Signaling System #7
#1

presented by:
KAMAL RAJ SINGH

[attachment=9328]
Types of Signaling
Signaling in Telecommunications Network
Channel Associated Signaling (CAS)
Common Channel Signaling (CCS)
Channel Associated Signaling (CAS) :-
Used for In-Band Signaling .
Signaling is transmitted in the same frequency band as used by voice.
Common Channel Signaling (CCS):-
Out of Band signaling
Employs separate, dedicated path for signaling.
Voice trunks are used only when a connection is established, not before.
Faster Call Setup.
Signaling System Number (SS7) is a form of Common Channel Signaling
SS7 protocol used by the telephone companies for interoffice signaling
SS7 Protocol Architecture
The SS7 User Part: Provides call control and management function and call set-up capabilities to the network. These higher layers in the SS7 utilize the transport facility provided by MTP(Message transfer part) and SCCP (signaling connection control part)
ISDN User Part (ISUP)
Used to set up telephone calls in PSTN
When a telephone call is set up from one subscriber to another, many telephone exchanges will be involved, possibly across international boundaries.
To allow a call to be set up correctly, where ISUP is supported, a switch will signal call-related information to the next switch in the network using ISUP messages.
The telephone exchanges are connected via trunks which transport the speech from the calls.
These trunks are divided into 64 Kbit/s timeslots, and one timeslot can carry exactly one call.
Each timeslot between two switches is uniquely identified by a Circuit Identification Code (CIC) that is included in the ISUP messages.
The exchange uses this information along with the received signaling information (especially the Called Party Number) to determine which inbound CICs and outbound CICs should be connected together to provide an end to end speech path.
Transaction Capabilities Applications Part (TCAP)
Its primary purpose is to facilitate multiple concurrent dialogs between the same sub-systems on the same machines, using Transaction IDs to differentiate these, similar to the way TCP ports facilitate multiplexing connections between the same IP addresses on the Internet .
TCAP messages are sent over the wire between machines.
Operation Maintenance and Administration part (OMAP)
OMAP is a TCAP application for network management i.e. monitoring ,coordination and control function for trouble free communication
Signaling Traffic in SS7
Maximum signaling traffic in a network is generated by Call set-ups, inter-MSC handoffs and location update
Setting up of a call requires exchange of information about the location of calling subscriber and information about the location about the called subscriber
Either one or both subscriber can be mobile
When any of mobile subscriber switches MSCs under a handoff condition , it adds to the amount of information exchanged
Location update records are updated in the network whenever a subscriber moves to a new location
Signaling Load For a Call setup and Handoffs in GSM
Signaling load for location updating in GSM
SS7 Services
Touchstar
This kind of service is also known as CLASS
This is a group of switch-controlled services that provide its users with certain call management capabilities
Services provided are Call return, Call forwarding, Repeat dialing, Call block ,Call tracing and Caller ID
800 services
These services were introduced by Bell System to provide toll-free access to the calling party to the services and database which is offered by the private parties
The costs associated with the processing of calls is paid by the service subscriber
The service is offered under two plans known as the 800-NXX plan and the 800 database plan
In 800-NXX plan the first six digits of an 800 call are used to select the interexchange carrier (IXC)
In the 800 data database plan , the call is looked up in a database to determine the appropriate carrier and routing information
Alternating Billing Services And Line Information Database (ADB/LIDB)
These services use the CCS network to enable the calling party to bill a call to a personal number (third party number, calling card , or collect etc.) from any number

Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page
Popular Searches: signaling system, communication signaling technology ppt, railway signaling ppt, railway signaling and communications, ss7 mnp, signaling system 7 seminar, low voltage signaling,

[-]
Quick Reply
Message
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Forum Jump: