Name– study of RS flip-flop using NAND gates and NOR gates.
Aim – to study the working of RS flip-flop using NAND gates and NOR gates and compare them.
Apparatus – IC 7400, IC 7402, circuit board, power supply +5V DC, LEDs, connecting wires, soldering iron, cutter etc.
Circuit diagrams


Procedure –
1) You are given IC 7400 and IC 7402. Identify the ICs by reading their numbers and details from above given pin configurations.
2) Connect the gates with their ....etc

[:=Read Full Message Here=:]

Name– study of Ex-OR logic using NAND gates as universal building blocks.
Aim – to study the working of Ex-OR gate using derived gates i.e. NAND gates.
Apparatus – IC 7400 and IC 7486, circuit board, power supply +5V DC, LED, connecting wires, soldering iron, cutter etc.
Circuit diagram –


Procedure –
1) Identify the given ICs.
2) Construct the circuit of Ex-OR gate using NAND gates. Use pieces of wires for connections.
3) Connect final output of the circ ....etc

[:=Read Full Message Here=:]

Now a days every advertisement is going to be digital. The big shops and shopping centers are using the digital moving displays now. In Railway station and bus stands everything that is ticket information, platform number etc is displaying in digital moving display. But in these displays if they want to change the message or style they have to go there and connect the display to PC or laptop.Suppose the same message if the person wants to display in main centers of the cities means he have to go there with laptop and change the message by conne ....etc

[:=Read Full Message Here=:]

INTRODUCTION
In a corporate world people seldom find time to visit their doctors. Similarly, in a hospital where a doctor has to attend to many patients it becomes quite impossible for the doctor to monitor a patient continuously. This project provides a simple and inexpensive solution for such patients. Using this project the patients are continuously monitored using various sensors and supporting devices and the output is recorded in a PC kept in the doctor’s room. The doctor can then analyze the recorded data a ....etc

[:=Read Full Message Here=:]

DESCRIPTION OF THE PROJECT
1.1. INTRODUCTION
In this chapter introduction of the PATIENT MONITORING USING GSM AND ZIGBEE FOR HOSPITALS AND OLD AGE HOMES are discussed. It gives overall view of the project design and the related literature and the environment to be considered. Chapter wise organization of the thesis and the appendices is given at the end of this chapter. At first we discuss what the main processing done using 8051 microcontroller is and then what is the process that can be automated which is wi ....etc

[:=Read Full Message Here=:]

hi, im yasmin.. i would to get a coding for this project.. 

For this automated water gate for dam project, the required components are stepper motor, encoder, infrared as input and HyperTerminal as output.
A stepper motor is a DC motor that moves in a discrete steps which means that the motor will rotate one step at a time. This is good for a dam gate because dam gates open at one step at a time. This allow the gate to ....etc

[:=Read Full Message Here=:]

Dear Sir/Madam,
I am Vinod Raj.K, a student of electronics and communications engineering. I saw ur ppt based on wireless patient monitoring system and i need it for ma seminars. So i request you to pls send that ppt to my email id.

regards
Vinod Raj.K ....etc

[:=Read Full Message Here=:]

Presented by:
Uma Rao
S.N.Singh

Abstract

This paper describes power quality audits conducted at hospitals in India. Voltage , current and power measured at various points were used to assess the quality of the power. The main power quality problems found in hospitals were voltage flicker, neutral currents , and harmonic distortion (THD)value. Measurement, analysis and cond-itioning of power quality has been studied in different hospitals as a case study. Recommendations have been made to mitig ....etc

[:=Read Full Message Here=:]

Name– study of universal building blocks – NAND gate and NOR gate.
Aim – to study the construction of basic gates using NAND gates and NOR gates.
Apparatus – IC 7400, IC 7402, circuit board, power supply +5V DC, LED, connecting wires, soldering iron, cutter etc.
Circuit diagrams



Procedure –
1) You are given IC 7400 and IC 7402. Identify the ICs by reading their numbers and details from above given pin configurations.
2) Connect the gates wi ....etc

[:=Read Full Message Here=:]

i need the project reports related to an hospital

project on recruitment and selection process in hospital.pdf
....etc

[:=Read Full Message Here=:]