25-03-2017, 11:35 AM
A motor vehicle waste disposal well is a shallow disposal system that receives fluids from vehicle repair or maintenance activities in the types of stores listed above. Motor vehicle waste disposal wells are regulated as Class V injection wells. Typical motor vehicle waste disposal wells are floor drains or sinks in service bays that are connected to a septic system or are Dry well. However, any underground system that receives wastes from motor vehicles is considered a waste disposal well for motor vehicles. For example, black wells, watersheds, and sinkholes are considered to be motor vehicle waste disposal wells if they receive motor vehicle waste.
Cars are one of the most recycled commercial products. Currently, approximately 75% of the total weight of the vehicle is recycled. End-of-life vehicles try to push the recycling process even further: it set the percentage of recyclability (85%) and resilience (95%). The motivation for this work comes first from the observation of the material consumption of the automotive industry. The car is an important material consumer. Today, 95% of all vehicles go through the recycling process at the end of their useful life. This collection rate is very high. In comparison, it is only 52%, 55% and 42% for household appliances, the efficiency of the recycling industry leads to 75% of the weight of the vehicle recycled. Finally, the remaining 25%, known as Automatic Destroyer Waste (ASR), goes to the landfill. ASR is mainly composed of foams and lint (40-52%), plastics (20-27%), rubbers (18-22%) and metals (4-15%) and there is currently no profitable technology for recycling plastics And foam.
Cars are one of the most recycled commercial products. Currently, approximately 75% of the total weight of the vehicle is recycled. End-of-life vehicles try to push the recycling process even further: it set the percentage of recyclability (85%) and resilience (95%). The motivation for this work comes first from the observation of the material consumption of the automotive industry. The car is an important material consumer. Today, 95% of all vehicles go through the recycling process at the end of their useful life. This collection rate is very high. In comparison, it is only 52%, 55% and 42% for household appliances, the efficiency of the recycling industry leads to 75% of the weight of the vehicle recycled. Finally, the remaining 25%, known as Automatic Destroyer Waste (ASR), goes to the landfill. ASR is mainly composed of foams and lint (40-52%), plastics (20-27%), rubbers (18-22%) and metals (4-15%) and there is currently no profitable technology for recycling plastics And foam.