design and fabrication of pneumatic riveting machine
#1

Hiii am Dnyaneshwaran and would like to get detail on design and fabrication of pneumatic riveting machine report
Reply
#2

Today riveting is done by using hammer, punching tool and lathe to place the rivets in the brake shoe. We change this method using pneumatic pressure consist of pneumatic cylinder with unidirectional valve and pedal system. A fixed table provided to the brake shoe. Reduces pillow and rivet waste. Also rivets can be placed accurately without any damage. The maximum number of service stations that have a compressor, so this project can be useful for all mechanics and the time of riveting will be reduced when compared with manual riveting. The cost of pneumatic riveting machine is low and is more efficient for the modern world.


A press or machine press is a tool used to work the metal (SOAP) by changing its shape and internal structure. A forging press reforms the workpiece into a three-dimensional object, not only by changing its visible shape but also the internal structure of the material. A stronger part results from this process than if the object was machined. A drill press is a type of press machine used to cut holes in the material. It can be small and hand driven and maintain a simple or very large CNC-operated die set with a multi-station turret and maintain a much larger and more complex set of dies. Most punching machines are large machines with a 'C' type frame or a 'portal' type frame. Type C has the hydraulic plunger at the top front, while the portal frame is very similar to a full circle with the plunger centered within the frame to stop the deflection or distortion of the frame. U-type presses have a bed plate which is used to lock the lower bearing of the die. T-bolts are used to lock the die and therefore this plate contains T-grooves into which the T-bolts are inserted. These slots are placed diagonally and with a horizontal groove on the longest side of the plate . These grooves extend to a central hole made in the plate, the hole being large enough to accommodate another socket with a hole, the hole being used to drop the perforated part in the lower part of the press. The upper part of the tool is supported against a vertical sliding piston with a clamping system which only admits a particular diameter of a threaded cylindrical member referred to as a "shank" of the tool. The lower portion of the tool is locked to the lower bed plate and the upper portion of the tool is locked to the slide piston.
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page
Popular Searches: design and fabrication pneumatic forging machine, pneumatic riveting machice ppt, pneumatic riveting machine file type pdf, application of pneumatic punching and riveting, mechanical engineering riveting machine project, design and fabrication of pneumatic forging machine project full report pdf download, hydraulic riveting machine abstract,

[-]
Quick Reply
Message
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  industrial self supporting chimney design calculation 0 8,258 11-02-2021, 05:11 PM
Last Post:
  well-spring some homemade barbecue backchat and moistureless rubs and the actuality 0 1,025 10-09-2019, 05:48 PM
Last Post:
  agent some homemade barbecue cheek and prosaic rubs and suit 0 942 10-09-2019, 07:04 AM
Last Post:
  pass some homemade barbecue coolness and arid rubs and module 0 898 09-09-2019, 06:35 PM
Last Post:
  Multi purpose machine project report 0 2,103 20-02-2019, 10:23 AM
Last Post:
  AUTOMATIC TELLER MACHINE 0 800 05-02-2019, 03:14 PM
Last Post:
  computer aided design vijayaraghavan book free download 2 10,004 27-11-2018, 04:49 PM
Last Post:
  vlsi design by kvkk prasad pdf 0 857 24-10-2018, 05:31 AM
Last Post: Guest
Information vlsi design by kvkk prasad pdf 0 870 23-10-2018, 10:27 PM
Last Post: Guest
  go kart design report in ieee format 0 5,889 06-10-2018, 04:21 PM
Last Post: Guest

Forum Jump: