Abstract
Phase Change Memory (PCM) technology appears as more scalable than DRAM technology. As PCM exhibits access time slightly longer but in the same range as DRAMs, several recent studies have proposed to use PCMs for designing main memory systems. Unfortunately PCM technology su ers from a limited write endurance; typically each memory cell can be only be written a large but still limited number of times (107 to 109 writes are reported for current technology). Till now, research proposals have essentially focuse ....etc

[:=Read Full Message Here=:]

It is often desirable for structural steel members to pass through a fire wall
or common wall rather than being curtailed on each side of the wall. In such cases, the penetrating member will often be fire protected for a certain length on each side of the wall so as to minimise the possibility of fire spread through heat conduction and excessive temperature rise of the member on the unexposed side of the wall. This latter aspect is necessary to ensure that lateral restraint will continue to be provided to the top of the wall by the member on t ....etc

[:=Read Full Message Here=:]

presented by:
S.Parasuraman, V.Ganapathy, Bijan Shirinzadeh1
School of Engineering, Monash University Malaysia,

Abstract
A key issue in the research of an autonomous mobile robot is the design and development of a navigation technique that enables the robot to navigate in a real world environment. This paper is focused on the (a) Establishment of a methodology to model the control system that optimizes the behavior rules using Fuzzy Associative Memory (FAM) for mobile robot navigation. The existing method ....etc

[:=Read Full Message Here=:]

It is often desirable for structural steel members to pass through a fire wall
or common wall rather than being curtailed on each side of the wall. In such cases, the penetrating member will often be fire protected for a certain length on each side of the wall so as to minimise the possibility of fire spread through heat conduction and excessive temperature rise of the member on the unexposed side of the wall. This latter aspect is necessary to ensure that lateral restraint will continue to be provided to the top of the wall by the member on t ....etc

[:=Read Full Message Here=:]

This topic is devoted to the analysis of the mechanical behavior of filament-wound pipes. The process of filament winding makes it possible to produce rotating parts made of composite material containing polymers reinforced with long fibers. Most of the time, this process consists in winding a fiber tow coated with a thermosetting polymeric matrix around a mandrel, and thus covering the entire mandrel after successive passages. Following a polymerization phase, the mandrel can be removed in order to get only the composite structure. In certain ....etc

[:=Read Full Message Here=:]

Bridges are lifeline structures. They act, as an important page link in surface transportation network and failure of bridges during a seismic event will seriously hamper the relief and rehabilitation work. There are many cases of damage of bridges in the past earthquakes all over the world. Due to their structural simplicity, bridges are particularly vulnerable to damage and even collapse when subjected to earthquakes. The fundamental period of vibration of a majority of bridges is in the range of 0.2 to 1.2 second. In this range, the structur ....etc

[:=Read Full Message Here=:]

Most of the examples of collective behavior mentioned above are instances of crowd behavior. The classic treatment of crowds is Gustave LeBon, The Crowd: A Study of the Popular Mind (1896), in which LeBon shows himself to be a frightened aristocrat.

He interprets the crowd episodes of the French Revolution as irrational reversions to animal emotion, and]] such reversions as characteristic of crowds in general. Freud expresses a similar view in his Group Psychology and the Analysis of the Ego (1922).

Robert Park and Herbert Blumer see crow ....etc

[:=Read Full Message Here=:]

This seminar presents the manufacturing processes of thermoplastic structures including piezoceramic patches (PZT). The objective of the study reported here was to find a trade-off between the manufacturing conditions and the thermal endurance of the PZT patches. We studied the influence of high temperatures on the PZT efficiency during manufacturing. Two processes were considered: injection molding and thermoforming. The studied object consists of a polypropylene plate containing a PZT patch integrated at different positions. On the one hand, ....etc

[:=Read Full Message Here=:]

yes.i want the ppt on thermal energy storage using pcm in solar hot water domestic system ....etc

[:=Read Full Message Here=:]

Bridges are lifeline structures. They act, as an important page link in surface transportation network and failure of bridges during a seismic event will seriously hamper the relief and rehabilitation work. There are many cases of damage of bridges in the past earthquakes all over the world. Due to their structural simplicity, bridges are particularly vulnerable to damage and even collapse when subjected to earthquakes. The fundamental period of vibration of a majority of bridges is in the range of 0.2 to 1.2 second. In this range, the structur ....etc

[:=Read Full Message Here=:]