07-12-2014, 04:33 AM
I like this project and i am developed and i share that idea
Posts: 14,118
Threads: 61
Joined: Oct 2014
The device includes an elongate hollow housing for telescoping on a bearing axis on which the bearing is seated. An outer collar and an inner collar are attached to the housing. The clamp means grasping the inner collar and bearing assembly to cause the bearing to pull from its seat when pressure is applied to the shaft. Disassembly of ball bearings mounted with interference between the inner stroke and the shaft. During the removal of the bearings from the shaft, the condition of the bearings and the smoothness of the shaft surface do not cause the surface to be dented. The adjustment capacity of the bearing of bearings will allow the use in bearings of a row of radial types with external diameters that oscillate between 80 and 130 mm. The diameters of the holes oscillate between 40 and 55 mm. The design of the bearing handle is designed in Solidworks software and simulated software Cosmos. This designed bearing puller will be able to disassemble the bearing that is set with 0.04mm interference for the tightest fit being used. For the most desired desired adjustment, the maximum radial pressure between the inner stroke and the shaft is 20 kN / mm².
The world is an energy store. We all know that energy can not be created or destroyed, but can be transformed from one form to another. However, we are wasting resources that can develop energy. The first wind power was produced by a machine built by Charles F. Brush in Cleveland, Ohio in 1888. It had a nominal power of 12 kW (direct current - DC). DC electricity production continued as small, independent (non-grid connected) systems until the 1930s when the first large-scale AC turbine was built in the United States. There was then a general pause of interest until the 1970s. If we can renew and reuse the energy from waste, it would help save resources. By using the concept of wind turbines, we know that wind-generated electricity can be used to charge the battery and to connect it along the power grid. Similarly, this technique is used in all moving systems like those that the wheels rotate of car, motorcycle, etc. These energies used for headlights, the purpose of starting and we can drive a car by this electric power.
It can be understood in the following video: