1.The forging temperature of gun metal alloy
A) 280° B) 950°C
C) 1200° D) 600°C

2.The Instrument using to take direct measurement from job in hot condition 

A) Parallel ruller
B) Outside caliper
C) Brass rule
D) Steel rule

3.The accuracy of depth micrometer 
A) 0.02 mm C) 0.01 mm
B) 0.001 mm D) 0.01 inch

4.The square hole on the Anvil known as
A) Hardiehole C) Beak
B) Horn D) Punch hole

5.The cutting angle of a cold chisel 
A) 90° B) 30°
C) 60° D) 45°

6.Name the tool used to enlarge a ....etc

[:=Read Full Message Here=:]

Presented By,
Mathew scaria


ENGINE RETARDERS
WHAT IS AN ENGINE RETARDER…….?
 ER is a supplementary brake system.
 It receives the vehicle braking system of some of the light duty braking.
NEED FOR ENGINE REARDER
 To maintain a consistent coefficient of friction between braking component.
 To increase braking efficiency.
 To decrease brake fade.
RETARDING PRINCIPLE
 Retarders means any components or system that effect braking action or slows motions.
 Work ....etc

[:=Read Full Message Here=:]

1. Fabrication of Solar Fridge
2. Solar Kettle (or) Solar Parabolic Collector
3. Mist Coolant system
4. Transformer heat reduction system
5. Automatic pneumatic vulcanizing Machine using heat sensor
6. Fabrication of Solar refrigeration system
7. Fabrication of Lube oil cooler
8. Fabrication of Air Dryer
9. Fabrication of Mini Boiler
10. Solar Air Conditioner
11. D & F of Chemical Processing Plant
12. Fabrication of Micro Wave Oven
13. Fabrication of Solar Air Cooler
14. Fabrication of automatic humidification system
....etc

[:=Read Full Message Here=:]

please can you give me the detail report on drilling and tapping machine ....etc

[:=Read Full Message Here=:]

1. automobile fuel indicator
2. automobile braking systems
3. spart distributor
4. like other utilities.
5. AEMS automotive engine management system using Meqa Squirt Kits
6. Redesign of brake assembly of Formula SAE car
7. Hydraulic car lift
8. Lift for small recreational vehicles (ËœMotor cycle jackâ„¢)
9. Stair climbing hand cart
10. Wheel chair accessible transfer seat base
11. Paper towel dispenser
12. Automatic labeling system
13. 1st TYPES OF PRODUCTION
14. 3 Axis Digital Accelerometer
15. 3D Solar cells
16. 3D-Kin ....etc

[:=Read Full Message Here=:]

1.A metal object obtained by allowing molten metal to solidify in a mould is known as :
(A)Casting(B) Machining
(C ) Forming(D) Molding

2.The tapper provided on all vertical surfaces of the pattern as it is lifted up is known as :
(A)Rapping allowance(B) Shrinkage allowance
(C ) Draft allowance(D) Distortion allowance

3.The added projection on the pattern and it terms a seat in the mould in which the sand core rests during the pouring of the mould is known as:
(A)Pattern
(B)Handle
(C )Core prints
(D)Core box
....etc

[:=Read Full Message Here=:]

INTRODUCTION
LARGE generators play a key role in power systems. Because they are expensive, unexpected breakdowns represent huge economic losses. High quality maintenance is therefore essential to ensure a high level of availability. In short, it is very important to ensure that large generators are in good repair and can run stably The vibration of stator bars caused by electromagnetic force exists in the operation of large generators and this is worsened by loose stator slot wedges. The severe vibration accel ....etc

[:=Read Full Message Here=:]

i want to project report on quick lifting jack with bevel gear. please sir send me at [email protected]
i want to project report on quick lifting jack with bevel gear. please sir send me at [email protected] ....etc

[:=Read Full Message Here=:]

hi boss
i wanted a report and ppt on abrasive jet machining
plz can u help me........ ....etc

[:=Read Full Message Here=:]

About Exhaust Brake Systems
Diesel engines, because of the way they operate, do not create vacuum pressure once the throttle is released in order to aid in slowing the vehicle down. For this reason, manufacturers have implemented the use of an exhaust brake, which saves wear and tear on the actual brakes, and makes towing heavy loads a bit safer.
Function
The function of an exhaust brake is to aid in slowing down vehicles with diesel engines without the use of the wheel brakes. Some of these brakes work auto ....etc

[:=Read Full Message Here=:]

Introduction
• A data type defines a collection of data objects and a set of predefined operations on those objects
• A descriptor is the collection of the attributes of a variable
• An object represents an instance of a user-defined (abstract data) type
Primitive Data Types
• Almost all programming languages provide a set of primitive data types
• Primitive data types: Those not defined in terms of other data types
• Some primitive data types are merely reflections of the hardware
• Othe ....etc

[:=Read Full Message Here=:]