ASSISTANT PROFESSOR - COMPUTER SCIENCE AND ENGINEERING - TECHNICAL EDUCATION
#1


.pdf   ASSISTANT PROFESSOR - COMPUTER SCIENCE AND ENGINEERING - TECHNICAL EDUCATION -ENGINEERING DCOLLEGES.pdf (Size: 1.31 MB / Downloads: 1)
123/2016
1The Constituent Assembly met for the first time on 9th December in which year ?
A) 1947 (B) 1946 C) 1950 D) 1949

2'Objective Resolution' drafted and moved by Pandit Jawaharlal Nehru in the Constituent Assembly on
A) 13 December, 1946 (B) 30 January, 1946
C) 26 January, 1950 D) 3 December, 1950

3First Delimitation Commission was setup in India on
A) 1976 (B) 1955 C) 1951 D) 1960

4The Prime Minister’s Secretariat was renamed into Prime Minister’s Office at the time of
A) P. V. Narasimha Rao ((B) Jawaharlal Nehru
C) V. P. Singh D) Morarji Desai

5Who fixes the number of Judges in the Supreme Court ?
A) The President B) The Chief Justice
C) The Parliament D) Vice President

6Malayalam newspaper 'Paschimodayam' published in 1847 by A) Maman Mapilla B) Ramakrishna Pilla
C) Benjamin Bailey D) Herman Gundert

7Kallumala agitation associated with
A) Dress Code B) Educational Reform
C) Political Changes D) Temple Entry

8Name the work of K. Damodaran.
A) Ritumati B) Pattabakhi
C) Adukkalayil ninum Arangathekku D) Mathilukalkkapuram

9Who has not participated in Vaikkam Sathyagraha ?
A) K. Kelappan (B) K. P. Kesava Menon
C) A. K. Gopalan (D) Mannath Padmanabhan 
123/2016

13Bhakra Nangal Dam is across which river ?
A) Kaveri B) Mahanadi C) Satluj (D)krishna Krishna

14Current General Manager of South Eastern Railway
A) A. K. Goel B) S. Gehlot C) A. Datta (D) B. K. Jain

15Which company has launched BBM money transfer service in India ?
A) Microsoft (B) Sony ((C )Apple                  (D)  Black berry Apple D) Black Berry

16Who among the following is not the Goodwill Ambassador of India in Rio Olympics ?
A) Sachin Tendulkar B) Abinav Bindra
C) Sushil Kumar D) Salman Khan

172015 Kendra Sahitya Academy Award Winning Book
A) Agnisakshi B) Ratrimazha
C) Marannu Vecha Vasthukkal D) Aarachaar

18Which is known as Indian Education Commission ?
A) Kothari Commission B) Mudaliar Commission
C) Radhakrishnan Commission D) Saikia Committee

19Tamasa’ is the dance form of
A) Gujarat (B) Rajasthan (C )Maharastra             (D)Bihar Maharashtra D) Bihar

20Which day was celebrated as National Education Day ?
A) September 10 B) November 11 C) October 2 D) December 20

21If v = x2 i+y2 j +Z2 k, find div (curl v). A) 0
C) 2 (xi+yj-t-zk) 
  
 22. Find the Laplace transform of cosh at
s a
(A)s/82+a2     (B)a/s2-a2   (C )C)s/s2-a2  (D)a/s2+a2


24. Find the general solution of the differential equation (D3 - D2 - D + 1) y = 0.
A) c1ex + c2ex +c3e-x (B) c1e-x + c2e~x + c3ex
C) (c1 + CjX) e-x + c3ex D) c^e~* + (c2 + c3x) ex
r dz

25. If C is the unit circle, 4 -= = ?
: z^+4 
A) - B) 0 x z C) 5 01 5


26Pick up the incorrect statement from the following:
A) The straight distance between end points of a suspended tape is reduced by an amount called the sag correction.
B) While measuring a distance with a tape of length 100.005 m, the distance should be increased by 0.005 m for each tape length.
C) An increase in temperature causes a tape to increase in length and the measured distance is too large.
D) A 100 m tape of cross section 10 mm x 0.25 mm stretches about 10 mm under 5 kg pull.

27A stone of mass 1 kg is tied to a string of length 1 m and whirled in a horizontal circle at a constant angular speed 5 rad/sec. The tension in the string is
A) 30 N B) 25 N C) 15 N D) 10 N

28The ratio of the moment of inertia of a rectangle about its centroidal axis to that about its base, is
A) 1/3 (B) 1/4 C) 3/4 D) 4

29Ultimate strength to cement is provided by
A) Di-calcium silicate B) Tri-calcium silicate
C) Tri-calcium aluminate D) Tetra calcium alumino ferrite

30The portion of the brick without a triangular corner equal to half the width and half the length, is called
A) Brickbat (B) Queen closer
C) Squint brick D) King closer

31An industrial heat pump operates between the temperatures of 275 C and -13c C. The rates of heat addition and heat rejection are 750 W and 1000 W respectively. The COP for the heat pump is
A) 7.5 (B) 6.5 C) 4.0 (D) 3.0

32A hydraulic turbine develops 1000 kW power for a head of 40 m. If the head is reduced to 20 m, the power developed (in kW) is
A) 177 (B) 354 C) 500 D) 800
A -5- 
123/2016

33Two mating spur gears have 40 and 120 teeth respectively. The pinion rotates at 1200 rpm and transmits a torque of 20 Nm. The torque transmitted by gear is
A) 80 Nm B) 30 Nm
C) 40 Nm D) 60 Nm

34Misrun is a casting defect which occurs due to
A) Very high pouring temperature of the molten metal
B) Insufficient fluidity of the molten metal
C) Absorption of gases by the liquid metal
D) Improper alignment of the mould flasks

35Which of the following arc welding process does not use consumable electrode ?
A) GTAW (B) GMAW
C) SAW D) None of these

36A 500 kVA transformer has full load efficiency of 95% at UPF. It gives the same efficiency at 60% of full load and at UPF. The iron loss of the transformer is
A) 10.35 kW B) 9.87 kW (C )9.08kW (D) 10.71 kW

37Leakage flux in an induction motor is the flux that
A) Links stator and rotor windings
(B) Leaks through the machine
C) Links stator winding or the rotor winding but not both
D) Links none of the windings

38It is desired to have a constant direct current through an ideal inductor, the nature of the voltage source must be
A) Constant voltage B) Linearly increasing voltage increasing voltage
C) Exponentially increasing voltage D) An ideal impulse

39A filament bulb rated at 500 W, 100 V is to be connected in series with capacitance across 220 V, 50 Hz supply. What will be the value of the capacitor such that the voltage across the bulb and the power consumed by the bulb are according to the rating of the bulb ?
A) 78 JiF B) 81 uF
C) 90 pF D) 86 pF

40In delta to star transformation, if the three elements of the delta connection are scaled by a factor ‘m‘, m > 0, the elements of the corresponding star equivalent will be scaled by a factor of
A) m2 (B)  

41In an OPAMP out offset voltage due to input offset current is given by
A) V = I10 Ri
(B)v0=I10 R1/
C) V = 1, R
' 0 lo f D)
v = L——
0 toR +R.
V =-l, R.
O lO I

42For a PN diode, maximum reverse bias potential that can be applied before entering a zener region is called
A) Break down voltage (B) Peak inverse voltage
C) Reverse bias voltage D) None of the above

43In a fullwave rectifier the DC voltage is given by
A) V = 0.318 V B) V = 0.836
' dc m ' dc
C) V = 0.218 V D) V = 0.636 V
' dc m ' dc m

44Frequency of oscillation for an RC phase shift oscillator is given by 
  
 
45If delay line is not used in vertical section of a CRO
A) Initial Part is lost (B) Final Part is lost
C) No signal in the display D) Always shows a horizontal line

46What will be the output of the following program ? void main()
{
int i=1;
. printf("%d", i=++i=1);
A) 0 B) 1 C) 2 D) error
A -7- 
123/2016

47What will be the value of 'I' after the execution of the following program ? void main()
{
char a; float f= 10; for(a=1; a<=5;a++)
{f-=.2;} printf(‘Yif=%g",f);
}
A) 5.0 (B) 9 C) 9.0 D) error

48What will be the output of the following program ?

A) 0 (B) 1 C) 2 D) 3

49Which statement is added to the following program such that address of “r1" gets stored in “r2" ? void main()
{
int*r2;
void abc(int **); abc(&r2); printf(-%cf, *r2);
}
void abc(int **r3)
{
intr1=5;
/'add statement here*/
}
A)*r2 = &r1 (B)#r1=&r3


50The CPU can also be called as
A) Processor hub C) Node
k 
123/2016

51Numbers are represented in a computer in 2’s complement because
A) It requires less storage
B) There is a unique representation for zero
C) It produces less error when compared to other representations
D) None of the above

52Which of the following is equivalent to the expression (A+B)-(A*B)-(A +B) ?
A) F (B) T (C ) ATB (D) A-B

53Which of the following is an example of a combinational logic circuit ?
A) MUX (B) Adder C) Counter D) Decoder

54Which of the following is an example of a synchronous interrupt ?
A) Keyboard interrupt B) Pushing the reset button
C) Divide by zero D) None of the above

55Which of the following is true ?
A) Every instruction will have atleast one machine cycle
(B) The opcode of an instruction can never be one byte long
C) Every instruction has opcode fetch and memory read operation
D) None of the above

56Matrix manipulation and sorting can be easily performed by which of the type of computer ?
A) SISD B) MIMD C) MISD D) SIMD

57Operand forwarding helps to overcome
A) Branch hazards (B) Data hazards C) Both A) and (B) D) None of the above

58Which of the flags will be affected by the instruction INC AL, if AL = FFH ?
A) Zero, Carry B) Zero, Auxiliary Carry, Carry, Overflow
C) Zero only D) Carry only

59Which of the following methods is best suited for transferring 250 MB of data from hard disk to memory ?
A) Polling (B) DMA
C) Interrupt D) None of the above

60Which of the following is not true for a microcontroller ?
A) Microcontrollers have special instructions for bit manipulation
B) They are commonly used in embedded systems
C) Microcontrollers with Harvard architecture are available
D) Microcontrollers cannot run without external memory
-9- 
123/2016

72Which of the following is likely to be the most expensive cost of quality in Software Engineering ?
A) External Failure Cost (B) Appraisal Cost
C) Internal Failure Cost D) Prevention Cost 

 
74Suppose we’re debugging a quicksort implementation that is supposed to sort an array in ascending order. After the first partition step has been completed, the contents of the array are in the following order:
3 9 1 18 19 24 22 20
Which of the following statements is correct about the partition step ?
A) The pivot could have been 18, but could not have been 19
(B) The pivot could have been 19, but could not have been 18
C) The pivot could have been either 18 or 19
D) Neither 18 nor 19 could have been the pivot

75Suppose you were implementing a data structure to store information about the paintings on display at an art dealer’s showroom. Of the following data structures, which one is the right one to use ?
A) Unordered array (B) Sorted array
C) Binary search tree D) It depends

76What is the running time of the following code fragment ? for(int i = 0; i < 10; i++)
for(int j = 0; j < N; j++) for(int k = N-2; k < N+2; k++) cout<<i<<“"<<j<< endl;
A) O (log N) (B) O (N) C) O (N log N) (D) O (N2)

77Breadth first search
A) Scans each incident node along with its children
B) Scans all incident edges before moving to other node
C) Is same as back tracking
D) Scans all the nodes in random order
-12* 
123/2016

78The Knapsack problem where the objective function is to minimize the profit is
A) Greedy B) Dynamic
C) Back tracking D) Branch and Bound

79Choose the correct answer for the following statements :
INP problem can run in polynomial time on a non-deterministic turing machine.
IIAll NP complete problem are NP-Hard.
A) I is false and II is true (B) I is true and II is false
C) Both are false D) Both are true

80A Hamiltonian cycle in a Hamiltonian graph of order 24 has
A) 12 edges B) 23 edges
C) 24 edges D) None of the above

81Which of the following is not a group ?
A) The integers under addition
B) The non-zero integers under multiplication
C) The non-zero real numbers under multiplication
D) The complex numbers under addition

82The binary relation R = {(0f 0), (1,1)} on A = {0,1,2, 3} is
A) Reflexive, Not Symmetric, Transitive
(B) Not Reflexive, Symmetric, Transitive
C) Reflexive, Symmetric, Not Transitive
D) Reflexive, Not Symmetric, Not Transitive

83.Let R = {(a, a), (a? b), (b, b), (a, c), (c, c)} be a partial order relation on Σ = {a. b, c}. Let *<=’ be the corresponding lexicographic order on Σ •. Which of the following is true ?
A) bc<=ba B) abbac<=abb
C) abbac<=abbab (D) abbaaacc <= abbaab

84.What is the language of the grammar with the following production rules ?
S -> ASb | c
A a
A) {an cbn | n E N}
(B) {xcb | x E {a} *}
C) {acy | y E {b} *}
D) All of the answers above are incorrect

85.Which of the following is not decidable ?
A) Given a turing machine M, a string S and an integer k, M accepts S within k steps
(B) Equivalence of two given turing machines
C) Language accepted by a given finite state machine is not empty
D) Language generated by a context free grammar is not empty
-13- 
123/2016

86.Choose the correct statement.
A) The recursively enumerable sets are closed under complementation
B) Deterministic context free languages are dosed under intersection
C) Context sensitive languages are dosed under homomorphism
D) A is recursive if both A and its complement are accepted by turing machines

87.Which of the following statements is the most correct answer ?
A) A language is ambiguous if every sentence has two or more parse trees
B) A context-free grammar is ambiguous if the right-hand side of one of its production rules starts with the non-terminal that appears on the left-hand side
C) A language is unambiguous if every sentence has a unique left-most derivation
D) All three statements above are valid

88.What is a sentential form ?
A) One line of a derivation
B) An arbitrary string of grammar symbols
C) The content of the LL(1) parse stack
D) The string of symbols between the current point in the parse and the root of the parse tree

89.Which of the following is not used for synchronization ?
A) The Banker’s algorithm B) The Bakery algorithm
C) Busy waiting with test and set D) Monitors

90.The problem of internal fragmentation can be lessened in systems employing a fixed partition memory management scheme by using
A) Random size partitions
B) Equal size partitions
C) Unequal size partitions
D) None of the above

91.The purpose of a TLB is
A) To cache page translation information
(B) To cache frequently used data
C) To hold register values while a process is waiting to run
D) To hold page table start and end

92.Which of the following is not a web server ?
A) Internet Information Server B) NetBeans
C) Apache D) None of the above
-14- 
123/2016

93.Supply chain management refers to the coordination of all supply activities of an organisation from its suppliers and delivery of products to its customers. E-commerce transactions between a company and its stakeholders, be their consumers or businesses are often referred to as
A) C2C, C2B B) B2B, C2B
C) B2C, B2B D) B2C, C2C

94.Which of the following is not used for inter process communication ?
A) Message queue B) Semaphore
C) Pipes D) None of the above

95.A distributed file system exhibits location transparency if
A) The name of a file indicates exactly where the file can be found
(B) The name of a file does not indicate where the file can be found
C) The name of a file does not need to be changed when the location of the file changes
D) The name of a file is not adequate for finding the file

96. The input and output ports of a router perform the layer functions of the router.
A) Physical and data link layer (B) Network
C) Transport D) None of the above

97.In distance vector routing, each node periodically shares its routing table with 
whenever there is a change.
A) Every other node B) One neighbour
C) Its immediate neighbours D) None of the above

98.Which of the following is not an ICMP command ?
A) Ping B) Traceroute
C) Ifconfig D) None of the above

99.Which of the following is an application layer protocol ?
A) TCP B) Ethernet
C) Bluetooth D) HTTP

100.The cipher reorders the plain text characters to create a cipher text.
A) Substitution (B) Transposition
C) Either A) or B) D) Neither A) nor B)
Reply

Important Note..!

If you are not satisfied with above reply ,..Please

ASK HERE

So that we will collect data for you and will made reply to the request....OR try below "QUICK REPLY" box to add a reply to this page
Popular Searches: effects of computer in education sector in kenyas, engineering and science, seminar topics for civil engineering professor, systems engineering and technical, science education system in myanmar, computer science technical seminar report vtu, the use of computer in education,

[-]
Quick Reply
Message
Type your reply to this message here.

Image Verification
Please enter the text contained within the image into the text box below it. This process is used to prevent automated spam bots.
Image Verification
(case insensitive)

Possibly Related Threads...
Thread Author Replies Views Last Post
  BIO-MEDICAL ENGINEER - MEDICAL EDUCATION kerala psc previous question paper amrutha735 1 9,834 23-01-2018, 11:22 PM
Last Post: RamiGycle
  VOCATIONAL INSTRUCTOR IN COMPUTER APPLICATION-kerala psc previous question paper amrutha735 0 8,939 15-05-2017, 04:47 PM
Last Post: amrutha735
  TUTOR TECHNICIAN-MEDICAL EDUCATION-kerala psc previous question paper amrutha735 0 8,647 15-05-2017, 04:44 PM
Last Post: amrutha735
  TRADESMAN-PLUMBINGHYDRAULICS-TECHNICAL EDUCATION-kerala psc previous question paper amrutha735 0 1,607 15-05-2017, 04:39 PM
Last Post: amrutha735
  TRADESMAN WELDING-TECHNICAL EDUCATION -kerala psc previous question paper amrutha735 0 1,659 15-05-2017, 04:37 PM
Last Post: amrutha735
  TRADESMAN FITTING TECHNICAL EDUCATION- kerala psc previous question paper amrutha735 0 1,944 13-05-2017, 04:58 PM
Last Post: amrutha735
  TRADESMAN - TURNING- TECHNICAL EDUCATION - kerala psc previous question paper amrutha735 0 1,577 13-05-2017, 04:57 PM
Last Post: amrutha735
  TRADESMAN - SHEET METAL ENGINEERING - kerala psc previous question paper amrutha735 0 1,368 13-05-2017, 04:49 PM
Last Post: amrutha735
  TRADESMAN - MOULDING AND FOUNDRY - TECHNICAL -kerala psc previous question paper amrutha735 0 732 13-05-2017, 04:47 PM
Last Post: amrutha735
  TRADESMAN - MACHINIST - TECHNICAL EDUCATION -kerala psc previous question paper amrutha735 0 866 13-05-2017, 04:45 PM
Last Post: amrutha735

Forum Jump: