PLANER MILLING MACHINE ACCOMMODATED WITH DRILL HEAD
#1

[attachment=1170]
Mini project report on
PLANER MILLING MACHINE ACCOMMODATED WITH DRILL HEAD

INTRODUCTION:
What is Planer-milling machine?

Planers and shapers are now obsolescent, because milling machines have eclipsed them as the machine tools of choice for doing work, as the rate of metal removal is quantitative.
planer-milling machines come in two kinds: double-housing and open-side. The double-housing variety has vertical supports on both sides of its long bed; the open-side variety has a vertical support on only one side, allowing the work piece to extend beyond the bed.


MACHINE CONFIGURATIONSurface area of work table:
4 metres * 6 metres.
Maximum distance between the work table & the arm:
2 metres.
Maximum weight of work that the bed can withstand:
45 tones.

SETUP OF WORK PIECE ON THE MACHINE
Lift the work piece, using hoist, to position on machine bed.
Secure work piece in holding fixture, using wrenches, and verify position, using gauges, calipers, or square.
Select cutting tool and mount it in spindle, using hand tools. Adjust controls to set feed rate, speed of cutting tool, and depth of cut.
start machine, and engage automatic feed. Observe operation, stop machine to change cutting tool, and adjust controls.
Reply
#2
PHP Code:
[quote='computer science technology' pid='8118' dateline='1263748708']

Mini project report on
PLANER MILLING MACHINE ACCOMMODATED WITH DRILL HEAD

INTRODUCTION
:
What is Planer-milling machine?
 
   
    Planers 
and shapers are now obsolescentbecause milling machines have eclipsed them as the machine tools of choice for doing work, as the rate of metal removal is quantitative
planer-milling machines come in two kindsdouble-housing and open-sideThe double-housing variety has vertical supports on both sides of its long bedthe open-side variety has a vertical support on only one sideallowing the work piece to extend beyond the bed


MACHINE CONFIGURATIONSurface area of work table:
 
         4 metres 6 metres.
Maximum distance between the work table the arm:
 
         2 metres.
Maximum weight of work that the bed can withstand:
 
         45 tones

SETUP OF WORK PIECE ON THE MACHINE
 Lift the work piece
using hoistto position on machine bed.
Secure work piece in holding fixtureusing wrenches, and verify positionusing gaugescalipers, or square.
Select cutting tool and mount it in spindleusing hand toolsAdjust controls to set feed ratespeed of cutting tool, and depth of cut.
start machine, and engage automatic feedObserve operationstop machine to change cutting tool, and adjust controls.
[/
quote
Reply
#3
In previous days, planers and shapers were popularly used but have become obsolete now. The milling machines have replaced them like the best machine tools since the speed of elimination of the metal is of quantitative nature. This project "Planing milling machine with drill head" explains milling machines. These machines are of two types: double housing and open side.

In the double housing, the vertical supports are present on both sides of the long bed, while in the open-side arrangement, the vertical supports are only on one side, which allows the work piece to extend further. The use of mail machines increases the production rate. Since the flatbed and drilling machine is built into a unit, energy is saved and there is no transfer of tones between the machines.
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page
Popular Searches: drill hole indexing mechanism, pcb microvia drill, seminar topic on multiple material milling platform, cutting milling machine ppt, abrasive attachment to drill machine, seminar about drill machine, drill machine project,

[-]
Quick Reply
Message
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  Coconut Dehusking Machine seminar surveyer 2 7,453 17-05-2016, 03:48 PM
Last Post: dhanabhagya
  HEAD LIGHT TILTING WITH RESPECT TO STEERING WHEEL MECHANISM seminar presentation 7 10,039 30-09-2013, 10:54 AM
Last Post: computer topic
  WORKING MODEL OF 2D PENTOGRAPH MACHINE smart paper boy 2 4,156 26-04-2013, 02:52 PM
Last Post: computer topic
  Design And Fabrication Of Plastic Grinding Machine computer science topics 1 5,901 07-01-2013, 02:21 PM
Last Post: seminar details
  DESIGN AND FABRICATION OF PLASTIC COATING MACHINE projectsofme 1 4,084 07-01-2013, 02:21 PM
Last Post: seminar details
  AUTOMATION OF PNEUMATIC SHEET METAL BENDING MACHINE seminar presentation 3 9,147 14-12-2012, 02:47 PM
Last Post: seminar details
  NC CONTROLLING OF INDEXING HEAD MECHANISM smart paper boy 2 3,001 07-07-2011, 08:41 PM
Last Post: rajasekar.nkl3
  Computer-controlled testing machine project topics 0 2,495 26-04-2011, 03:06 PM
Last Post: project topics
  AUTOMATIC DRILLING MACHINE SYSTEM seminar class 0 4,738 28-03-2011, 04:40 PM
Last Post: seminar class
  NC, CNC, DNC Machine seminar class 0 6,317 23-03-2011, 12:11 PM
Last Post: seminar class

Forum Jump: