CCA (CCS) Rules-1965

CCA (CCS) Rules-1965
SHORT TITLE AND COMMENCEMENT
CENTRAL CIVIL SERVICES(CLASSIFICATION, CONTROL & APPEAL) RULES, 1965
POWERS CONFERRED BY PROVISO TO ARTICLE 309 AND CLAUSE (5) OF ARTICLE 148 OF THE CONSTITUTION
THEY SHALL COME INTO FORCE ON THE 1ST DECEMBER, 1965.
INTERPRETATION
APPOINTING AUTHORITY:
The authority empowered to make appointments to the service of which the government servant is for the time being a member or to the grade of the service in which the government servant is for ....etc

[:=Read Full Message Here=:]

PRESENTED BY :
PAVAN.A & ASHISH


Introducing PowerPoint 2007
 WHAT IS CCS?
 CCS is a system of technologies that integrates three stages: CO2 capture, CO2 transport and geologic CO2 storage.
 Various technologies with different degrees of maturity are competing to be the low-cost solution for each stage of the CCS value chain
 FUEL
 COAL AS A MAJOR SOURCE
 COAL IN INDIA
 Usage of coal foe generation of power results in the production on co2
 From the graph it evide ....etc

[:=Read Full Message Here=:]

CONSTRUCTION SAFETY CLIMATE
IN DEVELOPING COUNTRY
BIKARAMA PRASAD YADAV
SENIOR HSE- MANAGER
SOMA ENTERPRISES LTD
DMRC PROJECT
Email - [email protected]
Safety in the construction industry has always
been a major issue. Wherever reliable records are
available, construction is found to be one of the
most dangerous on safety and health criteria,
particularly in developing countries. Though much
improvement in construction safety has been
achieved, the industry still continues to lag behind
most other industries with regard to ....etc

[:=Read Full Message Here=:]

155/2015
Maximum : 100 marks
Time : 1 hour and 15 minutes

1.The maximum twisting moment a shaft can resist, is the product of the 
permissible shear stress and:
(A)Moment of inertia
(B) Polar moment of inertia
(C ) Polar modulus
(D) Modulus of rigidly

2.A beam of length L is pinned at both ends and is subjected to a 
concentrated bending couple of moment M at its centre. The maximum bending 
moment in the beam is :
(A)ML/2
(B)M
(C )M/3
(D)M/2

3.In plastic analysis, the shape factor for a triangular ....etc

[:=Read Full Message Here=:]

PCM PRINCIPLES&CAS,CCS#7-TRAINING PROJECT REPORT AT ALTTC GHAZIABAD(BSNL)


Pulse Code Modulation (PCM)
Principles
Analog transmission is not particularly efficient. When the signal-to-noise ratio of an analog signal deteriorates due to attenuation, amplifying the signal also amplifies noise. Digital signals are more easily separated from noise and can be regenerated in their original state. The conversion of analogue signals to digital signals therefore eliminates the problems c ....etc

[:=Read Full Message Here=:]

please, i need ccs code for active noise cancellation T_T ....etc

[:=Read Full Message Here=:]

STUDYING THE PROCUREMENT MANAGEMENT SYSTEM IN CROSS COUNTRY NATURAL GAS PIPELINE PROJECTS & SUGGEST TECHNIQUE FOR IMPROVE THE PROCESS
Executive summary
The project title is “Studying the procurement management system in Cross Country Natural Gas pipeline projects & suggest techniques to improve the process”. This report is divided in five main parts. First is introduction about company GSPL and industry in which GSPL is working. Second tells about the different project activities in a project. Third chapt ....etc

[:=Read Full Message Here=:]

This article is presented by:
D. Chandrasekharam
Department of Earth Sciences
Indian Institute of Technology
Bombay 400076, India
GEOTHERMAL ENERGY RESOURCES OF INDIA: COUNTRY UPDATE

ABSTRACT
All the geothermal provinces of India are located in areas with high heat flow and geothermal gradients. The heat flow and thermal gradient values vary from 75–468 mW/m2 and 59–234°C respectively. Additional exploration studies and reservoir modelling have ....etc

[:=Read Full Message Here=:]

1.The angle between two curved lines is known as :
(A)Spherical angle
(B) Obtuse angle
(C ) Acute angle
(D) Deflection angle

2.Which of the following is the classification based upon the system of surveying ?
(A)Chain surveying
(B)Triangulation surveying
(C )City surveying
(D)Mine surveying

3.The survey that does not deal with mapping of large water bodies is :
(A)Hydrographic Survey
(B)Navigation Survey
(C )Marine Survey
(D)Cadastral Survey

4.During the office work, surveyor does :
(A)Design of struct ....etc

[:=Read Full Message Here=:]

hi everyone, i need material for cross layer design related to mobile adhoc for 4g if any one knw abt it give me ya link.... ....etc

[:=Read Full Message Here=:]