Hello,
I want to know about the working of Non reactive suspension system used in trucks. ....etc

[:=Read Full Message Here=:]

Abstract:
Power Electronics and Advanced Control technologies have made it possible to mitigate power quality problems
and maintain the operation of sensitive loads. Among power system disturbances, voltage sags, swells and
harmonics are some of the severe problems to the sensitive loads. The series compensation method is best
suited to protect such loads against those disturbances. The use of a series compensator (SC) to improve power
quality is an isolated power system is investigated. The role of the compensator is not only to m ....etc

[:=Read Full Message Here=:]

Voltage Stability Improvement using Static Var Compensator in Power Systems

Abstract This paper investigates the effects of Static Var Compensator (SVC) on voltage stability of a power system. The functional structure for SVC built with a Thyristor Controlled Reactor (TCR) and its model are described. The model is based on representing the controller as variable impedance that changes with the firing angle of the TCR. A Power System Computer Aided Design /Electromagnetic Transients including DC (PSCAD/EMTDC) is used to ....etc

[:=Read Full Message Here=:]

I NEED A COMPLETE DOCUMENTATION ACTIVE POWER FILTERS FOR REACTIVE POWER COMPENSATION USING MATLAB SIMULINK MODEL
BY TODAY IF POSSIBLE PLZZZZZZZZZZZ........
active power filters for reactive power compensation using matlab simulink ....etc

[:=Read Full Message Here=:]

Abstract
Static VAR compensator (SVC) is incorporated inNewton Raphson method in which Power Flow Solution is a solution ofthe network under steady state conditions subjected to certainconstraints under which the system operates. The power flow solutiongives the nodal voltages and phase angles given a set of power injectionsat buses and specified voltages at a few, both the models of SVC i.e.SVC Susceptance and Firing Angle Models are discussed. It is alsoshown that the power system losses are decreased after incorporatingthe SVC in th ....etc

[:=Read Full Message Here=:]

Pulse Based Dead Time Compensator for PWM Voltage Inverters



I. Introduction
The state of the art in motor control provides an adjustable
voltage and frequency to the terminals of the motor
through a pulse width modulated (PWM) voltage source inverter
drive. As the power devices change switching states,
a dead time exists. Although the dead time is short, it
causes deviations from the desired fundamental output voltage.
While each deviation does not appreciably affect the
fundamental voltage, the ac ....etc

[:=Read Full Message Here=:]

ppt on decoupled active and reactive power control of doubly fed induction generator ....etc

[:=Read Full Message Here=:]

Prepared by:
Debashish Mishra




BACKGROUND

The significance of power factor (PF) correction is reflected in the large number of documents addressing this subject, in the engineering design effort, and in the numerous industrial plants that manufacture equipment for the control of reactive power and filtering of current harmonics . Some of the benefits derived from correct PF adjustment are:
1. reduced energy loss;
2. released generation, transmission, distribution, and substation cap ....etc

[:=Read Full Message Here=:]

ont=Verdana] ....etc

[:=Read Full Message Here=:]

we are having voltage control using static var compensator based on particle on swarm optimization so i request for your help.
we are having major project on voltage control using static var compensator based on particle swarm optimization.so i request for your hely. ....etc

[:=Read Full Message Here=:]