ABSTRACT
A simple process to construct 3D rapid prototyping (RP) physical models for computer tomography (CT) medical images segmentation is presented by this article. The conversion of CT images to an RP model is made simpler by the use of stereolithography (STL) triangular meshes as a basis for RP construction. The STL triangular meshes are constructed directly from the data points without first converting them to curve model in the beginning. a 3D
physical model of the medical image is easily constructed once this is done. ....etc

[:=Read Full Message Here=:]

Stereolithography

Stereolithography, also known as 3-D layering or 3-D printing, allows you to create solid, plastic, three-dimensional (3-D) objects from CAD drawings in a matter of hours. Whether you are a mechanical engineer wanting to verify the fit of a part or an inventor looking to create a plastic prototype of an invention, stereolithography gives you a fast, easy way to turn CAD drawings into real objects.

3-D printing is a very good example of the age we live in. In the past, it could conceivably take months to prototype a part ....etc

[:=Read Full Message Here=:]

INTRODUCTION
Rapid prototyping automates the fabrication of a prototype part from a three- dimensional (3D) CAD drawing. This physical model conveys more complete information about the product earlier in the development cycle. The turnaround time for a typical rapid prototype part can take a few days. Conventional prototyping may take weeks or even months, depending on the method used. Rapid prototyping can be quicker more cost effective means of building prototypes as opposed to conventional methods.
F ....etc

[:=Read Full Message Here=:]

Presented by:
BYSWATI GANGWAR


A PRESENTATION ON STERIOLITHOGRAPHY 
Steriolithography (STL) is a process of rapid prototyping.
RAPID PROTOTYPING
Rapid prototyping is the automatic construction of physical objects using additive manufacturing technology.
The first techniques for rapid prototyping became available in the late 1980s and were used to produce models and prototype parts.
The use of additive manufacturing for rapid prototyping takes virtual designs from computer aided design (CAD) o ....etc

[:=Read Full Message Here=:]

STEREOLITHOGRAPHY CURE PROCESS MODELING


INTRODUCTION
In this chapter, the stereolithography (SL) technology is introduced, the objective of
this work is addressed, and the strategy to achieve the goal is demonstrated.

Introduction to Stereolithography
Stereolithography is currently the most widely used process in the rapid prototyping
and manufacturing (RP&M) field. “It translates computer aided designs (CAD) into solid
objects through a combi ....etc

[:=Read Full Message Here=:]

Abstract
Rapid Prototyping Technology is a group of manufacturing processes that enable the direct physical realization of 3D computer models. This technology converts the 3D computer data provided by a dedicated file format directly to a physical model, layer by layer with a high degree of accuracy. This technology is fast developing and is more than
competitive to traditional model building techniques considering time and degree of detail. The paper gives an overview on existing major RP techniques an ....etc

[:=Read Full Message Here=:]

INTRODUCTION
Rapid prototyping automates the fabrication of a prototype part from a three- dimensional (3D) CAD drawing. This physical model conveys more complete information about the product earlier in the development cycle. The turnaround time for a typical rapid prototype part can take a few days. Conventional prototyping may take weeks or even months, depending on the method used. Rapid prototyping can be quicker more cost effective means of building prototypes as opposed to conventional methods.
F ....etc

[:=Read Full Message Here=:]

INTRODUCTION
Rapid prototyping automates the fabrication of a prototype part from a three- dimensional (3D) CAD drawing. This physical model conveys more complete information about the product earlier in the development cycle. The turnaround time for a typical rapid prototype part can take a few days. Conventional prototyping may take weeks or even months, depending on the method used. Rapid prototyping can be quicker more cost effective means of building prototypes as opposed to conventional methods.
F ....etc

[:=Read Full Message Here=:]

• Cyberterrorism
• Adding Intelligence to Internet
• Self-Managing Computing
• Unified Modeling Language (UML)
• Socket Programming
• SAM
• VoCable
• Touch Screens
• Tempest and Echelon
• Synthetic Aperture Radar System
• Unlicensed Mobile Access
• Windows DNA
• Laptop Computer
• Intelligent Software Agents
• IP spoofing
• Internet Access via Cable TV Network
• IDS
• 10 Gigabit Ethernet
• Tripwire
• Ubiquitous Networking
• Unicode And Multilingual Computing
• XML Encryption
• ....etc

[:=Read Full Message Here=:]

Stereolithography, also known as 3-D layering or 3-D printing, allows you to create solid, plastic, three-dimensional (3-D) objects from CAD drawings in a matter of hours. Whether you are a mechanical engineer wanting to verify the fit of a part or an inventor looking to create a plastic prototype of an invention, stereolithography gives you a fast, easy way to turn CAD drawings into real objects. 3-D printing is a very good example of the age we live in. In the past, it could conceivably take months to prototype a part -- today you can do it h ....etc

[:=Read Full Message Here=:]

Please add more details about this topics
try new topics
Smart Materials
Boimetrics: An Unparelled Security Check System
HyperTech Engine
Blasting cap
Modular Cam Locks
Injection Moulding
Nanotechnology & Mechanical Engineering
Embedded Computing in Mechanical Systems
Friction Welding
Drag Racing
Humans and Energy
Metamorphic Robots
Instrument Landing System
Optical trapping and manipulation of small particles
Fuel Cells On Aerospace
Written-Pole Technology
Adaptive compensation of DTV induced brake judder
Different Types Of ....etc

[:=Read Full Message Here=:]

STEREOLITHOGRAPHY CURE PROCESS MODELING


INTRODUCTION
In this chapter, the stereolithography (SL) technology is introduced, the objective of
this work is addressed, and the strategy to achieve the goal is demonstrated.

Introduction to Stereolithography
Stereolithography is currently the most widely used process in the rapid prototyping
and manufacturing (RP&M) field. “It translates computer aided designs (CAD) into solid
objects through a combi ....etc

[:=Read Full Message Here=:]

Stereolithography, also known as 3-D layering or 3-D printing, allows you to create solid, plastic, three-dimensional (3-D) objects from CAD drawings in a matter of hours. Whether you are a mechanical engineer wanting to verify the fit of a part or an inventor looking to create a plastic prototype of an invention, stereolithography gives you a fast, easy way to turn CAD drawings into real objects. 3-D printing is a very good example of the age we live in. In the past, it could conceivably take months to prototype a part -- today you can do it h ....etc

[:=Read Full Message Here=:]

Stereolithography

Stereolithography, also known as 3-D layering or 3-D printing, allows you to create solid, plastic, three-dimensional (3-D) objects from CAD drawings in a matter of hours. Whether you are a mechanical engineer wanting to verify the fit of a part or an inventor looking to create a plastic prototype of an invention, stereolithography gives you a fast, easy way to turn CAD drawings into real objects.

3-D printing is a very good example of the age we live in. In the past, it could conceivably take months to prototype a part ....etc

[:=Read Full Message Here=:]