Fluorescent Multi-layer Disc
#1

Introduction

Requirements for removable media storage devices (RMSDs) used with personal computers have changed significantly since the introduction of the floppy disk in 1971. At one time, desktop computers depended on floppy disks for all of their storage requirements. Even with the advent of multigigabyte hard drives, floppy disks and other RMSDs are still an integral part of most computer systems, providing.

? Transport between computers for data files and software
? Backup to preserve data from the hard dive
? A way to load the operating system software in the event of a hard failure.

Data storage devices currently come in a variety of different capacities, access time, data transfer rate and cost per Gigabyte. The best overall performance figures are currently achieved using hard disk drives (HDD), which can be integrated into RAID systems (reliable arrays of inexpensive drives) at costs of $10 per GByte (1999). Optical disc drives (ODD) and tapes can be configured in the form of jukeboxes and tape libraries, with cost of a few dollars per GByte for the removable media. However, the complex mechanical library mechanism serves to limit data access time to several seconds and affects the reliability adversely.

Most information is still stored in non-electronic form, with very slow access and excessive costs (e.g., text on paper, at a cost of $10 000 per GByte).Some RMSD options available today are approaching the performance, capacity, and cost of hard-disk drives. Considerations for selecting an RMSD include capacity, speed, convenience, durability, data availability, and backward-compatibility. Technology options used to read and write data include.

? Magnetic formats that use magnetic particles and magnetic fields.
? Optical formats that use laser light and optical sensors.
? Magneto-optical and magneto-optical hybrids that use a combination of magnetic and optical properties to increase storage capacity.

The introduction of the Fluorescent Multi-layer Disc (FMD) smashes the barriers of existing data storage formats. Depending on the application and the market requirements, the first generation of 120mm (CD Sized) FMD ROM discs will hold 20 - 100 GigaBytes of pre -recorded data on 12 - 30 data layers with a total thickness of under 2mm.In comparison, a standard DVD disc holds just 4.7 gigabytes. With C3D's (Constellation 3D) proprietary parallel reading and writing technology, data transfer speeds can exceed 1 gigabit per second, again depending on the application and market need.

WHY FMD?

Increased Disc Capacity
DVD data density (4.7 GB) on each layer of data carriers up to 100 layers. Initially, the FMD disc will hold anywhere from 25 - 140 GB of data depending on market need. Eventually a terabyte of data on a single disc will be achievable.

Quick Parallel Access and Retrieval of Information
Reading from several layers at a ime and multiple tracks at a time nearly impossible using the reflective technology of a CD/DVD - is easily achieved in FMD. This will allow for retrieval speeds of up to 1 gigabyte per second.

Media Tolerances
By using incoherent light to read data the FMD/FMC media will have far fewer restrictions in temperature range, vibration and air- cleanness during manufacturing. And will provide a considerably more robust data carrier than existing CD and DVDs.
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page
Popular Searches: transport layer security email, ozen layer inmarathi, ideas for a microbiology project involoving fluorescent, fluorescent disc ppt, california disc golf, implementation of datalink layer in c, prevention of ozon layer in marathi,

[-]
Quick Reply
Message
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  Layer Reassignment for Antenna Effect Minimization in 3-Layer Channel Routing computer girl 0 1,350 11-06-2012, 01:27 PM
Last Post: computer girl
  MULTI –POINT FUEL INJECTION seminar surveyer 1 3,151 11-05-2011, 12:05 PM
Last Post: seminar class
  Field Orientated Control of a Multi-Level PWM Inverter Fed Induction Motor seminar class 0 1,894 17-02-2011, 02:21 PM
Last Post: seminar class
  A Multi-Agent Solution to Distribution Systems Restoration science projects buddy 0 1,206 15-12-2010, 11:13 PM
Last Post: science projects buddy
  Multi-Input Inverter for Grid-Connected Hybrid PV/Wind Power System project report helper 0 2,415 13-10-2010, 10:21 AM
Last Post: project report helper
  Multi-Carrier Transmission over Mobile Radio Channels seminar surveyer 0 949 08-10-2010, 02:40 PM
Last Post: seminar surveyer

Forum Jump: