pls send me the ppt of behavior of concrete at elevated temperature for our seminar work ....etc

[:=Read Full Message Here=:]

Capacity: 7.50 Lakh Litres
Staging Height: 16m

....etc

[:=Read Full Message Here=:]

ABSTRACT
Cryogenic grinding permits heat-sensitive, thermoplastic, and elastic materials to be economically ground to very small particle sizes. The cryogenic process actually embrittle a material prior to size reduction and controls heat buildup in the grinding equipment. The result is high product quality and system productivity.
Cryogenic grinding involves cooling a material below its embitterment temperature with a cryogenic fluid, typically liquid nitrogen or, in certain applications, carbon dioxide. Af ....etc

[:=Read Full Message Here=:]

ABSTRACT
The United States and Texas in particular have a transportation challenge that requires addressing the following four
issues simultaneously: traffic congestion, environmental pollution, safety and energy dependence. In pursuit of a
solution to these transportation challenges, various technological alternatives have been proposed. Notable among
these alternatives is the concept of dualmode. Dualmode vehicles work like usual roadway vehicles using on-board
energy storage when not on an electrified guideway, but are equipped t ....etc

[:=Read Full Message Here=:]

ABSTRACT
Combustion chamber deposits are found in all internal combustion engines. When fuel and air burn inside an internal combustion engine, deposits form on the walls inside the cylinder. The factors influencing deposit formation are changes in fuel composition, coolant temperatures, engine speed and load, and spark timing. One way to discourage deposit formation is to prevent condensation. Raising the wall temperature prevent condensation. With increased wall temperature, hydrocarbon condensation te ....etc

[:=Read Full Message Here=:]

DESIGN OF PRESSURE VESSEL

ABSTRACT
This project work deals with a detailed study and design procedure of pressure vessel. A detailed study of various parts of pressure vessels like shell, closure, support, flanges, nozzles etc. Design is carried according to rules of ASME code section VIII, Division I.
The first chapter deals with detailed study of pressure vessel i.e. the various materials used in pressure construction and temperature are mentioned .It also deals with the study of various parts like flanges, support e ....etc

[:=Read Full Message Here=:]

Hi im yogesh lecturer at BVPIT bardoli here, i would like to get details on design of RCC Elevated water tank ppt for study purpose so need help on tank design ....etc

[:=Read Full Message Here=:]

i am kavipriyan. i am doing seminar about behaviour of concrete at elevated temperature. i need ypur ppt to know more information about this topic . thank you ....etc

[:=Read Full Message Here=:]

OPTIMIZATION OF CURE CYCLE TIME OF A BIAS TRUCK LUG TYRE BY STUDYING THE CURE EQUIVALENTS IN ISOTHERMAL AND NON-ISOTHERMAL CONDITIONS


INTRODUCTION
Curing is a process in which the viscoelastic rubber is converted into three-dimensional networks by tying up of all independent chains. Uncured rubber is a viscoelastic fluid, which has poor physical properties and undergoes deformation easily. Curing process reduces the flow of rubber material. And also reduces the amount of permanent deformation after the removal of deforming ....etc

[:=Read Full Message Here=:]

I want seminar report on mono rail please provide
....etc

[:=Read Full Message Here=:]

pls send me the ppt of behavior of concrete at elevated temperature for our seminar work ....etc

[:=Read Full Message Here=:]

INTRODUCTION TO AMMONIA
________________________________________

Ammonia is one of the most important basic chemical of the world, ranking with materials such as sulfuric acid and sodium carbonate. In the fertilizer field, anhydrous ammonia itself has become the major supplier of the fertilizer nitrogen in India and it is also important inter mediate in production of more complex chemicals.
The major use of ammonia, both directly and indirectly, is as an intermediate in the fertilizer area. There are many othe ....etc

[:=Read Full Message Here=:]

i want full information about 'behaviour of concrete at elevated temperature
and also ppt on this topic ....etc

[:=Read Full Message Here=:]

Studies on Aluminum-Fly-Ash Composite Produced by Impeller Mixing

A THESIS SUBMITTED IN PARTIAL FULFILLMENT OF THE REQUIREMENTS FOR THE DEGREE OF
Master of Technology
In Metallurgical & Materials Engineering
Submitted By
Shuvendu Tripathy Roll No.207MM103
Under the guidance of Prof.S.Sarkar
Department of National Metallurgical & Materials Institute of Technology Rourkela 2009
National Institute of Technology Rourkela


ABSTRACT
Metal matrix composites (MMCs) constitute an important class of design and w ....etc

[:=Read Full Message Here=:]

ABSTRACT
Combustion chamber deposits are found in all internal combustion engines. When fuel and air burn inside an internal combustion engine, deposits form on the walls inside the cylinder. The factors influencing deposit formation are changes in fuel composition, coolant temperatures, engine speed and load, and spark timing. One way to discourage deposit formation is to prevent condensation. Raising the wall temperature prevent condensation. With increased wall temperature, hydrocarbon condensation te ....etc

[:=Read Full Message Here=:]

1. INTRODUCTION
1.1 Micro Electro-Mechanical System (MEMS)
Micro electro-mechanical structures and systems are miniature devices that enable the operation of complex systems. They exist today in many environments, especially automotive, medical, consumer, industrial, and aerospace. Their potential for future penetration into a broad range of applications is real, supported by strong developmental activities at many companies and institutions. The technology consists of a large portfolio of design and fabrication p ....etc

[:=Read Full Message Here=:]