MEMBRANE BIOREACTOR - AN EXCELLENT OPTION FOR WASTEWATER TREATMENT
#1

The advent of membranes makes the wastewater treatment easier nowadays. Activated sludge process (ASP) , which is the oldest technique in wastewater treatment , is combined with highly efficient membrane filtration to start a sophisticated technique called Membrane Bioreactor (MBR).It is an efficient process for maintaining a long solids retention time(SRT) at a relatively short hydraulic retention time(HRT),which is needed for the treatment of waste water. MBR is favored to all other conventional techniques because the treated water is free from suspended solids and microorganisms, thus making it suitable for reuse. This unique application gives high degradation rates, extremely low sludge production and very compact design. This seminar includes the conventional activated sludge process, description of membrane bioreactor operation, various types of filtrations that are used in it, its design parameters and applications. It also gives a brief description of the cleaning of the membrane. The MBR technology has a number of advantages.The most important thing to be considered when employing an MBR is that it is not economical to run a membrane bioreactor at lowtreatment capacity and high treatment is much more complicated to stabilize.So,before,stabilizing an MBr,one should go for technical feasibility as well as economical feasibility.If these two are satisfactory,then Membrane Bioreactor (MBR) is the best option to treat municipal as well as industrial wastewater
Reply
#2


Membrane Bioreactor for Wastewater Treatment

Recent technical innovation and significant membrane cost reduction have pushed membrane bioreactors (MBRs) to become an established process option to treat wastewaters. The combination of membrane separation with a suspended growth bioreactor is now widely used for municipal and industrial waste treatment (Judd, 2006). When used with domestic wastewater, MBR processes could produce effluent of high quality enough to be discharged to coastal, surface or brackish waterways or to be reclaimed for urban irrigation. Other advantages of MBRs over conventional processes include small footprint, easy retrofit and upgrade of old wastewater treatment plants into MBRs. However, membrane fouling remains a major drawback, limiting the wider application of this process.

Fouling: Major Drawback

In recent reviews covering membrane applications to bioreactors, it has been shown that, as with other membrane separation processes, membrane fouling is the most serious problem affecting system performance (Le-Clech et al., 2006, Kim et al., 2001). Fouling leads to a significant increase in hydraulic resistance, manifested as permeate flux decline or transmembrane pressure (TMP) increase when the process is operated under constant-TMP or constant-flux conditions respectively. Frequent membrane cleaning and replacement is therefore required, increasing significantly the operating costs. Membrane fouling results from interaction between the membrane material and the components of the activated sludge liquor, which include biological flocs formed by a large range of living microorganisms along with soluble and colloidal compounds. The suspended biomass has no fixed composition and varies both with feed water composition and MBR operating conditions employed. Thus though many investigations of membrane fouling have been published, the diverse range of operating conditions and feedwater matrices employed, and the limited information reported in most studies on the suspended biomass composition, has made it difficult to establish any generic behaviour pertaining to membrane fouling in MBRs specifically.
Submerged MBR
With the membrane directed immersed into the bioreactor, submerged MBR systems are usually preferred to sidestream configuration (with the membrane situated into a pressurised external loop), especially for domestic wastewater treatment. The submerged configuration relies on coarse bubble aeration to produce in-tank recirculation and limit fouling. The energy demand of the submerged system can be up to 2 orders of magnitude lower than of the sidestream systems (Gander et al., 2000) and submerged systems operate at a lower flux, demanding more membrane area. In submerged configurations, aeration is considered as one of the major parameter on process performances both hydraulic and biological. Aeration maintains solids in suspension, scours the membrane surface and provides oxygen to the biomass, leading to a better biodegradability and synthesis of the cell (Dufresne et al., 1997). The air-induced cross flow can efficiently remove or at least reduce the fouling layer on the membrane surface. A recent review reports the latest findings on applications of aeration in submerged membrane configuration and described the enhancement of performances offered by gas bubbling (Cui et al., 2003). As an optimal air flowrate has been identified behind which further increases in aeration have no effect on fouling removal, the choice of aeration rate is a key parameter in MBR design. Fouling control Many other anti-fouling strategies have been proposed for MBR applications. They comprise, for example, intermittent permeation, where the filtration is stopped at regular time interval for a couple of minutes before being resumed. Particles deposited on the membrane surface tend to diffuse back to the reactor; this phenomena being increased by the continuous aeration applied during this resting period. Membrane backwashing is another common anti-fouling technique, where permeate water is pumped back to the membrane, and flow through the pores to the feed channel, dislodging internal and external foulants. A small amount of cleaning agents (like hypochloride) could be added to the permeate water to improve the removal efficiency. Because of the relative long time necessary to build up liquid back-pressure, the efficiency of the liquid backwash is somehow limited as the liquid prefers to go through open (not fouled) pores. This could be improved by using pressurized air in the permeate side of the membrane to build up and release a significant pressure within a very short period of time. Membrane modules therefore need to be in a pressurised vessel coupled to a vent system. Air usually does not go through the membrane. If it was, the air would dry the membrane and a rewet step would be necessary, by pressurizing the feed side of the membrane. MBR Suppliers The design of the reactor (including membrane, baffle and aerator locations) and the mode of operation of the membrane also appear as key parameters in the optimisation of the system. Several immersed MBR designs are currently proposed by the leading membrane suppliers such as Zenon (Canada), X-Flow (The Netherlands), USFilter (USA), Mitsubishi and Kubota (Japan). In each case, the process proposed is very specific. Not only the membrane material and configuration used are different, but the operating conditions, cleaning protocols and reactor designs also change from a company to another. For example, the 3
flat sheet membrane provided by Kubota does not allow backwash operation,
while hollow fibre membrane type from Zenon and Memcor (USFilter) have been
especially designed to hydraulically backwash the membrane on a given
frequency (around every 10 min).


References
Z.F. Cui, S. Chang, A.G. Fane, The use of gas bubbling to enhance membrane
process, J. Memb. Sci. 2211 (2003) 1-35.
R. Dufresne, R.E. Lebrun, H.C. Lavallee, Comparative study on fluxes and
performances during papermill wastewater treatment with membrane bioreactor,
Canadian J. Chem. Eng. 75 (1997) 95-103.
M. Gander, B. Jefferson, S. Judd, Aerobic MBRs for domestic wastewater
treatment: a review with cost considerations. Sep. Purif. Techn. 18 (2001) 119-
130.
S. Judd, The MBR book (2006) Principles and applications of membrane
bioreactors in water and wastewater treatment, Elsevier, Oxford.
J.S. Kim, C.H. Lee, I.S. Chang, Effect of pump shear on the performance of a
crossflow membrane bioreactor, Wat. Res. 35 (2001) 2137-2144.
P. Le-Clech, V. Chen, A.G. Fane, Fouling in membrane bioreactors used for
wastewater treatment – A review. J. Memb. Sci. 284 (2006) 17-53.
Reply
#3
Blush
its awesome report
Reply
#4
Brick 
gajbReferences
Z.F. Cui, S. Chang, A.G. Fane, The use of gas bubbling to enhance membrane
process, J. Memb. Sci. 2211 (2003) 1-35.
R. Dufresne, R.E. Lebrun, H.C. Lavallee, Comparative study on fluxes and
performances during papermill wastewater treatment with membrane bioreactor,
Canadian J. Chem. Eng. 75 (1997) 95-103.
M. Gander, B. Jefferson, S. Judd, Aerobic MBRs for domestic wastewater
treatment: a review with cost considerations. Sep. Purif. Techn. 18 (2001) 119-
130.
S. Judd, The MBR book (2006) Principles and applications of membrane
bioreactors in water and wastewater treatment, Elsevier, Oxford.
J.S. Kim, C.H. Lee, I.S. Chang, Effect of pump shear on the performance of a
crossflow membrane bioreactor, Wat. Res. 35 (2001) 2137-2144.
P. Le-Clech, V. Chen, A.G. Fane, Fouling in membrane bioreactors used for
wastewater treatment – A review. J. Memb. Sci. 284 (2006) 17-53.
Reply
#5


to get information about the topic"MEMBRANE BIOREACTOR - AN EXCELLENT OPTION FOR WASTEWATER TREATMENT"refer the page link bellow

http://studentbank.in/report-membrane-bi...0#pid58990
Reply
#6
Heart 
(31-01-2009, 12:18 AM)seminar projects crazy Wrote: The advent of membranes makes the wastewater treatment easier nowadays. Activated sludge process (ASP) , which is the oldest technique in wastewater treatment , is combined with highly efficient membrane filtration to start a sophisticated technique called Membrane Bioreactor (MBR).It is an efficient process for maintaining a long solids retention time(SRT) at a relatively short hydraulic retention time(HRT),which is needed for the treatment of waste water. MBR is favored to all other conventional techniques because the treated water is free from suspended solids and microorganisms, thus making it suitable for reuse. This unique application gives high degradation rates, extremely low sludge production and very compact design. This seminar includes the conventional activated sludge process, description of membrane bioreactor operation, various types of filtrations that are used in it, its design parameters and applications. It also gives a brief description of the cleaning of the membrane. The MBR technology has a number of advantages.The most important thing to be considered when employing an MBR is that it is not economical to run a membrane bioreactor at lowtreatment capacity and high treatment is much more complicated to stabilize.So,before,stabilizing an MBr,one should go for technical feasibility as well as economical feasibility.If these two are satisfactory,then Membrane Bioreactor (MBR) is the best option to treat municipal as well as industrial wastewater

Reply
#7

To get full information or details of MEMBRANE BIOREACTOR - AN EXCELLENT OPTION FOR WASTEWATER TREATMENT please have a look on the pages

http://studentbank.in/report-membrane-bi...0#pid58990

http://studentbank.in/report-membrane-bi...e=threaded

if you again feel trouble on MEMBRANE BIOREACTOR - AN EXCELLENT OPTION FOR WASTEWATER TREATMENT please reply in that page and ask specific fields
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page
Popular Searches: electrocoagulation methods for wastewater treatment ppt, foreign exchange funding option, pdf on electrochemical coagulation ecc technology for treatment of hospital wastewater, types of bioreactor, hydrodynamic cavitation wastewater treatment ppt, electrocoagulation wastewater treatment ppt, membrane processing technologies ppt,

[-]
Quick Reply
Message
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  MEMBRANE BIOREACTORS (MBR) seminar projects crazy 2 3,403 19-11-2011, 09:31 AM
Last Post: seminar addict
  INOVATIVE TECHNIQUES FOR INFLUENT AND EFFLUENT TREATMENT IN PAPER INDUSTRY seminar class 0 2,441 26-03-2011, 03:35 PM
Last Post: seminar class
  BIOREACTOR SYSTEMS seminar class 0 2,774 18-03-2011, 01:54 PM
Last Post: seminar class
  OZONE IN WATER TREATMENT seminar projects crazy 4 4,758 31-01-2011, 02:47 PM
Last Post: bhagyashri21
  Treatment of Dilute Metal Effluents in an Electrolytic Precipitator seminar surveyer 0 1,837 18-10-2010, 03:55 PM
Last Post: seminar surveyer
  ETP Effluent Treatment Plant project report helper 0 2,746 16-10-2010, 06:00 PM
Last Post: project report helper
  TREATMENT OF WASTES FROM TANNERIES IN INDIA presentation seminar presentation 1 4,588 01-08-2010, 04:14 PM
Last Post: bernnebez

Forum Jump: