Presented By
A.ARTHI JANNIE


HARMONIC ANALYSIS OF SEPARATELY EXCITED DC MOTOR DRIVES FED BY SINGLE PHASE CONTROLLED RECTIFIER AND PWM RECTIFIER
ABSTRACT
PWM rectifier is an ac to dc power converter which is implemented using power electronic semiconductor switches such as MOSFET, IGBT. Different from diode bridge rectifiers, PWM rectifiers achieve bidirectional power flows,which can be extensively used in battery charger, UPS system, regulated dc voltage source. SCR converters provide low power fac ....etc

[:=Read Full Message Here=:]

IPPAM within the framework of the project is underway to build a mechatronic prosthesis under equipped with pneumatic artificial muscles. The aim of this PhD project is study of the influence of an actuated prosthesis to a step pattern of leg amputees. The rigidity of the prosthesis only adaptable, and there must be a certain torque can be delivered. Students are first asked to operate with a control panel (displays, knobs, ...) for the prosthesis design. The prosthesis must possess a number of operating modes. It must be possible for the press ....etc

[:=Read Full Message Here=:]

Abstract:
A modified friction damper is presented to enhance the performance of conventional friction damper and semi-active variable friction damper. An additional plate is provided between the two sliding plates of a conventional friction damper which results in an additional sliding interface with the same normal (clamping) force. Similar modification is also made to semi-active variable friction damper (SAVFD) to enhance its performance. The enhancement in the performance of the benchmark building is studied under across wind load ....etc

[:=Read Full Message Here=:]

pls give the details of this project Wind-Driven Self-Excited Induction Generator With Voltage and Frequency Regulated by a Reduced-Rating Voltage Source inverter
....etc

[:=Read Full Message Here=:]

Power Factor Correction of Linear and Non-linear Loads Employing a Single Phase Active Power Filter Based on a Full-Bridge Current Source Inverter Controlled Through the Sensor of the AC Mains Current
Abstract:
In the last years the number of non-linear loads has been increasing rapidly. This non-linear load had drawn a current form the AC Mains with harmonic components, leading to low power factor, low efficiency, interference by the EMI, among others. A classic solution is the use of passive filters, which ....etc

[:=Read Full Message Here=:]

SPEED SENSORLESS SEPARATELY EXCITED DC MOTOR DRIVE WITH AN ADAPTIVE OBSERVER


ABSTRACT
This project deals with a speed sensorless separately excited dc motor drive which uses the adaptive observer to estimate the rotor speed. The stability analysis of speed estimation is carried out. The modified feed forward control is integrated with the adaptive observer to simplify the implementation. The design guideline for feedback gain and the speed controller are also given to assure system stability for the entire oper ....etc

[:=Read Full Message Here=:]

Abstract
Due to increasing demand for speech communications, efficient techniques in low-rate speech coding are of interest.Here a new compression technique using root cepstral analysis has been proposed. Implementing the proposed method causes the coder to deal with root cepstrum coefficients instead of speech samples. The main idea in using root cepstrum analysis is that some of the trivial coefficients can be ignored to send toward the decoder. Thus considerable reduction in the total bit-rate is achieved. Moreover it has the advanta ....etc

[:=Read Full Message Here=:]

Abstract
Drilling assisted by axial vibration at low frequency is a promising machining process because, by naturally fragmenting chips, it can improve both productivity by canceling stripping operations and work piece quality by decreasing negative effects due to chip friction. Based on a theory of self-excited vibrations, a drilling device has been developed which is described in this paper. This technology is very compact and can used on any conventional machine tool. However the experiments on these machine tools are quite difficul ....etc

[:=Read Full Message Here=:]

Hi Im Jason here.Does anyone done or did the project about this title before?Quite headache with this topic as my lecturer can't guide me in the right way of doing it @@... ....etc

[:=Read Full Message Here=:]

I think it is very useful to my project. i am doing the project on self exited induction generator control by voltage and frequency control ....etc

[:=Read Full Message Here=:]