Governing Control system
• Speed Sensing :Mechanical (Fly ball type), Hydraulic (Pump), Electric (toothed Wheel pick up)
• MW Transducer for Power
• Processing : Hydro‐mechanical, Electrohydraulic, Digital Electro‐hydraulic
• Amplification: Hydraulic amplifiers in various stages
• Actuation: Hydraulic Servomotor
Control Requirements
• Start‐up: To control machine speed for proper synchronization
• Normal Operation: To Control MW and To participate in the control of system frequency
....etc

[:=Read Full Message Here=:]

Whether you need power generation for
independent power production or for any
industrial application, the SST-200 steam
turbine offers you the flexibility, reliability
and economy of operation you demand.
The SST-200 range: proven design
for a wide range of applications
The SST-200 is a single casing steam turbine in
packaged and skid-mounted design. It represents
a solution based on long experience of
both mechanical and generator drives in a variety
of industrial applications.
Robust solutions for both mechanical
a ....etc

[:=Read Full Message Here=:]

sir.. please give me the ppt of steam turbine blades... ....etc

[:=Read Full Message Here=:]

STUDY OF STEAM TURBINE



1.1Introduction
A steam turbine is a heat engine in which the energy of the steam is transformed into kinetic energy by expanding the steam through NOZZLE. This resultant kinetic energy is converted into force by impinging on rings of MOVING BLADES (which deflect the jets of steam) mounted on a rotating element called a ROTOR. A steam turbine may be utilized in process industries, Power plants and for transport.


1.3Theory of ....etc

[:=Read Full Message Here=:]

STEAM TURBINE
1. INTRODUCTION
A steam turbine is a mechanical device that extracts thermal energy from pressurized steam, and converts it into rotary motion. Its modern manifestation was invented by Sir Charles Parsons in 1884.
Definitions of steam turbine:
¢ turbine in which steam strikes blades and makes them turn
¢ A steam turbine is a mechanical device that extracts thermal energy from pressurized steam, and converts it into rotary motion. Its modern manifestation was invented by Sir Charles Parsons in 1884 ....etc

[:=Read Full Message Here=:]

dxgsa ....etc

[:=Read Full Message Here=:]

hello i am satyam studying in final semester ,mechanical branch.
there is a project report in curriculum.
i have undergone the training in thermal power plant for 15 days.
i have sufficient data about turbine like :
temperature, pressure, mass flow rate and typical design data for the turbine.
now i want to make project report on steam turbine.
i could not have idea which type of abstract been made.
there must be at least 80 to 100 pages in report. ....etc

[:=Read Full Message Here=:]

submitted by :-
Suhail ahmad mansoori


INTRODUCTION
A boiler is an enclosed vessel that provides a means for combustion heat to be transferred into water until it becomes heated water or steam. The hot water or steam under pressure is then usable for transferring the heat to a process. Water is a useful and cheap medium for transferring heat to a process. When water is boiled into steam its volume increases about 1,600 times, producing a force that is almost as explosive as gunpowder. This causes the boiler to ....etc

[:=Read Full Message Here=:]

please provide ppt for manufacturing process of steam turbine blades ....etc

[:=Read Full Message Here=:]

please allow me to download nozzle governing ppt ....etc

[:=Read Full Message Here=:]