Important..!About optimising machining parameters for alloy steel is Not Asked Yet ? .. Please ASK FOR optimising machining parameters for alloy steel BY CLICK HERE ....Our Team/forum members are ready to help you in free of cost...
Below is stripped version of available tagged cloud pages from web pages.....
Thank you...
Thread / Post Tags
Title: Optimal Closed Die Finish Forgings for Nimonic80-A alloy Using FEM Method
Page Link: Optimal Closed Die Finish Forgings for Nimonic80-A alloy Using FEM Method -
Posted By: smart paper boy
Created at: Monday 29th of August 2011 06:33:34 PM
ABSTRACT:
Conventional closed die forging, is widely used for manufacture of superalloy parts. Despite recent technological advancements in the area of forging design, empirical and trial-and-error methods are still widely used in forging super alloy materials. This paper investigates the effect of flash thickness and various geometrical forging design parameters including internal and external drafts and internal and external corner radii, on the die cavity filling, forging load and raw material cost when forging Nimonic80-A a supera..............etc

[:=Read Full Message Here=:]
Title: ABRASIVE JET MACHINING AND STUDY OF PROCESS PARAMETERS
Page Link: ABRASIVE JET MACHINING AND STUDY OF PROCESS PARAMETERS -
Posted By: seminar surveyer
Created at: Friday 31st of December 2010 08:12:10 PM




Abrasive Jet Machine

Introduction
Abrasive jet machining (AJM) is a non-traditional machining
process that can machine material without generating heat and
shock.
Abrasive jet machining (AJM) is commonly used for Cutting,
Cleaning, Drilling and Etching operation

Mechanism of AJM

Fine particles are accelerated in
gas stream .


The particles are directed towards
the focus of machining.

As the particle impacts the surface,
..............etc

[:=Read Full Message Here=:]
Title: KJV ALLOY CONDUCTORS PVT LTD
Page Link: KJV ALLOY CONDUCTORS PVT LTD -
Posted By: seminar paper
Created at: Monday 12th of March 2012 04:48:16 PM
K.J.V. ALLOY CONDUCTORS PVT. LTD.



COMPANY PROFILE :
We started our operations with manufacturing AAC (All Aluminium Conductor), ACSR (Aluminium Conductor Steel Reinforced), Bare Aluminum Wire & Strips, Bare Aluminum Alloy Wire, in theyear 1989. Subsequently we included AAAC (All Aluminium Alloy Conductor) & Paper Covered (Insulated) Wire & Strips to our product mix for distribution & transmission power lines .

SUPPLIES TO :
..............etc

[:=Read Full Message Here=:]
Title: Guideline for Aluminum Alloy Conductors
Page Link: Guideline for Aluminum Alloy Conductors -
Posted By: seminar addict
Created at: Wednesday 18th of January 2012 07:39:41 PM
Guideline for Aluminum Alloy Conductors for Distribution Feeder Applications with Recommendations for Connections



A Distribution Feeder Installation
1 Distribution feeder conductors in sizes #6 AWG to 1000 kcmil may be copper
or aluminum conductor material (ACM).
i. Aluminum alloy conductors shall be compact stranded conductors of
NUAL® (AA-8030) as manufactured by Alcan Cable or of a recognized
8000 Series aluminum alloy conductor material by the Alum..............etc

[:=Read Full Message Here=:]
Title: synopsis on machine parameters for alloy steel
Page Link: synopsis on machine parameters for alloy steel -
Posted By:
Created at: Sunday 04th of November 2012 07:56:18 PM
details of synopsis on machine parameters for alloy steel...............etc

[:=Read Full Message Here=:]
Title: Abrasive machining and process parameters
Page Link: Abrasive machining and process parameters -
Posted By:
Created at: Thursday 15th of March 2012 01:48:28 AM

Abrasive machining and process parameters..............etc

[:=Read Full Message Here=:]
Title: abrasive machining and process parameters
Page Link: abrasive machining and process parameters -
Posted By:
Created at: Thursday 15th of March 2012 01:32:23 AM

..............etc

[:=Read Full Message Here=:]
Title: optimising free space optics for wireless networks seminars report needed
Page Link: optimising free space optics for wireless networks seminars report needed -
Posted By: shafrin
Created at: Friday 29th of October 2010 09:05:11 PM
optimising free space optics for wireless networks seminar report and slide needed some one please help
some good electrical project reports are also welcomed..............etc

[:=Read Full Message Here=:]
Title: synopsis for optimising the machining parameters of alloy steel
Page Link: synopsis for optimising the machining parameters of alloy steel -
Posted By:
Created at: Sunday 28th of October 2012 03:08:47 AM
http seminarprojects org t synopsis for optimising the machining parameters of alloy steel, synopsis for optimising the machining parameters for alloy steel, optimising the machining parameter for alloy steel, optimising machining parameters for alloy steel, synopsis for machining parameters for alloy steel, the machining parameter for alloy steel, write a synopsis for optimising the machining parameter for alloy steel,
synopsis for optimising the machining parameters of alloy steel
synopsis for optimising the machining parameters of alloy steel..............etc

[:=Read Full Message Here=:]
Title: Laser Beam Welding of 5182 Aluminum Alloy Sheet
Page Link: Laser Beam Welding of 5182 Aluminum Alloy Sheet -
Posted By: smart paper boy
Created at: Thursday 28th of July 2011 12:54:05 PM
Abstract
Conditions were determined for consistent coupling of a CO2 laser beam to weld 5182 aluminum
alloy sheet. Full penetration butt and bead-on-plate welds on 0.8 and 1.8 mm sheets were
performed. Process conditions examined included beam mode, spot size and irradiance,
shielding gas flow, and edge quality and fitup. The observed weld quality variations with the
different process parameters were consistent with physical phenomena and a threshold irradiance
model. Optimal conditions were determined for obtaining consistent wel..............etc

[:=Read Full Message Here=:]
Please report us any abuse/complaint to "omegawebs @ gmail.com"


Contact Us | Student Seminar Report & Project Report With Presentation (PPT,PDF,DOC,ZIP) | Return to Top | Lite (Archive) Mode | RSS Syndication