presented by:
N.B.SARIKA,
S.SUSHMA


INTRODUCTION
Chain drive is a way of transmitting mechanical power from one place to another.
It is often used to convey power to the wheels of a vehicle, particularly bicycles and motorcycles.
It is also used in a wide variety of machines besides vehicles.
working
The power is conveyed by a roller chain, known as the drive chain or transmission chain, passing over a sprocket gear, with the teeth of the gear meshing with the ....etc

[:=Read Full Message Here=:]

Power
Power sources include:

On-board or out-board rechargeable energy storage system (RESS)
Gasoline or Diesel fuel
Hydrogen
Compressed air
Liquid nitrogen
Human powered e.g. pedaling or rowing
Wind
Compressed or liquefied natural gas
Solar
Waste heat from internal combustion engine. This can be converted to steam or electricity to increase vehicle propulsion. The extra power may also be used for supplemental systems
Coal, wood, Bio char or other solid combustibles
Electromagnetic ....etc

[:=Read Full Message Here=:]

1. Project Overview
1.1 INTRODUCTION
The majority of traffic detection technology and sensor research has focused on the
detection of “motorized” traffic. This has left a need for objective information on the
performance of “non-motorized’ traffic detectors. Bicycles and pedestrians are the two
most common types of non-motorized traffic. In recent years, sensors have been
developed to detect the presence of pedestrians and the speed and presence of bicycles.
This has been accomplished with a variety of ....etc

[:=Read Full Message Here=:]

ABSTRACT
A hybrid vehicle (HV) is a vehicle using an on-board rechargeable energy storage system (RESS) and a fuelled power source for vehicle propulsion. The HV pollutes less and uses less fuel. The different propulsion power systems may have common subsystems or components. The HV provides better fuel economy than a conventional vehicle because the engine is smaller and may be run at speeds providing more efficiency

INTRODUCTION
A hybrid vehicle (HV) is a vehicle using an on-board rechargeable energy storage syst ....etc

[:=Read Full Message Here=:]

Send me the full project report on above topic. ....etc

[:=Read Full Message Here=:]

Project Mercedes Benz
Authors: M.Sudharshan Seshadri - 07G103
B.RamPrakash - 07G78
K.G.Ramkumar - 07G77
CT.Saminathan - 07G81

Name of the Guide : Prof.S.Rajaram

Department : Mechanical
College : Thiagarajar College of Engineering

ABSTRACT:
This project intends to give the complete profile of the automobile company Mercedes Benz. The name Mercedes Benz needs no introduction for the car enthusiastic people. Ever since its foundation this name has been associated with the world class brand of cars, trucks and buses. T ....etc

[:=Read Full Message Here=:]

Submitted by
R.GUNA SEKARAN
P.PANEER SELVAM
T.MANI VANNAN
M.MANI VEL
M.SATHEESH KUMAR


INTRODUCTION:
A motorcycle (also called a motorbike, bike, or cycle) is a single-track, engine-powered, two-wheeled motor vehicle. Motorcycles vary considerably depending on the task for which they are designed, such as long distance travel, navigating congested, cruising, sport and racing, or off-road conditions.
Motorcycles are one of the most affordable forms of motorized transport in many parts of the world and, for ....etc

[:=Read Full Message Here=:]

PRESENTED BY:
VIGNESH.P


INTRODUCTION:
During the 1990s, regulations requiring an approach to zero emissions from vehicles increased interest in new battery technology. Battery systems that offer higher energy density became the subject of joint research by federal and auto industry scientists.
Solar cars were first built by universities and manufacturers. The sun energy collector areas proved to be too large for consumer cars, however that is changing. Development continues on solar cell design and car pow ....etc

[:=Read Full Message Here=:]

Please I really need the report, thanks.
....etc

[:=Read Full Message Here=:]

A PRESENTATION ON SUSPENSION SYSTEM

PRESENTED BY:-
NIKHIL VERMA
ROLL NO. 13735
MECHANICAL 3RD YEAR


INTRODUCTION
Suspension system is the term given to the system of springs, shock absorbers and linkages that connects a vehicle to its wheels . It is basically cushion for passengers protects the luggage or any cargo and also itself from damage and wear.
Sir William Brush is the father of suspension system in automobiles.

ROLE OF SUSPENSION SYSTEM
The main role of suspension system are ....etc

[:=Read Full Message Here=:]