DRAUGHTSMAN GR II - SURVEY AND LAND RECORDS.pdf (Size: 1.44 MB / Downloads: 1)

1.One hectare equals : (A)100 m2
(C )10,000 m2
(B)1000 m2
(D)100000 m2

2.Chain surveying is most suitable for:
(A) forest area(B) hill area
(C ) undulating area(D) flat surface

3.If a measuring tape is too long as compared to standard length, the error will be :
(A)Accidental error(B)Instrumental error
(C )Personal errorPersonal error(D)Natural errorNatural error

4.The boundary of water of a still lake represents :
(A)Level surface(B)Horizontal surfaceHorizontal surface
(C )Contour lineContour line(D)Concave line

5.Which method in plane table surveying for locating previous station point?
(A)Intersection(B)RadiationRadiation
(C )ResectionResection(D)TraversingTraversing

6.Multiplying constant for the tacheometer is generally:
(A) 50(B) 100
(C ) 150(D) 200

7.The ratio of the length of the object in the drawing to the actual length of the object is called:
(A)full scale(B)least countleast count
(C )diagonal scale(D)representative fractionrepresentative fraction

8.A 500 sq.m area is represented by 600 sq.mm in aa drawing. The scale of the drawing is :
(A) 1 mm = 100 m(B)1 mm = 5 m
(C ) 1 mm = 1 m(D)1 mm = 10 m?

9.Process of turning the telescope about the vertical axisin a horizontal plane is called :
(A) reversing(B)transitingtransiting
(C ) pluging(D)swinging

10.The instrument used for measuring area on a contour map is :
(A) clinometer(B)planimeter
(C ) pantograph(D)graphometer

11.In levelling a station point where :
(A) Levelling instrument is set up(B)Bench Mark is marked
(C ) Levelling staff is placedCD)All of these

12.The last reading of levelling is always a :
(A) fore sight(B)back sightback sight
(C ) intermediate sight(D)change pointchange point

13.Levelling across a river is done by :
(A) fly levelling(B)cross levellingcross levelling
(C ) trigonometrical levelling(D)reciprocal levelreciprocal levelling

14.The line of collimation should be parallel to ;
(A) vertical axis(B)bubble axisbubble axis
(C ) plumb axis(D)none of these

15.The height of instrument method is:
(A) less tedious(B)more rapidmore rapid
(C ) less calculation(D)all of theseall of these

16.While traversing anticlockwise a closed traverse of ‘N' sides, theoretical sum of included
angles should be:
(A) (2N-4)x90(B)(2N+4)(2N +’4) x 90
(C ) (2JV ± 4) x 90°(D)360°

17.Angle of dip at pole is :
(A) 0°(B) 30°
(C ) 45°(D) 90°

18.An offset more than 15 m in length is called :
(A) oblique offset(B) short offset
(C ) long offset(D) right angled offset

19.To calculate the area, the expression A s ~ [(F+ L) + 20 + 4E] where ‘F is first ordinate, ‘L is the last ordinate, 'O’ is odd of ordinates 'E' is even ordinates and 'h' is the common distance between the ordinates:
(A) Average ordinate rule(B) Mid ordinate rule
(C ) Trapezoidal rule(D) Simpson’s rule

20.The correction for sag is always :
(A) positive(B) negative
(C ) zero(D) none of these

21.Metallic tapes are made of:
(A) stainless steel(B) nickel
(C ) steel and nickel(D) yam and wire

22.Example for a deep foundation:
(A) Grillage foundation(B) Well foundation
(C ) Mat foundation(D) Step foundation

23.Mechanical advantage equal to :
(A) w/p.p (B) P/W
(C ) PxW(D)* P-W

24.The resultant of two forces ‘p' and 'Q’ acting at angle 'ǿ is equal to :
(A) 4p2 +Q2 +2PQ*inO(B) JP*-Q1+2PQsin0
(C ) -JP1 +Q2 + 2I‘Q cobO(D) -Q1 + 2PQ cos 0

25. The ratio of stress to strain is:
(A) Elasticity (C ) Bulk modulus

26.In conics the fixed point is called 
(A) Vertex (C ) Helix
(B) Apex (D) Focus

27.A regular solid having six square faces is :
(A)Hexagen(B)Octahedron
(C )Cube(D)Tetra hedran

28.The horizontal angle between the true meridian and line is called :
(A)magnetic bearing(B)azimuth
(C )arbitrary bearing(D)reduced bearing

29.The observed fore bearing of a line is 142°18* then the back bearing is : 
(A) 322° 18‘(B) 37°42’
(C ) 322°42.(D) 232°18'

30.The true bearing of a line is 127° and declination is 2°W. The magnetic bearing equals 
(A) 125°(B) 131°
(C ) 129°*(D) 135°

31.The sum of the interior angles of a regular pentagen is:
(A) 360°(B) ' 540°
(C )720°(D)630° 

32.The bearing of a line AB is 152°20’ and the angle BAC is 124°38'. The bearing of AC is
(A)96°58(B)96° 18’
(C )276°58’(D)127°18’

33. The inclination of the compass needle with the horizontal is known as:
(A) Declination (C ) True bearing
(B) Dip
(D) Magnetic Declination

34.The angle between the reflecting surfaces of a prism square is :
(A)45°(B)60°
(C )75°(D)90°

35.The angle of depression in theodolite traverse is :
(A)positive angle(B)negativeangle
(C ) both positive and negative angle (D) above horizontal angle

36.The bench mark at A is ‘200' m and staff reading at A is '3.5' m and the staff reading at B is ‘2' m. The reduced level at B is:
(A)203.5m(B)202.0 m
(C )201.5m(D)202.5 m

37. Which method is particularly suitable when a contoured map of a hill required?
(A) Radial method(B)Square methodSquare method
(C ) Cross-section method(D)Tachemetric method

38.The most common Coagulant is:
(A) Alum(B)ChlorineChlorine
(C ) Bleaching power(D)All of theseAll of these

39.The whole circle bearing of a line is 165°. Its reduced bearing is :
(A) N 75° E(B)N 75° W
(C ) S 15° ECD)S 15° W

40.To locate an electric post near suitable:the plane table station which of the following method is
(A) Intersection(B)RadiationRadiation
(C ) Resection(D)TraverseTraverse

41.If distance between two points A and B is 1 km, then refraction will be:combined correction for curvature and
(A) 0.0673 D2 m(B)1.0673 D2 m
(C ) 0.673 D2 m(D)1.673 D2 m

42. The process of establishing intermediate points between two end points which are not intervisible, with the help of a theodolite is called:
(A) Lining-in(B)RangingRanging
(C ) Balancing-in(D)Random line Random line

43.The observation is taken on a change point is:
(A) fore sight(B)back sightback sight
(C ) intermediate sight(D)both fore sight back sightboth fore sight and back sight

44.The isometric projection of a square is :
(A) Rectangle(B)RhombusRhombus
(C ) Parallelogram(D)TrapezoidTrapezoid

45.In a simply supported beam the point where the maximum bending moment occures is at
(A) support point(B)mid pointmid point
(C ) the point where SF is zero(D)end pointend point

46.Which of the following is used for checking verticality of masonry wall?
(A) spirit level(B)water levelwater level
(C ) trowel(D)plumb bobplumb bob

47.Departure co-ordinate related to:
(A) North and South(B)East and westEast and West
(C ) South and West(D)South and EastSouth and East

48.Bureau of Indian standards has recommended the useof folding staff as:
(A) 2 m(B)3 m
(C ) 4 m(D)4.5m4.5 m

49.The observation with level is:
(A) Horizontal linear measurement(B)Vertical linear measurementVertical Unear measurement
(C ) Angular measurement(D)Horizontal angular measurementHorizontal angular measurement

50. The box of the compass is made of:
(A) Aluminium(B) Iron
(C ) Copper(D) Brass

51.A fixed point of known elevation is :
(A) Bench Mark(B) Station point
(C ) Change point(D) Intermediate point

52.Ring contours of higher values interval represents inside :
(A) Ridge(B) Pond
(C ) Hill(D) Valley

53.The closing error of theodolite traverse where ‘L’ is the latitude and 'D’ is the departure :
CA) Vltf-I D*(B) Vltf + ED2
(C ) M K IL(D) ¥

54.The horizontal angle between true meridian and a survey line is :
(A) Dip(B) Magnetic Declination
(C ) Magnetic bearing(D) Azimuth

55.The method used for calculating the earth work with more accuracy is :
(A) Trapezoidal Rule(B) Mid-ordinate rule
(C ) Prismoidal rule(D) Average ordinate rule

56.The length of long chord is :
(A) 2R cosθ/2  /2(B) 2R sin θ/2
(C ) R cos θ/2(D) R sin θ/2

57.An instrument which is used for distance accurately is:measuring horizontal angle, vertical angle and direct
(A) Tacheometric survey(B) Theodolite survey
(C ) Box-sextant(D) Total station

58.The value of deflection angle is: (A) 0° to 90°
(C ) 0° to 270°
(B)0° to 180°
(D) 0° to 360°

59.In telescope the ratio of the focal length of the object to that of an eye-piece is known as :
(A)Magnification(B)Sensitivity
(C )Definition(D)Brightness

60.For accurate measurement of distance which tape is better?
(A)Metallic tape(B)PVC coated tape
(C )Steel tape(D)Invar tape

61.The number of links in a 30 m metric chain is :
(A)100 links(B)150 links
(C )180 links(D)200 links

62.The process of turning the telescope about the vertical axis in horizontal plane is called :
(A)Transiting(B)Reversing
(C )Plugging(D)Swinging

63.During chaining a straight line, the leader of the party has 4 arrows in his hand while the follower has 6 arrows in his hand from the starting point is :
(A)4 chains(B)6 chains6 chains
(C )120 metro(D)180 metre

64. The permissible error in compass survey is :
(A)15 minutes(B)15 seconds15 seconds
(C )30 seconds30 secondsCD)1 degree

65.In first angle projection the object is place :
(A)Above HP and behind VP(B)Above HP and infront of VPAbove HP and infront of VP
(C )Below HP and behind VP(D)Below HP and infront of VPBelow HP and infront of VP

66.In Engineering drawing chain lines are used for :
(A)Visible out lines(B)Dimension linesDimension lines
(C )Hidden linesHidden lines(D)Centre linesCentre lines

67.A well conditioned triangle has angles not less than and not more than respectively :
(A)10° and 90°(B)20° and 120°
(C )30° and 120°(D)90° and 120°

68.A scale representing either three units or only one unit and its fractions upto second place of decimal points is:
(A)Diagonal scale(B)Plane scale
(C )Vernier scale(D)Comparative scale

69.Important points selected at the ends of the chain lines to command the boundaries of the survey are called:
(A) Tie stations(B)Subsidiary stationsSubsidiary stations
(C ) Main stations(D)Check stationsCheck stations

70.The error due to bad ranging is :
(A) Compensating error(B)Cumulative positive errorCumulative positive error
(C ) Cumulative negative error(D)Both (B) and (C )

71.The reduced bearing of a line whose whole circle bearing is 40°:
(A) S 40° E(B)S 50° E
(C ) N 40° E(D)N 40° W

72.Fore bearing of a line is S 60° W. The back bearing is :
(A) N 60° E(B)N 30° E
(C ) S 60° E(D)S 30° W

73.Geodetic survey is different from plane surveying because of:
(A) Very large area is covered(B)Undulations of the topographyUndulations of the topography
(C ) Curvature of the earth is considered(D)Lage difference of elevationsLarge difference of elevations

74.The type of theodolite classified as :
(A) Diameter of upper plate(B)Diameter of lower plateDiameter of lower plate
(C ) Diameter of vertical plate(D)Diameter of telescopeDiameter of telescope

75.The traverse slope provided on the surface of theroadto remove the rain water :
(A) Crown(B)GradientGradient
(C ) Super elevation(D)CamberCamber

76. Volume of a solid sphere is :
(A)3л(B)4л r34 л rs
(C )4/3л r34/3лrr5(D)3/4 xr*

77. The actual size of standard brick is :
(A)20 x 10 x 10cm(B)19x9x9xcm19 x 9 x 9 cm
(C )20x20x10m20 x 20 x 10 cm(D)19x19x9cm19 x 19 x 9 cm

78. Full form of “CAD":
(A)Computer Aided Drafting(B)Computer Aided DemonstrationComputer Aided Demonstration
(C )Computer Aided DimensioningComputer Aided Designing(D)Computer Aided Dimensioning

79.A command which is used to pick points like end point, mid-point, tangent etc. of entities very precisely which geometrical accuracy :
(A)GRID(B)ZOOM
(C )DIM(D)OSNAP

80.The Bench Marks established by the survey of India Department:
(A) Permanent Bench Marks. (B) GTS Bench Marks
(C ) Arbitrary Bench Marks(D) Temporary Bench Marks

81.The pass located at the Southern end of the Nilgiri Hills in South India is called :
(A)Palghat gap(B)Bhorghat pass
(C )Thalgat pass(D)Bolan pass

82.The Gulf of mannar is situated along the coast of which state in India?
(A)Karnataka(B)Kerala
(C )Andhra Pradesh(D)Tamil Nadu

83.Which of the following rivers originate near Mahabaleshwar?
(A) Godavari(B) Krishna
(C ) Kaveri(D) Tapti

84.How many National Waterways are there in India?
(A) 3(B) 6
(C ) 7(D) 9

85. Which river is referred as Kalindhi in Puranas?
(A) Ganga(B)YamunaYamuna
(C ) Saraswathi(D)BrahmaputhraBrahmaputra

86.Bhagat Singh was sentenced to death inwhich case?
(A) Kakori case(B)Chauri-Chaura case
(C ) Assembly bomb case(D)Lahore conspiracy case

87.Who was the governor general of India when the I war of Indian Independence broke 1857?
(A) Lord Canning '(B)Lord Dalhousie
(C ) Lord Ripon(D)Lord Dufferin

88.Who was the President of the Indian National Congress in the Gaya Session of 1922?
(A) Motilal Nehru(B)C.R. Das
(C ) Sardar Patel(D)Bal Gangadhar Tilak

89.The founder of Satya Shodhak Samaj:
(A) Dr. Atmaram Pandurang(B)Gopal Hari Deshmukh
(C ) MG. Ranade(D)JyotiRao Phule

90.Inclusion of the word Fraternity in the preamble of Indian Constitution is proposed by?
(A) Jawaharlal Nehru(B)Dr. B.R. Ambedkar
(C ) Rajendra Prasad(D)J.B. Kripalani

91.The founder of Atma Vidya Sangham?
(A) Vagbhatananda Gurudeva(B)Vaikunda Swami
(C ) Chattampi Swami(D)Sree Narayana Guru

92.Who was the editor of Mitavadi?
(A) K. Ayyappan(B)C. Krishnan
(C ) Rama Krishna Pillai(D)K. Kelappan

93. Who is known as the father of Kerala Renaissance?
(A) Ayyankali
(C ) Sree Narayana Guru
(B) Dr. Palpu
(D) A.K. Gopalan

94.When was the historic Temple Entry Proclamation made?
(A)April 12, 1936(B)March 12, 1936
(C )June 12, 1936(D)November 12, 1936

95.Who among the following is the leader of Malayalee Memorial?
(A)C. Kesavan(B)Dr. Palpu
(C )Barister G.P. 67890- (D)Kumaranasan

96. ‘Operation protective Edge' is the name of which country's controversial military action launched on its neighbour?
(B) Syria
(A) Israel (C ) Jordan
(D) Iran

97.Which day is observed as World Population Day?
(A)June 11(B)July 11
(C )March 11(D)April 11

98.Who received the Golden Ball award for the best player of FIFA World Cup 2014?
(A)Lionel Messi(B)Karim Bensema
(C )Christiano Ronaldo(D)Angel D'Maria

99. With which game is Davis cup associated? (A) Football (C ) Hockey
(B) Cricket
(D) Lawn Tennis

100. Who is the present united nations deputy secretary General?
(A) Ban-Ki-Moon(B) Jose Graziano
(C ) Joan Closi Mathew(D) Jan Eliasson