16-04-2017, 02:59 PM
Main objective of the triangular air compressor
|
triangular air compressor with common compression chamber
|
17-04-2017, 04:50 PM
The compressor is a mechanical equipment that is used to increase the pressure with the help of the piston. Need to improve compressor performance by several methods. The main objective of the project is to make tri-cylinder air compressor to generate large amount of air with less power and low vibration. In the three-cylinder air compressor the three cylinders are held at 120 degrees to each other. The three cylinders are positioned in a radical and equally spaced manner, so that the opening of the cylinder tends to meet in a common triangular compression chamber. The three pistons are made to compress the air simultaneously in the shortest common triangular angular chamber and the isothermal efficiency will be better than a single cylinder with a piston. The motor is connected to the chain drive to drive the crank shaft that is used to move the piston. If the space is smaller, the pressure will be increasing. If the compressor is made to work at 1400 rpm the air taken will be 147.18 × 1400 = 206052 liters at 7 atmospheres of pressure. The advantage with the triangular compressor will be the low vibration, smaller unit giving more output and so cheaper to do, ideal for air compressor It is air conditioning and refrigeration, vacuum pumps and general use.
It can be understood in the following video:
|
« Next Oldest | Next Newest »
|
Important Note..!
If you are not satisfied with above reply ,..PleaseASK HERE
So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page| Popular Searches: ppt on combustion chamber, seminar on combustion of chamber in s i engine, ppt on combustion chamber in si engine, triangular antenna, blast chamber, chamber, m combustion chamber, |
