21-07-2011, 05:18 PM
1. Solar data logger into MMC/SD Memory Card.
2. Radio Frequency based remote controlled robot with wireless video camera mounted on it.
3. PIR based energy conservation system for corporate Computers and lighting system.
4. Accelerometer (Gyroscope) Controlled Robot. Accelerometer is mems based 3-axis sensor that can sense the tilt in of the 3-diamentions. The robot moment is controlled based on the tilt angle of the robot. No need to press any buttons for robot control.
5. Liquid dispensing system with adjustable quantity for industrial use.
6. Using this project the digital camera can be controlled remotely using RF Transmitter and Receiver. The controls include taking picture snaps, switching on the flash light, changing camera direction using stepper motor etc.
7. Automatic Temperature Measurement and Control (Microcontroller Board + Sensors + LCD)
8. Android Smart Phone operated Robot with bluetooth control.
9. uC based Multiple Device Control based on Change in Input Frequency.
10. Microcontroller based Generator/Alternator Control and Monitoring System.
11. Innovative keyboard construction with only one input pin.
12. Wireless Stepper Motor Controller (Radio Rx/Tx + Stepper Motor + Microcontroller)
13. Wireless Heartbeat Monitoring and Alert system.
14. Virtual distance measuring tape with Graphical LCD. Very useful for roads and buildings department. One man operable and works on anywhere on earth.
15. Travel assistant for blind with dynamic user input for location based alerts.
16. Temperature Measurement over GSM Mobile. The purpose of this project is to measure the temperature using LM35 sensor. This temperature is processed by microcontroller and sent to the user over GSM mobile.
17. uC based Heartbeat Monitoring over GSM Mobile. The design was carried out through the use of two infrared sensors. The sensors check blood density on the patient's fingertips in order to measure heart rate. The raw data from the sensors is processed by microcontroller and the processed data is sent to user over GSM modem/mobile
18. Touchscreen based Ordering System for Restaurants.
19. Interfacing. Microcontroller to Cellphone graphical display.
20. uC based MMC/SD Memory Card Interfacing. (Data Logger)
21. DC Voltage and Current Meter With LCD Display
22. Digital Vehicle Dash Board
23. Microcontroller based Hardware (USB or Serial) key implementation for any software based applications.
24. Microcontroller Based Temperature Monitoring & Control
25. uC based Solar Tracker with Stepper Motor Control (Microcontroller Board + Stepper Motor + Sensors)
26. Graphical LCD and Memory stick (MMC/SD card) based textbook reading system.
27. uC based Real Time Clock and Multiple Device control based on Time and Date.
28. Evaluation of the tongue drives system by individuals with high-level spinal cord injury (IEEE 2009).
29. Microcontroller based refrigeration control system.
30. PC Controlled Digital Devices
31. RFID and GSM based intelligent letterbox (mailbox).
32. Microcontroller based GPS Navigator with Google Earth Interface and MMC/SD 1GB Card Data Logging
33. Standalone GPS Coordinates(Latitude, Longitude...) Locater. (GPS+Microcontroller+LCD)The purpose this project is to get the Latitude and Longitude from the satellites and display them on LCD display.
34. GPS Compass
35. GPS based travel assistant for blind people.
36. GPS based navigator with location display on Graphical LCD. This provides user to have the location information displayed in any language.
37. Implementation of location based advertisement system using GPS and Graphical LCD.
38. GSM based digital Notice board with display on Monitor or LCD display.
39. AC/DC/Stepper Motor Closed Loop Speed Control
40. Touchscreen based temperature monitoring and control system with graphical LCD.
41. Zigbee and Touchscreen Controlled PC.
42. GSM Based Irrigation System
43. Electrical Data (voltage, current, frequency etc...) Logger (SCADA)
44. Wireless PC based multi-patient health monitoring system for Corporate Hospitals.
45. Wireless Energy Meter monitoring system with automatic tariff calculation.
46. Microcontroller based Temperature Measurement and Relay Control with PC Interface
47. Automatic Intelligent Plant Watering System (Microcontroller + Rain Sensor)
48. Microcontroller driven GPS Clock (GPS+Microcontroller+LCD) this updates time (GMT) from satellites and displays on LCD.
49. DS1307 and Microcontroller based TV remote controlled Digital Clock.
50. Hazardous chemical valve control system with stepper motor and line of site remote control.
51. Touch screen controlled motor speed and direction controlling system.
52. Function Generator Using Microcontroller
53. Wireless touchscreen based multi-patient health monitoring system for corporate hospitals.
54. Advanced vehicle tracking and automatic crash notification using GPS and GSM technology with Location Name as SMS.
55. Touchscreen operated liquid dispensing system.
56. uC based Closed Loop Temperature Control
57. Wireless SCADA
58. Intelligent mobile phone with GPS enabled features.
59. uC to PC Serial Interface With Device Control + PC Software (.NET or VC++).
60. Microcontroller based Substation Monitoring and control System
61. Multi Channle Voltage Measurement with PC Display
62. GPS+GSM based Realtime Bus/Train Location Finder and display on Earth's Map
63. GSM Based Automatic Energy Meter Reading System
64. Contact less Motor speed monitoring on Graphical display with high and low speed alerts.
65. DC Voltage and Current Meter With PC Display.
66. GSM/Mobile/Cell Phone Based Device Monitoring and Control Ststem. The purpose of this project is to Monitor and Control any Digital or Analog devices from your Cell Phone. This Project can be used to control up to 16 electrical devices. With this circuit you can switch-ON , OFF or Restart some Linux servers, ADSL modems, Printers, Door with electric lock, Irrigation Pump, Garage door, House lights, Water pumps, electric sunshade, Block the engine of your car or your motorcycle, at the steal case and much more. The purpose of this circuit is to make the human life better and easier.(GSM Modem/Mobile/Cell Phone)+ Microcontroller)
67. Wireless Speedo meter for boat/ship with speed and location limit alerts.
68. GSM based SCADA (Supervisory Control and Data Acquisition) implementation.
69. Micro Electro Mechanical Sensor (MEMS) Accelerometer/Gyroscope based self-balancing robot.
70. Automatic Rotor Resistance Controller using Microcontroller
71. GPS based border alert system for fishermen.
72. Mobile technology (GSM) based remote monitoring and control of digital Energy meter. Useful for Electricity Department personal for remote meter reading. Also useful to disconnect the power supply to consumer in case of non-payment of electric bill. This is also used to exchange messages like power cut timings with the consumers.
73. PC Controlled Analog Devices
74. Automatic Room Illumination Control (Microcontroller Board + Sensors)
75. Military persons training system that monitors the speed at which they move and records the calculated travelled distance with the time.
76. DTMF mobile phone controlled dam water gates controlling system with high-level protection.
77. Microcontroller based virtual boundary/fencing for Wild Animals.
78. Touch Screen GLCD based Digital Devices Control System
79. Standalone Heartbeat Data Logger (MCU+SD/MMC 1GB Card+Sensors) The purpose of this project is to log the heartbeat data into the MMC memory stick. The data for the duration upto one Month can be logged continuously
80. GPS Navigator/Logger (Microcontroller Board + Memory Card +PC Software)
81. uC based Real Time Clock with (2x16) LCD Display
82. Password protected IR based Device Control.
83. GSM+GPS based school kids tracking system.
84. uC based Wireless Temperature Measurement
85. Multi Channle Voltage Measurement with LCD Display
86. Radio Frequency wireless remote controlled digital camera with high power LED based focusing light. The camera direction can be controlled remotely and the video images can be seen live on TV.
87. GSM Based Home Security System. Get intrusion alerts like door/windows open alerts onto your Cell Phone. (GSM+Microcontroller)
88. Mobile phone controlled Street Light monitoring and control system.
89. GPS and Graphical display based tourist-guiding system with Touchscreen keyboard input for dynamic location recording. This can be used anywhere in the world including Sea and Forest locations.
90. Timer based automatic power cut-off for industrial sealing/packaging machines.
91. Google Android operated Smart Home.
92. Infrared (IR) remote controlled Muscle Stimulator with duration and intensity control.
93. Microcontroller and Triac based realtime temperature monitoring and control
94. Wearable technology for wireless gadgets control.
95. SCADA system design and construction for real-time electrical parameter monitoring and control.
96. Multi Channel Frequency Measurement with PC Display
97. Real-time SCADA (Microcontroller Board + Sensors + PC Software)
98. Touch Screen based digital devices control system. This project is to build a Graphical LCD Touch Screen interface for switching electrical devices. The controlled devices can be of high voltage or low voltage.
99. Usb 2.0 Hardware implimentation using PIC 18F2550/18F4550 16-bit advanced microcontroller. (With PC side VC++ application).
100. GPS based vehicle travel location-logging system. This System stores the traveler's geographical location and speed at an interval of one second and is stored in to 1GB MMC/SD memory card.
101. Timer based Electrical Oven temperature monitoring and control for Metal Industries.
102. Temperature Analyzers with computerized graphical image.
103. Touchscreen based Wireless Language Translator in Airlines using Zigbee.
104. Microcontroller based Wireless matchbox with digital lantern.
105. Microcontroller based Automatic Railway Gate Control System.
106. Touch screen controlled lamp dimmer for next generation apartments.
107. Microcontroller based digital clock with Graphical LCD and Sanskrit font (or Any regional font) Numbers.
108. Password enabled pre-paid liquid/milk dispensing system.
109. Data logger for energy meter with time and KWH readings. Very useful for historical data logging and analysis.
110. Microcontroller based dual Lithium-ion battery charger with automated charge and discharge cycles.
111. Smartphone blutooth controlled Robot.
112. Using Magneto-Inductive Sensors to Detect Tongue Position in a Wireless Assistive Technology for People with Severe Disabilities (IEEE 2007).
113. RF transceiver (Zig bee/X-Bee) based energy meter monitoring system. (Energy Meter reading on PC over wireless comm.)
114. PWM DC Motor Speed Controller (Microcontroller Board + Sensors + LCD + DC Motor)
115. Automatic Intelligent Plant Watering System.
116. GPS based office cab monitoring system very useful for the safety of female employees. This system records the travel path and location with timings. Also records the destination of each employee home.
117. GPS and GSM based real-time vehicle tracking on GoogleEarth (with two GSM Modems)
118. Touchscreen based wireless communication assistant for dumb/illiterates in Airlines.
