between floors of a building. The device consists of a motor-driven chain of individual, linked steps that move up or down on tracks, allowing the step treads to remain horizontal.
Escalators are used around the world to move pedestrian traffic in places where elevators would be impractical. Principal areas of u ....etc

[:=Read Full Message Here=:]

EXTENDING GRIDS WITH CLOUD RESOURCE MANAGEMENT FOR SCIENTIFIC COMPUTING

presented By,
NETHRA A.S
8th sem,BE(cse)
Guide: Mrs.Prathima


CONTENTS
Overview
Introduction
Background concepts
-ASKALON
-cloud computing
Resource management architecture
-Cloud management
-Image catalogue
-Security mechanisms
Conclusion
References




OVERVIEW
Cloud computing is emerging as a paradigm for the next generation o ....etc

[:=Read Full Message Here=:]

Motorized Lifting Jack



Introduction



The motorized lifting jack is a modified form of conventional screw jack that helps to lift the load using motor as a source of energy and gear box to control the lift of the jack. In this project we aim for the following:

a) Arrange & modify the conventional cylindrical lifting jack by putting extra ring in the center to grip the v belt assembly.
b) To arrange & modify the 12V big D.C. Motor by adding � ....etc

[:=Read Full Message Here=:]

i need a details abot space truss drawings in AutoCAD
space truss design details dwg ....etc

[:=Read Full Message Here=:]

ABSTRACT
Cloud Computing is the delivery of computer resources through a Web Service interface (e.g.
SOAP or REST) on as-needed basis. The term cloud refers to the organization of the underlying physical
infrastructure remaining opaque to the end user. In other words, cloud computing gives a user access
to computer resources over a network through Web services, while the actual physical location and
organization of the equipment hosting these resources- be it in the next room or spread across the globeis
not necessarily known to t ....etc

[:=Read Full Message Here=:]

space truss dwg thank you
i will be glad to see this drawing
space truss design details dwg
space truss dwg thank you
i will be glad to see this drawing
....etc

[:=Read Full Message Here=:]

1. A STUDY OF MUNICIPAL SOLID WASTE MANAGEMENT IN PUTTUR TOWN - DAKSHINA KANNADA

2. STUDY ON STRENGTH BEHAVIOUR OF CONCRETE USING FOUNDRY DUST IN FINE AGGREGATE

3. SUSTAINABLE AND COST EFFECTIVENESS BUILDING MATERIAL TECHNOLOGY THROUGH PARTIAL REPLACEMENT OF CEMENT BY GRANITE CUTTING SLURRY WASTE POWDER AND PARTIAL REPLACEMENT OF COARSE AGGRETATE BY MANGALORE TILES BATS FOR ARCH LINTELS

4. DESIGN AND EVALUATION OF HIGH VOLUME FLYASH CONCRETE FOR RIGID PAVEMENT OVERLAYS

5. ASSESSMENT OF WATER QUALITY INDEX FOR GROUND WATER - CASE STU ....etc

[:=Read Full Message Here=:]

Abstract:
The aircraft structure is an important part where the structure of an aircraft depends on the optimum requirement of the customer and the environments in which it will be going to fly for the major time. It has to go several checks at regular interval of flying hours under proper inspection. This paper contains the basic information regarding the components of an aircraft and the basic concept of its design. The main criteria of design and its philosophy is the factor of safety which has to be accounted at ....etc

[:=Read Full Message Here=:]

1.2.54 inch is equal to :
(A)6.35 mm
(B)63.50 mm
(C )6.40 mm
(D)64.516 mm

2.One square km is equal to _________hectare.
(A)1
(B)10
(C )100
(D)1000

3.T - Square is used to drawing________lines.
(A)Inclined
(B)Parallel
(C )Curved
(D)Conlinuous

4.If a cubical tank of one meter sides is filled with water, the weight of water will be_
(A)1000 kg
(B)100 kg
(C )10 kg
(D)1 kg

5.Prismatic compass was invented by________.
(A)Captain Kapler
(B)Captain Kater
(C )Dr.C.L. Kochher
(D)Prof.K.V. Kulkarni

6 ....etc

[:=Read Full Message Here=:]

i was working on a project with multi pitch roof so i was trying to find out similar design and analysis examples worked before, so please let me have it in pdf format ....etc

[:=Read Full Message Here=:]

Truss


In architecture and structural engineering, a truss is a structure comprising one or more triangular units constructed with straight members whose ends are connected at joints referred to as nodes. External forces and reactions to those forces are considered to act only at the nodes and result in forces in the members which are either tensile or compressive forces. Moments (torques) are explicitly excluded because, and only because, all the joints in a truss are treated as revolutes. A planar tr ....etc

[:=Read Full Message Here=:]

Seminar Report On Suspension Bridge
Submitted By:-
Ashis Kumar Jain
0601220299, 7th Sem.

Contents
What???
Types of Bridges
Arch Bridge
Beam Bridge
Cable-stayed Bridge
Cantilever Bridge
Truss Bridge
Suspension Bridge “ An Introduction
Terms related to Suspension Bridge
Structural Analysis
Structural Failure
Quality Control in Suspension Cable
Advantages & Limitations
Load Distribution in Different Types ....etc

[:=Read Full Message Here=:]

ABSTRACT
Cloud Computing is the delivery of computer resources through a Web Service interface (e.g.
SOAP or REST) on as-needed basis. The term cloud refers to the organization of the underlying physical
infrastructure remaining opaque to the end user. In other words, cloud computing gives a user access
to computer resources over a network through Web services, while the actual physical location and
organization of the equipment hosting these resources- be it in the next room or spread across the globeis
not necessarily known to t ....etc

[:=Read Full Message Here=:]

SOLAR THERMAL PROPULSION
ABSTRACT
Solar thermal propulsion is a form of space craft propulsion. Space craft propulsion is used to change the velocity of space craft and artificial satellites. There are many methods for space craft propulsion. Each method has draw backs and advantages, and space craft propulsion is an active area of research. Solar thermal propulsion conceived in 1956 by Kraft Echrike. Solar thermal propulsion is an excellent choice because it requires only one propellant gas and c ....etc

[:=Read Full Message Here=:]

Truss


In architecture and structural engineering, a truss is a structure comprising one or more triangular units constructed with straight members whose ends are connected at joints referred to as nodes. External forces and reactions to those forces are considered to act only at the nodes and result in forces in the members which are either tensile or compressive forces. Moments (torques) are explicitly excluded because, and only because, all the joints in a truss are treated as revolutes. A planar tr ....etc

[:=Read Full Message Here=:]