13-03-2017, 12:05 PM
Stabilization of the soil by plastic
The use of plastic products such as plastic bags, bottles, containers and packaging tapes, etc., is increasing day by day. As a result the amount of plastic waste increases. This will lead to several environmental problems. Much of the waste produced in the environment for many years, giving rise to various environmental problems. Therefore, it is necessary that the waste can be used effectively with the technical development in each area. Many products are made from plastic waste. This article presents the details of several researchers on the possible use of plastic waste for soil stabilization studies. The results of the study show that the addition of plastic strips in the soil; Increased shear strength, tensile strength and bearing ratio of California (CBR) soil.
Soil stabilization is any process that improves the physical properties of the soil, such as shear strength, resilience, can be suitable materials of cement, lime and fly ash as controlled residues, phosphogenesis, etc. By compression or use Additives costs for the introduction of these additives has increased in recent years opened the door wide for the development of other types of additives for the floor, such as plastic, bamboo, etc. Actually used this new technique Soil stabilization to meet the challenges of society, To waste, not to reduce the production of valuable materials of the waste makes sense. The use of plastic products such as plastic bags, bottles, etc., is increasing day by day, leading to several environmental problems. Therefore, the disposal of plastic waste without environmental risks has become a real challenge. Therefore, the use of plastic bottles is like a soil stabilizer is a useful, since there is no shortage of good quality soil for embankments. This project involves the detailed study of the possible use of waste plastic bottles for soil stabilization. The analysis has been filled by testing the load floor panels with layers of plastic bottles with sand and half bottle in the middle and a third tank of the reinforced reinforced positions executed. Comparison of the results of the tests showed that the jars cut in the central position were more effective to increase the resistance of the soil. The optimal ratio of the plastic strip on the bottom was found by the California Bearing Ratio test and the use of this percentage of plastic, plaque loading test was also performed. The size and content of discarded plastic bottles have a significant impact on improving soil resistance.
The use of plastic products such as plastic bags, bottles, containers and packaging tapes, etc., is increasing day by day. The elimination of plastic waste without environmental risks has become a real challenge for our society. Therefore, the use of plastic bottles is like a soil stabilizer is a cost-effective and cost-effective use, since the shortage of good quality soil for embankments and fillings. Therefore, this project is the challenges of society, not the amount of plastic waste, the production of valuable waste materials makes sense to reduce the creation of a sustainable society.