Request for the project description and details
Posts: 14,118
Threads: 61
Joined: Oct 2014
On the roads, the circuit breakers provided to control the speed of traffic in the rush zones. The potential energy in terms of vehicle weight is the loss in the speed switch can be used for useful purposes. This article describes the potential energy of this type of energy available on highways and its use for useful jobs. The steps of developing a speed circuit breaker and the mechanism for generating electricity using rack, pinion and speed are described by increasing the gearbox and generator and storing compressed air with the aid of the piston cylinder compression device. Each time the vehicle is allowed to pass over the dome of the speed switch, it is pressed down.
As the springs are attached to the dome, they are compressed and the grid, which is attached to the bottom of the dome, moves downward in reciprocating motion. Since the frame has teeth connected to the pinion, there is a conversion of the reciprocating movement of the rack into the rotational movement of the pinion, but the two gears rotate in the opposite direction. So that the axes will rotate with certain RPM these axes are connected through a transmission by belt to the generators, that converts the mechanical energy into electrical energy. The rack is attached to the piston rod of the cylinder so that the downward stroke of the frame we can use for the compression of the air in the tank, with the help of the arrangement of the piston cylinder. A reciprocating piston cylinder arrangement simultaneously compresses the air and stores it in the reservoir. We can use the generated electricity and compressed air for different purposes.