Submitted By
Shivek dhar


ABSTRACT
Gone through a rigorous four weeks training under the guidance of capable engineers and workers of bajaj motors limited, headed by the executive director of the company Mr. J.C Jha in the machining plant situated in Narsinghpur, Gurgaon, Haryana.
The training was specified under the CAMSHAFT department of the machining unit. Working under the cam machining department the basic grinding, scaling and machining was shown on heavy to medium duty lathes planted in the same ..............etc

[:=Read Full Message Here=:]

..............etc

[:=Read Full Message Here=:]

Camshaft


Double overhead cams control the opening and closing of the valves
The camshaft is used in IC Engines to operate poppet valves. It consists of a cylindrical rod running the length of the cylinder bank with a number of oblong lobes or cams protruding from it, one for each valve. The cams force the valves open by pressing on the valve, or on some intermediate mechanism, as they rotate.
The relationship between the rotation o..............etc

[:=Read Full Message Here=:]

sir, i need a ppt on manufacturing process of 500mw stator winding..............etc

[:=Read Full Message Here=:]

OVERHEAD CAMSHAFT ENGINE
* INTRODUCTION :-
OHV means OverHead Valve –
An engine design where the camshaft is installed inside the engine block and valves are operated through lifters, pushrods and rocker arms (an OHV engine also known as Pushrod engine).
Although an OHV design is a bit outdated, it has been successfully used for decades. An OHV engine is very simple, has more compact size and proven to be durable.
* Classification :-
Single OverHead Cam
Double OverHead Cam
Pushrod Engines
* Single O..............etc

[:=Read Full Message Here=:]

..............etc

[:=Read Full Message Here=:]

Hello,

Presently I am using forging for manufacturing cam shaft.

The yield I am achieving 60%.To improve the yield to 75 % do you have any alternate process please provide.

Material : Low Carbon Steel.

Application : Used in Fuel Injection Pump operates at 1500 Rpm and Higher load...............etc

[:=Read Full Message Here=:]

Please give me detailed material on Principal and advantages & different types of generative manufacturing process..............etc

[:=Read Full Message Here=:]

please provide ppt for manufacturing process of steam turbine blades..............etc

[:=Read Full Message Here=:]

Altezza camshafts reassembling and timing..............etc

[:=Read Full Message Here=:]