25-04-2017, 12:36 PM
The included built-in storage tank is an internal storage tank, enclosed externally within a weather-resistant outdoor reservoir to ensure that any leakage or overfill situation is contained safely.
The storage tank recessed in the rectangular top is easily transportable as a one piece unit and reduces costly and time consuming work.
Being a fully self-contained, ready-to-use sealed unit, makes it easily movable when empty and low maintenance as rainwater can not enter the folded area.
The tank is delivered by the transport of JA Envirokanks to the customers' facilities. If at a later date a new site is required for the included storage tank, the contents must be emptied, cleaned internally, lifted and transported to its new location. Internal tank Manufactured in accordance with BS 799 1975 Part 5.
Advantages
• Resistant to the weather
• Retrench of space
• Compliance with pollution control standards
• Reduces costly site work
• You only need an adequate solid foundation
• Easily transportable
• Overfilled product can be reused from the Bund
• Sizes / capacity to fit customer's footprints or site limitations
• Oil-resistant paint finish
• Customers have own colors can be accommodated on request
Additional Accessories
• 65 mm filling tube with valve and cap without spark
• Complete 65 mm ventilation tube
• 25mm sludge drainage tube complete with stopper
• 40 mm extraction tube with valve
• All valves can be supplied with locking clamp if necessary
• Hydrostatic content indicator 150 mm calibrated in liters
• Overfill warning and alarm panel
• Full dipstick with immersion tube and non-sparkling cap
• High-speed fuel pump pump installed in a pump holder and wired to an isolation switch. The pump is supplied complete with a 3m hose and automatic nozzle. This is suitable for supplying trucks, vans, etc.
• Standard speed fuel pump pump suitable for trucks, vans, etc., wired in an isolating switch. The supplied pump is complete with 3m hose and nozzle
• Fuel monitoring equipment to meet customer needs
• An integral safety cabinet with spill container installed at the end of the tank to accommodate the filling tube, manometer, distribution pump, etc. This can be supplied open either with a rolling shutter or a hinged door. The cabinet will extend the total length of the unit by 750 mm. Lighting can be provided if necessary
• A caged ladder and platform is available in a hot dip galvanized finish.
The storage tank recessed in the rectangular top is easily transportable as a one piece unit and reduces costly and time consuming work.
Being a fully self-contained, ready-to-use sealed unit, makes it easily movable when empty and low maintenance as rainwater can not enter the folded area.
The tank is delivered by the transport of JA Envirokanks to the customers' facilities. If at a later date a new site is required for the included storage tank, the contents must be emptied, cleaned internally, lifted and transported to its new location. Internal tank Manufactured in accordance with BS 799 1975 Part 5.
Advantages
• Resistant to the weather
• Retrench of space
• Compliance with pollution control standards
• Reduces costly site work
• You only need an adequate solid foundation
• Easily transportable
• Overfilled product can be reused from the Bund
• Sizes / capacity to fit customer's footprints or site limitations
• Oil-resistant paint finish
• Customers have own colors can be accommodated on request
Additional Accessories
• 65 mm filling tube with valve and cap without spark
• Complete 65 mm ventilation tube
• 25mm sludge drainage tube complete with stopper
• 40 mm extraction tube with valve
• All valves can be supplied with locking clamp if necessary
• Hydrostatic content indicator 150 mm calibrated in liters
• Overfill warning and alarm panel
• Full dipstick with immersion tube and non-sparkling cap
• High-speed fuel pump pump installed in a pump holder and wired to an isolation switch. The pump is supplied complete with a 3m hose and automatic nozzle. This is suitable for supplying trucks, vans, etc.
• Standard speed fuel pump pump suitable for trucks, vans, etc., wired in an isolating switch. The supplied pump is complete with 3m hose and nozzle
• Fuel monitoring equipment to meet customer needs
• An integral safety cabinet with spill container installed at the end of the tank to accommodate the filling tube, manometer, distribution pump, etc. This can be supplied open either with a rolling shutter or a hinged door. The cabinet will extend the total length of the unit by 750 mm. Lighting can be provided if necessary
• A caged ladder and platform is available in a hot dip galvanized finish.