this is ruby tripathi. i vl apload any new topic and my search related to any project. i will help students inn their work..

matlab simulation of manufacturing
of turbo generator by vpi process

matlab simulation of manufacturing of turbo generator by vpi process

This project gives detailed information about the hydro-generators, in our design and manufacturing process, testing of turbine generators we provide a detailed study on the turbo generators with respect to their production cycle and testing process. These turbogenerators nothing but alternators driven by turbines is the turbine acts as the primary engine else is similar to a conventional alternator.

while according to their origin, these works on the principle of electromagnetic induction principle, consists of a rotor and a stator, the stator consists of a stator housing for supporting the laminated core and the windings and the laminated stator core provided with ventilation in order to minimize losses of eddy currents its purpose is to support the stator windings are rotating rotor part consists of a slotted rotor shaft to accommodate the excitation windings (the windings of the rotor) is a single solid piece can withstand high mechanical loads and nonmagnetic rotor retaining ring overcome the centrifugal forces, as well as for cooling purposes we use the fan rotor assembly, production preparation lamination of the stator coils, excitation system, cooling methods, a variety of insulation systems must be clearly explained in the relevant sections.

Various process isolation schemes are tar and poor systems of resins each system has its advantages and disadvantages, here we introduce a new concept in turbogenerators insulation impregnation vacuum pressure causes the pressure for good penetration of the lacquer on the coils, there are various types as ventilation radial ventilation, axial system ventilation.

Multiple ventilation intake system for different rankings of turbogenerators. While coming testing alternator we perform two types of test testing process during manufacture and service tests after the generator assembly to study discharge phenomenon quadratic speed tests partial discharge are conducted on the stator bars, various types of process and performance tests.