hi
fmdsmfdafmdkdngdmagdnnsdksdmmdngjndmdmgdsndngdsmmdkmfksmdfmsdmfnsdfndsnfmdfmsdkfndngdmsknndsnldmmglndsnfdmfdglmdsndsm
smkkfmdsmknkgmsdmgdjdgsd;lds,lg
dsmfdsmfds;lfldgm
dlsmglsd;g,sdg,,dsg
Posts: 14,118
Threads: 61
Joined: Oct 2014
Some liquids, such as water, have a great affinity for absorbing large quantities of certain
Couples (NH3) and reduce the total greatly. absorption cooling system
Steam system differs fundamentally from the compression method
refrigerant compression. Absorber, generator and pump in the absorption
the refrigeration system to replace the steam compreAmmonia steam compressor
is the alternator at high pressure from a strong solution of NH3 on
external heating source. water vapor is carried out with ammonia is removed in
Rectifier and only dehydrated ammoniacal gas enters the condenser. high pressure
NH3 vapor is condensed in the condenser. The cooled liquid NH3 analysis through
butterfly valve, the pressure and temperature of the refrigerant is decreased below the refrigeration cycles Prof USP Shet, Professor t. Sundararajan and Prof J.M. Mallikardžuna
Indian Institute of technology Madras
The temperature will be maintained in the evaporator. Includes low temperature refrigerant
evaporator and absorbs the heat from the evaporator and leaves
the evaporator in the form of vapour. A little overheated, low pressure vapour NH3
absorbed by the weak solution of solutionWeak NH3 (ammonia Aqua), entering the absorber becomes a strong judgement
After the absorption of NH3 pairs, and then is pumped through the heat generator
heat exchanger. The pump increases the pressure of strong solution into the generator,
Pressure. a strong solution of NH3 from the absorber absorbs the heat high form
The temperature of a weak solution of NH3 in the heat exchanger. Solution in the alternator
becomes weak, how comes it pairs NH3. Weak high temperature ammonia
the solution from the generator enters the heat exchanger through the butterfly valve.