to get report and design details for each automobile engineering project topic please browse through this page http://studentbank.in/topic-mechanical-e...ject-ideas

1. DESIGN AND FABRICATION OF PROPELLER SHAFT AND TIE ROD BEND TESTING AND BEND REMOVING MACHINE

2. ASSESSMENT OF POLLUTION AND ENERGY LOSSES CONSEQUENTIAL TO UNORGANISED MANAGEMENT OF B T S IN SHIVAJI NAGAR BUS TERMINAL

3. APPLICATION OF L P G FOR MOPEDS

4. IGNITION CONTROL TO IMPROVE THE COMBUSTION EFFICIENCY OF I.C ENGINE

5. DESIGN AND FABRICATION OF VALVE LAPPING MACHINE

6. PERFORMANCE OF 50CC MOPED ( TVS-CHAMP) BY USING DIFFERENT CARBURETTORS

7. TO STUDY THE PERFORMANCE OF TWO STROKE ENGINE WITH MODIFIED INTAKE SYSTEM

8. MICROPROCESSOR BASED SPEED CONTROL OF DC SHUNT MOTOR

9. LUBRICATI0N OF LPG SYSTEM FOR MOPEDS

10. SOLAR WATER DISTELLER FOR RAURAL AREAS

11. BATTERY OPERATED MAGNETIC FORCE ASSISTED MECHANICAL BRAKING SYSTEM

12. POLLUTION CONTROL THROUGH A SI ENGINE

13. COMPARATIVE STUDIES OF SOLAR STILLS

14. REC MEGHA 91

15. EXTERNALLY CHARGED BATTERY ASSISTED TRICYCLE FOR LEGLESS

16. BIOGAS PURIFICATION FOR C I ENGINE OPERATION

17. SPEED CONTROL OF RADIATOR FAN USING DIFFERENTIAL GEAR ARRANGEMENT

18. TRAFFIC LANE MARKER

19. SELECTION EXHAUST GAS RECIRCULATION IN 2-STROKE S.I ENGINE

20. AUTOMOTIVE EMISSION CONTROL

21. DESIGN AND FABRICATION OF THREE WHEELER FOR PHYSICALLY HANDICAPPED

22. BRAKE PERFORMANCE ELECTRONIC TESTER

23. PORTABLE WATER SERVICING PUMP

24. EXPERIMENTAL SET UP TO STUDY THE GYROSCOPIC COUPLE DUE TO PRECESSIONAL MOTION

25. MODIFICATION OF CARBURETTOR

26. L.P.G AS AN ALTERNATE FUEL

27. SELECTIVE EXHAUST GAS RECIRCULATION IN 2-STROKE S.I ENGINE

28. STARTER MOTOR TEST RIG

29. ELECTRO PNEUMATIC CLUTCH CONTROLLING MECHANISM

30. HINGED JACK

31. CATALYTIC CONVETER FOR TWO WHEELERS A CASE STUDY

32. DESIGN AND FABRICATION OF FOUR SEATER CAR

33. REDISINING AND TESTING OF CADI 50CC 4STROKE MOPED

34. VEHICAL AERODYNAMICS AND ITS PERFORMANCE CHARACTERSTICS

35. ENVIRONMENT FRIENDLY TWO STROKE ENGINE

36. SAFETY FEATURE IN AUTOMBILE

37. VALVE LAPPING MACHINE

38. AUTOMATED GEAR SHIFTING MECHANISM

39. AUTOMATIC HEAD LIGHT CONTROL FOR 4 WHEELERS

40. PARAMETRIC STUDY TO REDUCE NOISE FRO DIESEL ENGINE

41. MICROPROCESSOR BASED PRE PROGRAMMING CONTROLLED VEHICLE

42. MULIUTILITY PNEUMATIC KIT FOR L.M.V S

43. EURO 1 EMISSIONS

44. GAS INJECTED SPARK IGNITION ENGINE

45. DESIGN OF BRAKE LOCK FOR HYDRAULIC BRAKE SYSTEMS

46. VARIABLE COMPRESSION RATIO ENGINE FABRICATION PERFORMANCE ANALYSIS

47. FUEL INJECTION SYSTEM FOR A TWO STROKE PETROL ENGINE

48. COMPARATIVE STUDY OF C.I ENGINE PERFORMANCE USING DIFFERENT ALTERNATIVE FUELS

49. COMPARATIVE STUDY OF PERFORMANCE OF ENGINE UNDER VARIOUS BLENDS OF BIO DIESEL

50. HUMAN AWAKENING SYSTEM INTERFACE OF MICROPROCESSOR

51. PERFORMANCE AND EMISSION STUDY OF 4-STROKE S.I ENGINE WITH COPPER COATING ON COMBUSTION CHAMBER

52. DRUM SEEDER FOR PADDY CULTIVATORS( IMPROVEMENT)

53. WIND POWER TO CHARGE BATTERY IN AUTOMOBILE

54. IMPROVING FUEL ECONOMY AND ENGINE LIFE MICROPROCESSOR BASED MOBILE GEAR LEVEL INDICATOR

55. EDDY CURRENT BRAKING SYSTEM

56. A STUDY ON AMBIENT AIR QUALITY STATUS IN CHITRADURGA

57. DESIGN AND FABRIATION HYDRAULIC PRESS

58. SOLAR ELECTRIC VEHICLE

59. AUTOMATIC VEHICLE MONITORING AND CONTROL

60. SMART INFRARED PROXIMITY DETECTOR

61. ELECTROMAGNETICALLY ASSISTED ADVANCED DRUM BRAKE MECHANISM

62. MICROPROCESSOR CONTROLLED TWO WHEELER SPEED REGULATOR

63. ACCIDENT PREVENTION MECHANISM IN AUTOMOBILES

64. OPTICAL VALVE TIMING ENCODER

65. TYRE PRESSURE AUTO GOVERNING SYSTEM

66. DIGITAL RURAL BUS STAND

67. INTELLIGENT OVERTAKING MECHANISM

68. ELECTRIC BIKE

69. COTTON SEED OIL AS AN ALTERNATIVE FUEL FOR 4-STROKE C.I.ENGINE

70. COMPARATIVE STUDY OF DIRECT INJECTION C.I ENGINE USING VARIOUS ALTERNATIVE FUELS

71. HOVERCRAFT

72. AUTOMATIC GUIDED VEHICLE WITH REMOTE CONTROLLED LIFTING TROLLEY

73. SELF LOCKING MECHANISM FOR REVERSE MOTION

74. PERFORMANCE AND EMISSION STUDY OF BIODIESEL ENGINE USING ELECTRONIC FUEL INJECTION SYSTEM

75. TO STUDY THE PERFORMANCE OF C.I ENGINE USING THE BINARY MIXTURES OF ALTERNATIVE FUELS

76. PERFORMANCE AND EMISSION STUDY OF DI ENGINE USING FUEL IONIZER FOR VARIOUS BIO DIESEL MODE

• Fabrication of two wheeler water lifting pump
  
• Fabrication of sweeper robot
  
• Fabrication of exhaust pipe modification, of two wheeler, for performance improvement
  
• Fabrication of two wheeler water lifting pump
  
• Fabrication of adaptive head lamps for four wheelers
  
• Fabrication of future car
  
• Fabrication of Spark plug testing machine
  
• Fabrication of automobile painting robotic system
  
• Fabrication of stair climbing robot
  
• Fabrication of aerial vehicle
  
• Fabrication of variable height vehicle
  
• Fabrication of lawn mover
  
• Fabrication of goods carrier across stair
  
• Fabrication of electric two wheeler
  
• Fabrication of solar operated tricycle
  
• Fabrication of remote operated weapon system
  
• Fabrication of four wheel steering system
  
• Fabrication of regenerative braking vehicle
  
• Fabrication of in wheel motor
  
• Fabrication of electromagnetic braking vehicle
  
• Fabrication of model demonstrating wind mill as supplementary power source for electric vehicles
  
• Fabrication of remote controlled tilting chair for physically handicapped person
  
• Fabrication of air powered vehicle
  
• Fabrication of engine oil tester
  
• Fabrication of automated lawn mover
  
• Fabrication of conceptual solar vehicle
  
• Fabrication of remote controlled waste collecting vehicle
  
• Fabrication of Two wheeler mileage testing machine
  

For the complete list of projects, download this doc file:
[attachment=7875]

anyone needing more details of a particular project can post in our site. We will try to provide you more information.

i want further details about modification of carburetor!!!!

you may find little about modification of carburetor in http://studentbank.in/report-modification-of-carburetor

i need full report of
DRUM SEEDER FOR PADDY CULTIVATORS( IMPROVEMENT)

Direct Seeding with Drum Seeder – Future Prospects
The System of Rice Intensification (SRI) has grown to great glory with the popularisation through the use of media. The system has impressive potential in SRI over traditional practice in terms of water saving and yield. The direct seeding can reduce the expensive and labor intensive process of transplantation. The Details of the direct-seeding technology for an acre of land is :
-Seed rate required - 15 kg
-2 hours required for direct seeding.
-just 3 persons needed, one for pulling the drum seeder, one to help the puller to lift the machine at the end of the field, and one to fill/refill the seed in the drums.
-Use of weedicide is compulsory.
-upto 3/4 level, sprouted paddy seeds are filled in all the four drums. When the seeder is pulled, the seeds fall in the field at a distance of 20 cm between each of the 8 rows.

Get the details here:
http://wassansri/documents/Direct_seeding_with_drum_seeder_-_KVK_Bala_Reddy.pdf
http://sites.googlesite/bmtkvk/index/paddy-drum-seeder

M a student of deloma enggg. I want to full information of two wheelar water lifting pump,variable height vehicle,four wheel stearing system, spark plup testing machine

please send my email id full project details report.

---

pls send mu email id full project details

what is the easy project in automobile engineering

LUBRICATI0N OF LPG SYSTEM FOR MOPEDS

to get information about the topic Mechanical Engineering Project Ideas List full report , refer the page link bellow

http://studentbank.in/report-mechanical-...ideas-list

http://studentbank.in/report-mechanical-...ect-topics

http://studentbank.in/report-mechanical-...ject-ideas

http://studentbank.in/report-mechanical-...g-projects

http://studentbank.in/report-mechanical-...r-students

http://studentbank.in/report-mechanical-...ect-1-list

http://studentbank.in/report-mechanical-...eas?page=2

http://studentbank.in/report-mechanical-...ist?page=7

---