Submitted By
Shivek dhar


ABSTRACT
Gone through a rigorous four weeks training under the guidance of capable engineers and workers of bajaj motors limited, headed by the executive director of the company Mr. J.C Jha in the machining plant situated in Narsinghpur, Gurgaon, Haryana.
The training was specified under the CAMSHAFT department of the machining unit. Working under the cam machining department the basic grinding, scaling and machining was shown on heavy to medium duty lathes planted in the same ....etc

[:=Read Full Message Here=:]

Altezza camshafts reassembling and timing ....etc

[:=Read Full Message Here=:]

1.Introduction:
The first railways in India were built in 1853 and their subsequent continent-wide development saw the appearance of various private railway companies and state-owned railway systems. To enforce standardization and coordination between these sometimes-disparate systems, the Central Standard Office (CSO) was established in 1930 to prepare designs, standards and specifications.
However, before Indian independence in 1947, most of the design and manufacturing of rolling stock and infrastructure was entrusted to foreign c ....etc

[:=Read Full Message Here=:]

Hello,

Presently I am using forging for manufacturing cam shaft.

The yield I am achieving 60%.To improve the yield to 75 % do you have any alternate process please provide.

Material : Low Carbon Steel.

Application : Used in Fuel Injection Pump operates at 1500 Rpm and Higher load. ....etc

[:=Read Full Message Here=:]

OVERHEAD CAMSHAFT ENGINE
* INTRODUCTION :-
OHV means OverHead Valve –
An engine design where the camshaft is installed inside the engine block and valves are operated through lifters, pushrods and rocker arms (an OHV engine also known as Pushrod engine).
Although an OHV design is a bit outdated, it has been successfully used for decades. An OHV engine is very simple, has more compact size and proven to be durable.
* Classification :-
Single OverHead Cam
Double OverHead Cam
Pushrod Engines
* Single O ....etc

[:=Read Full Message Here=:]

THE IMPACTS OF ANTENNA AZIMUTH AND TILT INSTALLATION ACCURACY
ON
UMTS NETWORK PERFORMANCE


Abstract

Inconsistencies in setting up antenna azimuth and tilt during installation may reduce overall network performance. However, the degree of quality degradation depends on the amount of the discrepancy between the designed and installed parameters. The paper invest ....etc

[:=Read Full Message Here=:]

Quick Installation Guide


Installing COMSOL 4.1 on Linux
1 You may need root privileges to install COMSOL in a system directory. You
may also need root privileges to mount the DVD.
2 The COMSOL installer is an X-windows application so you need to be logged
in with access to an X-windows display.
3 Insert the COMSOL 4.1 DVD into the DVD drive. If the DVD is not
mounted automatically by your operating system, use the mount command to
mount the DVD.
4 To start th ....etc

[:=Read Full Message Here=:]

Camshaft


Double overhead cams control the opening and closing of the valves
The camshaft is used in IC Engines to operate poppet valves. It consists of a cylindrical rod running the length of the cylinder bank with a number of oblong lobes or cams protruding from it, one for each valve. The cams force the valves open by pressing on the valve, or on some intermediate mechanism, as they rotate.
The relationship between the rotation o ....etc

[:=Read Full Message Here=:]

Mechanical Design of a Robotic System for Automatic Installation of Magnetic Markers on the Roadway

MAGNETIC REFERENCE MARKER INSTALLATION :

n Involves drilling the roadway surface.

n Stacked ceramic magnets and neodymium magnets require hole depth that are just 10.1 cm and 2.5 cm.

n Vehicles depend on the magnet for speed detection and lateral road position.


Figure 11:Magnetic reference marker installation robot


Figure 12:Schematic”marker installation trailer

STRUCTURAL DESIGN :


n Special attention needs to ....etc

[:=Read Full Message Here=:]

Remote Software Installation

Basically, REMOTE SOFTWARE INSTALLATION is a collection of tools that allow the network administrator, sitting at his or her desk, to manage a network of remote PCs and accomplish those tasks that would otherwise require running from one PC to the next. These tasks include the installation of new applications and updates, remote control or monitoring of network workstations, keeping an inventory of software and hardware installed on those systems, and many other functions that will be described in detail t ....etc

[:=Read Full Message Here=:]