hi

i nead water level circuit diagram & part list ..............etc

[:=Read Full Message Here=:]

Water-Level Controller
In most houses, water is first stored in an underground tank (UGT) and from there it is pumped up to the overhead tank (OHT) located on the roof. People generally switch on the pump when their taps go dry and switch off the pump when the overhead tank starts overflowing. This results in the unnecessary wastage and sometimes non-availability of water in the case of emergency. The simple circuit presented here makes this system automatic, i.e. it switches on the pump when the water level in the o..............etc

[:=Read Full Message Here=:]

Submitted by:
Piyush Chopra
Abhishek Das Thakur
Akshay Ahuja
Ankush Arya


ABSTRACT
This project presents how we use the sensors and electronics circuit for residential and household purpose.
Here in this project we show that how we use conductive sensor to control the working of pump. Working of the pump is controlled by the water level of the source tank, if the main tank is empty then pump gets automatically on and when it is fully filled then pump’s get automatical..............etc

[:=Read Full Message Here=:]

WORKING PRINCIPLE:



Attach length copper wire to one stick and make two points (top and bottom) on other stick with copper wire; and mark them point A, B, C as shown in the diagram. Connect points A, B and C to the main circuit. The IC 555is used in the circuit as an astable multivibrator. The IC is an 8pin duel-in-line IC. When there is water in between the points A and C, pin no 3 voltage of the IC becomes high and transistor BC 148 op..............etc

[:=Read Full Message Here=:]

plss give me the circuit diagram for water level controller..............etc

[:=Read Full Message Here=:]

Pls post mini projects with Abstract...
thank you..............etc

[:=Read Full Message Here=:]

water level control with dry run and from sump also i need diagram and if available kit price
:)
water level control with dry run and from sump also i need diagram and if available kit price


..............etc

[:=Read Full Message Here=:]

SIMPLE AUTOMATIC WATER-LEVEL CONTROLLER


Water-level controllers are
common nowadays. The
one described here is
built around timer NE555 and
inverter buffer CMOS IC CD4049.
It uses readily-available, low-cost
components, and is easy to build
and install on the over-head
tank (OHT) to prevent wastage of
water.

The circuit works off a 12V battery
or 230V AC mains using a 12V
adaptor. The three sensors built
from non-corrosive metal are fitted
to the OHT as sho..............etc

[:=Read Full Message Here=:]

SHRIDHAN manufactures products that are customized to the need of the customer. Different products have different dimensions, length and physical features. ..............etc

[:=Read Full Message Here=:]

Hello..I want the circuit diagram n block diagram of water level controller vegakit
..............etc

[:=Read Full Message Here=:]