AUGMENTED REALITY LEARNING
SEMINAR REPORT
Submitted by
SREERAM SASIKUMAR
Seventh Semester
B. Tech
Applied Electronics and Instrumentation
College Of Engineering, Trivandrum
2007-11 batch



Hi friends, if you like this report, say hi to the author [email protected]

ABSTRACT
AR is a field of computer research which deals with the combination of real world and computer generated data. At present, most AR research is concerned with the use of ....etc

[:=Read Full Message Here=:]

Researchers at the University of California, Berkley, have developed a way to grow nanolasers on a piece of silicon which is believes to pave the way for new generation of laser processors.

In fact the silicon is bad at generating light. Scientists had previously tried to develop chips made of silicon and so-called III-V (three-five) semiconductor materials, but this approach has problems of its own.

Lead researcher and UC Berkeley grad student Roger Chen said in a press release: Growing III-V semiconductor films on silicon is like f ....etc

[:=Read Full Message Here=:]

Introduction
 libpcap is an open source C library for putting your NIC in promiscuous mode.
Today I’ll go over a few C gotchas and how to use the libpcap API
Any C programmers?
 Planning to go to grad school?
 Agenda
 Installing libpcap
 C stuff
 Basic libpcap program
– Grab a device to sniff
– Filters/Event Loops
– Packet structure
– Getting the library
Linux:
http://sourceforgeprojects/libpcap/
VC++: Winpcaphttp://winpcap.polito.it/install/default.htm
C ....etc

[:=Read Full Message Here=:]

Please can anyone provide full report on sixth sense technology!? ....etc

[:=Read Full Message Here=:]

could i have the report or abstract on airborne internet ....etc

[:=Read Full Message Here=:]

TRANSIENT STABILITY ANALYSIS USING EQUAL AREA CRITERION USING SIMULINKMODEL
Under the guidance of Prof. SANDIP GHOSH
Submitted by:
Ankit Jha
Lalthangliana Ralte
Ashwinee Kumar
Pinak Ranjan Pati

ABSTRACT
Power-system stability is a term applied to alternating-current electric power systems, denoting a condition in which the various synchronous machines of the system remain in synchronism, or in step, with each other. Conversely, instability denotes a condition involving loss of synchronism, or falli ....etc

[:=Read Full Message Here=:]

Distributed Medium Access Control for Next Generation CDMA Wireless Networks

Generic Distributed Network Model
we focus on a generic network model where a number of wireless mobile nodes are organized in a flat fashion, communicating with each other via one-hop or multiple-hop connections without any central control. Connections to outside correspondence nodes are supported through a gateway (e.g., in the wireless backbone) or an access point (e.g.,in ad hoc networks or WPAN).
In ....etc

[:=Read Full Message Here=:]

Underwater welding refers to a number of distinct welding processes that are performed underwater.

The two main categories of underwater welding techniques are wet underwater welding and dry underwater welding, or hyperbaric welding.

In wet underwater welding, a variation of shielded metal arc welding is commonly used, employing a waterproof electrode. Other processes that are used include flux-cored arc welding and friction welding. In each of these cases, the welding power supply is connected to the welding equipment through cables and ....etc

[:=Read Full Message Here=:]

ABSTRACT
When objects move through air, forces are generated by the relative motion between the air and surfaces of the object. Aerodynamics is the study of these forces, generated by the motion of air, usually aerodynamics are categorized according to the type of flow as subsonic, hypersonic, supersonic etc.
It is essential that aerodynamics be taken in to account during the design of cars as an improved aerodynamics in car would attain higher speeds and more fuel efficiency. For attaining this ae ....etc

[:=Read Full Message Here=:]

presented by:
Mudit Rajput



Abstract
CFD Modelling of Hot-Machining Operation is a machining method conducted on conventional machine tools in which work piece is preheated before cutting operation to become softer and thereby to reduce its shear strength. Here in Final Year B.Tech Project work this work is assigned to me for understanding the Hot-Machining prospects. In our Work the job to be machined is of High Manganese- Steel. As we know the machining of these materials has always been a great challenge. ....etc

[:=Read Full Message Here=:]