Mobile Controlled Electrical Appliances
Project Introduction:-
This project talks about the basic definitions needed to understand the project better and further defines the technical criteria to be implemented as a part of this project. This project is a teleremote circuit that enables switching ‘ON’ and ‘OFF’ of appliances through telephone lines. It can be used to switch appliances from any distance, overcoming the limited range of infrared and radio remote controls. The circuit described in the project c ....etc

[:=Read Full Message Here=:]

Presentation on One touch Electrical Appliances . It includes all the circuit and IC's with specification. Thanks to maker of this Slide.

http://slidesharepawan2002/one-touch-final1?type=powerpoint ....etc

[:=Read Full Message Here=:]

Controll Electrical Home Appliances with your TV Remore.
Just about every piece of domestic hi-fi or video unit comes with a remote control handset these days. Infrared (IR) remote controls are everywhere. Just about every piece of electronic equipment you can think of has one “ TVs, VCRs, DVDs, hi-fi systems. Even the lastest cameras have them!

Why are they so popular? The answer is simple convenience. You can change TV channels without leaving your chair. Or adjust the volume on your stereo system. Or, in the case ....etc

[:=Read Full Message Here=:]

i want project details ....etc

[:=Read Full Message Here=:]

INFRARED SWITCHING OF ELECTRICAL APPLIANCESUSING EMBEDDED CONTROLLER

DESIGNED
BY
T.Rajasekhar
G.Naresh
K.Madhava

Introduction & Overview

It is an embedded controller circuit to switch on and off electrical appliances.
This system will use normal TV remote control to send the control signal
The TV remote control sends different control signals as per the key pressed.
This control can be used for decoding and select some of the out pin of the micro c ....etc

[:=Read Full Message Here=:]

can u plz provide me full report on this topic............ ....etc

[:=Read Full Message Here=:]

i want to know the circuit diagram for zero voltage switching resonant dc page link inverter using auxilary boost converter and also the logic to turn on the switches.please help me finding the solution ....etc

[:=Read Full Message Here=:]

PRESENTED BY:
KUMAR GAURAV
RUSTAM ANSARI
QUYAMUDDIN KHAN
RAJIV KUMAR BARIK


CONTROLING THE ELECTRICAL APPLIANCES USING PC’S
INTRODUCTION
 It can be used to control the printer as well as house hold and other electrical appliances.
 The computer program included as part of the project controls ‘RELAYS’ through the interface circuit,which in turn, switch the appliances ‘ON’ or ‘OFF’.
 The parallel port has 12 output including 8 data lines and 4 control lines
THE PARALLEL PORT
....etc

[:=Read Full Message Here=:]

ABSTRACT:
This circuit protects refrigerators as well as other electrical appliances from over and under voltage. By the name itself we can say that if the input voltage is more or less than the required voltage then the electrical appliance is turned off nothing but it gets disconnected from its respective power supply.
This circuit uses an operational amplifier IC LM324 which is used as a comparator. Generally, the IC LM324 consists of four operational amplifiers, of which only two operational amplifi ....etc

[:=Read Full Message Here=:]

Dear Sir, one auditorium of 36' x 45' size, have 24 double FTL of 36 watts, in three rows (eight fittings in each row). I want to switch ON/OFF starting from front, first two fittings, then three and three of each row.
Please tell me what are all the items required with cost. And also where I can get the items.

regards
Dominic
[email protected]
....etc

[:=Read Full Message Here=:]