A NEW INTERCONNECTING METHOD FOR WIND TURBINE/GENERATOR IN A WIND FARM
Presented by:
Aswin Das
EEE
College Of Engineering, Trivandrum



CONTENTS
Objectives
Introduction
Selection of site
New method
How system works
Basic equations
Measures against halt
Operating methods
Control strategies
Basic characteristics


OBJECTIVES
A new interconnecting method for wind turbine/generator is proposed.
Through this method electrical energy of ....etc

[:=Read Full Message Here=:]

theory of brake test on 3 phase induction motor ....etc

[:=Read Full Message Here=:]

AIM:
To separate the no load losses of a 3 phase squirrel cage induction motor as iron losses and mechanical losses.
NAME PLATE DETAILS:
3Ø induction motor
Auto Transformer
FUSE RATING:
No load :10% of rated current (full load current).
PRECAUTIONS:
(1) The autotransformer should be kept in minimum voltage position.
(2) the motor should not be loaded throughout the experiment.
....etc

[:=Read Full Message Here=:]

I want to know basics about my given topic.. So please kindly known ....etc

[:=Read Full Message Here=:]

AIM:
To draw the performance characteristics of 3-phase squirrel cage induction motor by conducting load test.
THEORY:
A 3-phase induction motor consists of stator and rotor with the other associated parts. In the stator, a 3-phase winding is provided. The windings of the three phase are displaced in space by 120º.A 3-phase current is fed to the 3-phase winding. These windings produce a resultant magnetic flux and it rotates in space like a solid magnetic poles being rotated magnetically.

....etc

[:=Read Full Message Here=:]

i need internal mechanism of practical circuit of meters in seperation of no load losses of three phase induction motor ....etc

[:=Read Full Message Here=:]

i want the complete details of dis project
need a quick reply......... ....etc

[:=Read Full Message Here=:]

AIM:
To conduct the No Load test and Blocked rotor test on three phase squirrel cage induction motor and to draw the equivalent circuit.
FUSE RATING:
No load: 10% of rated current (Full load current)
Load: 125%of rated current (Full load current)
APPARATUS REQUIRED:
PRECAUTIONS:
The autotransformer should be kept at minimum voltage position.
PROCEDURE:
Note down the name plate details of motor.
1. For no-load open circuit test by adjusting autotransform ....etc

[:=Read Full Message Here=:]

ENHANCED PERFORMANCE OF A DOUBLY FED
WIND-POWER INDUCTION GENERATOR AT WIND-
RANGE BOUNDARIES
ABSTRACT
The doubly fed induction generator (DFIG) is one of the largest generators used
with MW-class wind turbines. This paper focuses on the weak performance areas
of grid-connected DFIG-based wind turbines. Basically, the DFIG performance at
low wind speeds, close to the cut in speed, and around the full rating operation (in
the vicinity of rated wind speed) is investigated. For low wind speed region, the
c ....etc

[:=Read Full Message Here=:]

braketest on squiral cage induction motor 3phase ....etc

[:=Read Full Message Here=:]