DRIP IRRIGATION AND CLOGGING IN DRIP IRRIGATION

INTRODUCTION
Drip irrigation is a method of applying water or frequent application of water to crops through small emitters in the vicinity of root zone, wetting a limited amount of surface area and depth of soil.

DRIP IRRIGATION SYSTEM
In drip system water is conveyed through a system of flexible pipe lines
Drip system reduces water requirement of the plant by maintaining minimum soil moisture, equal to field capacity.

SYSTEM COMPONENTS
A ..............etc

[:=Read Full Message Here=:]

if in stead of 2 copper wires we have to use to indicate moisture level of the soil in case of considering the hole ground ..............etc

[:=Read Full Message Here=:]

research on mpact of lift irrigation canal projects on agricultural environment..............etc

[:=Read Full Message Here=:]

Lift irrigation project ... plz help for complete this project. ... content of project is showing..............etc

[:=Read Full Message Here=:]

VTEC (standing for Variable valve Timing and lift Electronic Control) is a system developed by Honda to improve the combustion efficiency of its internal combustion engines throughout the RPM range. This was the first system of its kind and eventually led to different types of variable valve timing and lift control systems that were later designed by other manufacturers (VVTL-i from Toyota, VarioCam Plus from Porsche, and so on). It was invented by Honda's chief engine designer Kenichi Nagahiro...............etc

[:=Read Full Message Here=:]

Prepared by:
SHAMEER N

Under the guidance of
Dr. S ASHOK


Introduction

In the fast developing world, height of the buildings increased tremendously and the lift has become more of a necessary rather than luxury. When the number of floor increased the control mechanism required for the lift will become more complex. Programmable Logic Controllers are widely accepted industrial control device. With the growth in technology PLCs are now capable of advanced data manipulations, communications..............etc

[:=Read Full Message Here=:]

sir
i m pankaj patnaik ,b-tech final year doing lift irrigation project,so please give me some material regarding lift irrigation...............etc

[:=Read Full Message Here=:]

sir/madam,
i want know the more details about Advantage and disadvantages of lift irrigation..............etc

[:=Read Full Message Here=:]

Introduction

In general the forklift can be defined as a tool capable of lifting hundreds of kilograms. A forklift is a vehicle similar to a small truck that has two metal forks on the front used to lift cargo. The forklift operator drives the forklift forward until the forks push under the cargo, and can then lift the cargo several feet in the air by operating the forks. The forks, also known as blades or tines, are usually made out of steel and can lift up to a few tons.
Forklifts are either powered by gasoline, propane, o..............etc

[:=Read Full Message Here=:]

thanks for ur kind information buddy and i will be highly grate ful to u if u snd mre the ppt
..............etc

[:=Read Full Message Here=:]