16-03-2017, 09:20 AM
Solenoid switch as the main device to lock the front wheel of the two wheels (disc braking system only) Now we are adopting this configuration only for the disc braking systems involved bicycles.
The solenoid is a device that operates in linear motion. It consists of plunger, the plunger moves in the TOO & FRO direction, when connected to the source of the battery. In the disc brake system, the brake lever is used to activate the disc brake action. Our plan is to use the solenoid to activate the disc brake action when the ignition key is in the OFF phase.
So we need the program to control the function of the solenoid. The program must be such that when the motorcycle in IDLE STATE or IGNITION KEY IN OFF, at that time if an unauthorized person tries to move it, then, after certain rotations of the front wheel the MICROCONTROLLER must take action with a Sensor help by the rotation of the front wheel and must activate the function of the solenoid.
The brake lever on the disc brake system allows the disc brake functions. The plan is about to activate the disc brake functions while the ignition key is held in the OFF step. Therefore, the program manages the actions of the solenoid. Programs must be in the form of an inactive state or the ignition key. When an unknown person moves the motorcycle then the microcontroller must perform an action analyzing the movement of the front wheel and must activate the action of the solenoid.
The solenoid is a device that operates in linear motion. It consists of plunger, the plunger moves in the TOO & FRO direction, when connected to the source of the battery. In the disc brake system, the brake lever is used to activate the disc brake action. Our plan is to use the solenoid to activate the disc brake action when the ignition key is in the OFF phase.
So we need the program to control the function of the solenoid. The program must be such that when the motorcycle in IDLE STATE or IGNITION KEY IN OFF, at that time if an unauthorized person tries to move it, then, after certain rotations of the front wheel the MICROCONTROLLER must take action with a Sensor help by the rotation of the front wheel and must activate the function of the solenoid.
The brake lever on the disc brake system allows the disc brake functions. The plan is about to activate the disc brake functions while the ignition key is held in the OFF step. Therefore, the program manages the actions of the solenoid. Programs must be in the form of an inactive state or the ignition key. When an unknown person moves the motorcycle then the microcontroller must perform an action analyzing the movement of the front wheel and must activate the action of the solenoid.