10-06-2010, 11:52 PM
1) Short term load forecasting using fuzzy logic, neuro fuzzy
2) Efficiency optimization of induction motor using fuzzy logic
3) Automatic generation control using fuzzy logic and other AI techniques
4) Improvement in dynamic response of dc and ac motors using fuzzy logic
5) Simulation of vector controlled scheme for speed control of induction motor drive using fuzzy logic controller
6) Load scheduling using genetic algorithm
7) Speed control of dc motor using fuzzy logic and implemented by micro controller
8) Identification and control of induction motor using artificial neural networks
9) Design of artificial neural networks for fault detection of induction motor
10) Mathematical modeling and simulation analysis of slip power recovery drive
11) Transient analysis of induction motor using matlab
12) Induction motor stator resistance estimation
13) Design and reliability analysis of power converter for programming interface of ECM
14) Graphical user interface based visual display of operation and performance of a phase induction motor
15) Automatic control of distribution generation system
16) Improvement in dynamic response of dc and ac motors with pid controller
17) ECONOMIC LOAD DISPATCH USING PARTICLE SWARM OPTIMIZATION
18) ECONOMIC LOAD DISPATCH USING GENETIC ALGORITHMS
19) POWER QUALITY EVENT DETECTION USING ARTIFICIAL INTELLIGENCE TOOLS
20) TUNING OF CONTROLLERS FOR DISTRIBUTED GENERATION SYSTEMS
21) STUDY AND ANALYSIS OF A MICRO GRID
22) DFIG BASED WIND POWER GENERATION
23) PERFORMANCE ANALYSIS OF FUEL CELL
24) Optimal placement of capacitor banks in radial distribution netowrks using microgenetic algorithm and fuzzy logic
25) Load flow study of a upfc embedded system
26) Tuning of pid controllers in automatic generation control
27) Load-flow analysis by
28) Augmented load flow analysis
29) AC/DC load flow studies
30) Modeling and simulation of static synchronous series compensator (sssc)
31) D- STATCOM in distribution network for voltage / power factor control
32) Voltage sag mitigation techniques by distribution static compensator and dynamic voltage restorer (DVR and D-STATCOM)
33) integral starter generator (isg)
34) Solution to sparse linear equations and its applications to fast decoupled load flow solution analysis using c and c++
35) Computer applications to power systems- a load flow analysis
36) Intelligent techniques for robust self tuning controllers
37) MATHEMATICAL MODELLING AND SIMULATION ANALYSIS OF DC MOTOR (BLDC)
38) GENETIC ALGORITHM SOLUTION TO ECONOMIC DISPATCH WITH MULTIPLE FUEL OPTIONS
39) DECOUPLED POWER FLOW ANALYSIS ALGORITHM IN MATLAB
40) Load scheduling using artificial neural networks
41) Load-flow analysis by artificial neural networks
42) Power system fault detection using wave let transforms and probabilistic neural networks
43) Automatic generation control using artificial neural networks and other AI techniques
44) Load frequency control of two area power system using artificial neural networks
45) Short term load forecasting using artificial neural networks
46) Power system stabilizer based on artificial neural networks
47) Load scheduling using
48) Speed control of DC motor using fuzzy logic
49) Load balancing and power factor correction by using active power filter
50) Simulation analysis of three phase / switched reluctance motor
51) Performance of PMBLDC motor
52) Chaos- study analysis Adaptive controllers design for permanent magnet linear synchronous motor control system
53) Image and data compression using DCT and MELLIN transforms
54) Developments of test methodology and test cases for ipv validation testing tool
55) Blind de convolution for image restoration using matlab
56) video compression by sub-band coding using wavelets
57) sequential jpeg image compression
58) Embedded systems (micro controllers):
59) Two telephone lines intercom
60) Auto control of ph induction motor
61) Caller id
62) Code lock
63) Electronic cash register
64) Electronic voting machine
65) Fingerprint security
66) Fire fight robot
67) Home automation over internet
68) Home security
69) Ir remote switch
70) Line follower robot
71) Night light saver
72) Parallel telephone line
73) Design of power system stabilizer using pole placement design
74) Performance analysis of unified power flow controller
75) Unified power flow controller (UPFC) based damping controllers
76) Sensor less control of induction motor using adaptive, state space and kalman filter method
77) Evaluation of transmission losses in radial distribution system
78) Allocating the costs of reactive power purchased in an ancillary service market by modified y bus matrix method
79) Design of fuzzy logic controller using neural network
80) PID controller for improved performance by using model reduction method
81) Tuning of PID controller using fuzzy logic
82) Fuzzy logic controller for flight vehicle stabilization
83) Hand written text character recognition using generalized PID gradient decent back propagation algorithm
84) Armature control of DC motor
85) Mathematical modeling and simulation analysis of brushless dc motor (BLDC)
86) Control system modeling and analysis using matlab
87) Optimization of fuzzy logic using genetic algorithm
88) Development of neural networks for system identification
89) ARX identification using GA
90) Automatic break control system using artificial neural networks
91) Fuzzy logic controller for semi active control a
92) Mathematical modeling and simulation analysis of dc motor (BLDC)
93) Robust control of given system with artificial neural networks
94) Simulation of code division multiple ACCES
95) An H-infinity approach to robust channel estimation for OFDM wireless communication analysis
96) Analysis of cardiatic signal using signal processing method
97) Simulation of WCDMA system and DS-CDMA system
98) D motion estimation using monocular sequence of images
99) Robust PID controller design using interval analysis
100) Knowledge based sequential/online learning multi category neural classifier
101) OPTIMAL PLACEMENT OF CAPACITORS IN POWER SYSTEM
102) LOAD SCHEDULING USING ARTIFICIAL NEURAL NETWORKS /PSO/BFA
103) LOAD-FLOW ANALYSIS BY ARTIFICIAL NEURAL NETWORKS
104) POWER SYSTEM FAULT DETECTION USING WAVE LET TRANSFORMS AND PROBABILISTIC NEURAL NETWORKS
105) AUTOMATIC GENERATION CONTROL USING ARTIFICIAL NEURAL NETWORKS AND OTHER AI TECHNIQUES
106) LOAD FREQUENCY CONTROL OF TWO AREA POWER SYSTEM USING ARTIFICIAL NEURAL NETWORKS
107) SHORT TERM LOAD FORECASTING USING ARTIFICIAL NEURAL NETWORKS
108) POWER SYSTEM STABILIZER BASED ON ARTIFICIAL NEURAL NETWORKS
109) SPEED CONTROL OF DC MOTOR USING FUZZY LOGIC
110) SHORT TERM LOAD FORECASTING USING NEURAL NETWORKS, FUZZY LOGIC, NEURO FUZZY
111) EFFICIENCY OPTIMISATION OF INDUCTION MOTOR USING FUZZY LOGIC
112) Implementation of multi user detection using gradient projection method
113) Face recognition using eigen faces
114) Implementation of echo chancellor using kalman filter algorithm
115) Performance of evaluation of spread spectrum communication system using matlab
116) Design and development of fixed cellular terminal
117) MSS reporting terminal
118) Speech recognition using wavelets
119) Sampling rate converter and digital equalizer
120) Adaptive noise cancellation
121) Password based door lock
122) Remote controlled switch board fan +
123) Rf based auto meter reading
124) Rf based remote control
125) Room light controller
126) SMS through telephone
127) Telephone control motor
128) Temp control fan regulator
129) Temperature indicator
130) Time operated electric control
131) Speaker identification using mfcc and neural networks
132) Speaker identification using K-Nearest Neighbor Technique
133) ECG Arrhythmia classification using Wavelet transform and Neural Networks
134) Text feature selection by TF-IDF method and classification using Neural Networks
135) -D Human tracking using artificial intelligence
136) Handwritten digit recognition using artificial intelligence machine
137) System identification using intelligent tools
138) Evaluation of cars based on artificial intelligent paradigms
139) Face recognition using Artificial intelligence
140) GUI based speaker identification using Artificial Intelligence
141) Optimal path planning for robot navigation using higher geometry maze routing approach
142) Development of Control Laws for Attitude Control of Satellites with Flexible Appendages using Nonlinear Control Techniques
143) Target tracking using sensor fusion
144) MATHEMATICAL MODELLING AND SIMULATION ANALYSIS OF SLIP POWER RECOVERY DRIVE
145) TRASINET ANALYSIS OF INDUCTION MOTOR USING MATLAB
146) INDUCTION MOTOR STATOR RESISTANCE ESTIMATION
147) DESIGN AND RELIABILITY ANALYSIS OF POWER CONVERTER FOR PROGRAMMING INTERFACE OF ECM
148) GRAPHICAL USER INTERFACE BASED VISUAL DISPLAY OF OPERATION AND PERFORMANCE OF A PHASE INDUCTION MOTOR
149) AUTOMATIC CONTROL OF DISTRIBUTION GENERATION SYSTEM
150) IMPROVEMENT IN DYNAMIC RESPONSE OF DC AND AC MOTORS WITH PID CONTROLLER
151) LOAD BALANCING AND POWER FACTOR CORRECTION BY USING ACTIVE POWER FILTER
152) LOAD-FLOW ANALYSIS BY ANN
153) AUGMENTED LOAD FLOW ANALSIS
154) AC/DC LOAD FLOW STUDIES
155) MODELLING AND SIMULATION OF STATIC SYSNCHRONOUS SERIES COMPENSATOR (SSSC)
156) D- STATCOM IN DISTRIBUTION NETOERK FOR VOLTAGE / POWER FACTOR CONTROL
157) VOLTAGE SAG MITIGATION TECHNIQUES BY DISTRIBUTION STATIC COMPENSATOR AND DYNAMIC VOLTAGE RESTORER (DVR AND D-STATCOM)
158) INTEGRAL STARTER GENERATOR (ISG)
159) SOLUTION TO SPARSE LINEAR EQUATIONS AND ITS APPLICATIONS TO FAST DECOUPLED LOAD FLOW SOLUTION ANALYSIS USING C AND C++
160) COMPUTER APPLICATIONS TO POWER SYSTEMS- A LOAD FLOW ANALYSIS
161) INTELLGIENT TECHNIQUES FOR ROBUST SELF TUNING CONTROLLERS
162) DESIGN OF FUZZY LOGIC CONTROLLER USING NEURAL NETWORK
163) PID CONTROLLER FOR IMPROVED PERFORMANCE BY USING MODEL REDUCTION METHOD
164) TUNING OF PID CONTROLLER USING FUZZY LOGIC
165) FUZZY LOGIC CONTROLLER FOR FLIGHT VEHCLE STABILIZATION
166) HAND WRITTEN TEXT CHARACTER RECOGNITION USING GENERALISED PID GRADIENT DECENT BACK PROPAGATION ALGORITHM
167) ARMATURE CONTROL OF DC MOTOR
168) CONTROL SYSTEM MODELING AND ANALYSIS USING MATLAB
169) OPTIMIZATION OF FUZZY LOGIC USING GENETIC ALGORITHM
170) DEVELOPMENT OF NEURAL NETWORKS FOR SYSTEM IDENTIFICATION
171) ARX IDENTIFICATION USING GA
172) AUTOMATIC BRAK CONTROL SYSTEM USING ARTIFICIAL NEURAL NETWORKS
173) FUZZY LOGIC CONTROLLER FOR SEMI ACTIVE CONNTROL
174) IMPROVEMENT IN DYNAMIC RESPONSE OF DC AND AC MOTORS USING FUZZY LOGIC
175) SIMULATION OF VECTOR CONTROLLED SCHEME FOR SPEED CONTROL OF INDUCTION MOTOR DRIVE USING FUZZY LOGIC CONTROLLER
176) LOAD SCHEDULING USING GENETIC ALGORITHM
177) SPEED CONTROL OF DC MOTOR USING FUZZY LOGIC AND
178) IDENTIFICATION AND CONTROL OF INDUCTION MOTOR USING ARTIFICIAL NEURAL NETWORKS
179) DESIGN OF ARTIFICIAL NEURAL NETWORKS FOR FAULT DETECTION OF INDUCTION MOTOR
180) ROBUST CONTROL OF GIVEN SYSTEM WITH ARTIFICIAL NEURAL NETWORKS
181) Hand gesture recognition using Artificial Intelligence
182) SIMULATION ANALYSIS OF THREE PHASE / SWITCHED RELUCTANCE MOTOR
183) PERFORMANCE OF PMBLDC MOTOR
184) CHAOS- STUDY ANALYSIS
185) ADAPTIVE CONTROLLERS DESIGN FOR PERMANENT MAGNET LINEAR SYNCHRONOUS MOTOR CONTROL SYSTEM
186) DESIGN OF POWER SYSSTEM STABILISER USING POLE PLACEMENT DESIGN
187) PERFORMANCE ANALYSIS OF UNIFIED POWER FLOW CONTRTOLLER
188) UNIFIED POWER FLOW CONTROLLER (UPFC) BASED DAMPING CONTROLLERS
189) SENSORLESSCONTROL OF INDUCTION MOTOR USING ADAPTIVEFLUXOBSERVER, STATE SPACE AND KALMAN FILTER METHOD
190) EVALUATION OF TRANSMISSION LOSSES IN RADIAL DISTRIBUTION SYSTEM
191) ALLOCATING THE COSTS OF REACTIVE POWER PURCHASED IN AN ANCILLARY SERVICE MARKET BY MODIFIED Y BUS MATRIX METHOD
192) OPTIMAL PLACEMENT OF CAPACITOR BANKS IN RADIAL DISTRIBUTION NETOWRKS USING MICROGENETIC ALGORITHM AND FUZZY LOGIC
193) LOAD FLOW STUDY OF A UPFC EMBEDDED SYSTEM
194) TUNING OF PID CONTROLLERS IN AUTOMATIC GENERATION CONTROL
195) Load flow analysis using artificial intelligence
196) Regression SVM based system identification
197) Power quality event detection using artificial intelligence tools
198) Finger print classification using Artificial intelligence
