AUTO TURNING FUEL VALVE
#1

Submitted by
R.GUNA SEKARAN
P.PANEER SELVAM
T.MANI VANNAN
M.MANI VEL
M.SATHEESH KUMAR

[attachment=11853]
INTRODUCTION:
A motorcycle (also called a motorbike, bike, or cycle) is a single-track, engine-powered, two-wheeled motor vehicle. Motorcycles vary considerably depending on the task for which they are designed, such as long distance travel, navigating congested, cruising, sport and racing, or off-road conditions.
Motorcycles are one of the most affordable forms of motorized transport in many parts of the world and, for most of the world's population; they are also the most common type of motor vehicle. There are around 200 million motorcycles (including mopeds, motor scooters and other powered two and three-wheelers) in use worldwide, or about 33 motorcycles per 1000 people. This compares to around 590 million cars, or about 91 per 1000 people. Most of the motorcycles, 58%, are in the developing countries of Asia—Southern and Eastern Asia, and the Asia Pacific countries, excluding Japan—while 33% of the cars (195 million) are concentrated in the United States and Japan. As of 2002, India with an estimated 37 million motorcycles/mopeds was home to the largest number of motorized two wheelers in the world. China came a close second with 34 million motorcycles/mopeds.
HISTORY:
The first internal combustion, petroleum fueled motorcycle was the Petroleum Reitwagen. It was designed and built by the German inventors Gottlieb Daimler and Wilhelm Maybach in Bad Cannstatt, Germany in 1885. This vehicle was unlike either the safety bicycles or the boneshaker bicycles of the era in that it had zero degrees of steering axis angle and no fork offset, and thus did not use the principles of bicycle developed nearly 70 years earlier. Instead, it relied on two outrigger wheels to remain upright while turning. The inventors called their invention the Reitwagen ("riding car"). It was designed as an expedient tested for their new engine, rather than a true prototype vehicle. Many authorities who exclude steam powered, electric or diesel two-wheelers from the definition of a motorcycle, credit the Daimler Reitwagen as the world's first motorcycle.
If a two-wheeled vehicle with steam propulsion is considered a motorcycle, then the first was the French velocipede of 1868. This was followed by the American Roper steam velocipede of 1869, built by Sylvester H. Roper Roxbury, Massachusetts. Roper demonstrated his machine at fairs and circuses in the eastern U.S. in 1867, and built a total of 10 examples.
In 1894, Hildebrand & Wolfmüller became the first series production motorcycle and the first to be called a motorcycle (German: Motorrad). In the early period of motorcycle history, many producers of bicycles adapted their designs to accommodate the new internal combustion engine. As the engines became more powerful and designs outgrew the bicycle origins, the number of motorcycle producers increased.
Until World War I, the largest motorcycle manufacturer in the world was Indian, producing over 20,000 bikes per year. By 1920, this honor went to Harley-Davidson, with their motorcycles being sold by dealers in 67 countries. By the late 1920s or early 1930s, DKW took over as the largest manufacturer.
After World War II, the BSA Group became the largest producer of motorcycles in the world, producing up to 75,000 bikes per year in the 1950s. The German company NSU held the position of largest manufacturer from 1955 until the 1970s.
In the 1950s, streamlining began to play an increasing part in the development of racing motorcycles and the "dustbin fairing" held out the possibility of radical changes to motorcycle design. NSU and Moto Guzzi were in the vanguard of this development, both producing very radical designs well ahead of their time.[25] NSU produced the most advanced design, but after the deaths of four NSU riders in the 1954–1956 seasons, they abandoned further development and quit Grand Prix motorcycle racing. Moto Guzzi produced competitive race machines, and by 1957 nearly all the Grand Prix races were being won by streamlined machines. The following year, 1958, full enclosure fairings were banned from racing by the FIM in the light of the safety concerns.
From the 1960s through the 1990s, small two-stroke motorcycles were popular worldwide, partly as a result of East German Walter Kaaden's engine work in the 1950s.
Today, the motorcycle industry is mainly dominated by Japanese companies such as Honda, Kawasaki, Suzuki, and Yamaha, although Harley-Davidson and BMW continue to be popular and supply considerable markets. Other major manufacturers include Piaggio group of Italy, TM, Triumph and Ducati.
In addition to the large capacity motorcycles, there is a large market in smaller capacity (less than 300 cc) motorcycles, mostly concentrated in Asian and African countries. An example is the 1958 Honda Super Cub, which went on to become the biggest selling vehicle of all time, with its 60 millionth unit produced in April 2008. Today, this area is dominated by mostly Indian companies with Hero Honda emerging as the world's largest manufacturer of two wheelers. Other major producers are Bajaj and TVS Motors. For example, its Splendor model has sold more than 8.5 million to date.
MAIN PARTS
 Solenoid Valve
 Ignition Switch
 Battery
 Connecting houses.

Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page
Tagged Pages: 1 mechanical project on auto turning fuel valve 1000 projects,
Popular Searches: inventors, is earth turning into dumping ground methodology procedure, powered by mybb turning, turning, aircraft auto brakes valve control pdf, turning moment on crankshaft ppt, turning headlights in 4 wheelers,

[-]
Quick Reply
Message
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  EMISSIONS REDUCTION USING HYDROGEN FROM PLASMATRON FUEL CONVERTERS smart paper boy 4 3,436 23-02-2016, 02:12 PM
Last Post: seminar report asees
  FEA of Al-SiC Composite in Engine Valve Guides smart paper boy 1 2,564 02-12-2014, 07:51 PM
Last Post: lathiya
  Use Of Hydrogen as Alternative Fuel To Power Vehicles smart paper boy 1 2,849 02-10-2012, 12:38 PM
Last Post: seminar details
  Fabrication of auto-braking system for pre-crash safety using sensor smart paper boy 1 3,007 14-02-2012, 01:14 PM
Last Post: seminar paper
  Fabrication and working model of fuel injection pump smart paper boy 0 2,211 16-08-2011, 04:27 PM
Last Post: smart paper boy
  Fuel Injection in the CI Engine smart paper boy 0 2,036 14-07-2011, 12:11 PM
Last Post: smart paper boy
  DUAL FUEL SIX STROKE ENGINE WITH EGR TECHNOLOGY smart paper boy 0 3,233 24-06-2011, 10:25 AM
Last Post: smart paper boy
  Auto Compression Sprayer smart paper boy 0 1,666 22-06-2011, 10:05 AM
Last Post: smart paper boy
  DESIGN OF AN AUTO-TILTING CAR seminar-database 0 2,608 11-05-2011, 07:51 PM
Last Post: seminar-database
  Multipoint Fuel Injection seminar class 1 4,968 30-04-2011, 11:43 AM
Last Post: seminar class

Forum Jump: