Every kW of energy saved is as good as same amount of energy generated. Such is the scarcity of energy in India. Energy can be saved by using Variable Speed Drives (VSD) for applications like Pumps and Fans. Employing conventional techniques, which uses a motor running at full speed and flow pressure being created by throttle valve, a lot of energy is wasted due to electric, thermal and mechanical losses. By replacing conventional arrangement with AC drives, tremendous amount of energy can be saved. However, traditional approach to flow control ....etc

[:=Read Full Message Here=:]

i need this pdf file can you please make it available for me. thanx ....etc

[:=Read Full Message Here=:]

....etc

[:=Read Full Message Here=:]

t=Times New Roman] ....etc

[:=Read Full Message Here=:]

CHAIN DRIVES IN LOW TORQUE DRIVES AND REDUCING PULSATIONS
INTRODUCTION TO DRIVES

Mechanical components used for power transmission.It may be belt, chain or gear depending on engine design parameters like - Distance between crankshaft and camshaft, engine maximum speed, engine-torque and engine construction cost.- Power transmission is done from one shaft to another shaft which may or may not rotate at same spe ....etc

[:=Read Full Message Here=:]

SPEED CONTROL OF SYNCHRONOUS MOTOR BY USING VARIABLE FREQUENCY DRIVES



ABSTRACT :

A novel open-loop speed control method for induction motors that provides high output torque and nearly zero steady-state speed error at any frequency is presented. The control scheme is based on the popular constant volts per hertz (V/f) method using low-cost open-loop current sensors. Only stator current measurements are needed to compensate for both stator resistance d ....etc

[:=Read Full Message Here=:]

SPEED CONTROL OF SYNCHRONOUS MOTOR BY USING VARIABLE FREQUENCY DRIVES



ABSTRACT :

A novel open-loop speed control method for induction motors that provides high output torque and nearly zero steady-state speed error at any frequency is presented. The control scheme is based on the popular constant volts per hertz (V/f) method using low-cost open-loop current sensors. Only stator current measurements are needed to compensate for both stator resista ....etc

[:=Read Full Message Here=:]

Variable Voltage And Variable Frequency drives

Presented By:
P.NATARAJU S.E.V.S.RAGHU VARMA
3rd year E.E.E. 3rd year E.E.E.

Abstract:-
Our varying industrial needs demand more precise control of the outputs of our basic electrical prime movers i.e, THE MOTORS. Basically dc motors are easy to control compared to their ac counter parts, but they have their own limitations with increase in capacity. Conversely ac motors in particular squirrel cag ....etc

[:=Read Full Message Here=:]

Control of variable speed wind turbines equipped with synchronous or doubly fed induction generators supplying islanded power systems
Abstract:
A control method for variable speed wind turbines (VSWTs) supplying islanded parts of electricalnetworks is presented. Active power/frequency and reactive power/voltage droops are applied in order todetermine the active, reactive power production, thus downscaling to the VSWTs the conventional controlconcepts of the power plants. Two types of VSWTs comprising doubly fed induction gene ....etc

[:=Read Full Message Here=:]

STEPLESS SPEED DRIVES &CONTINUOUSLY VARIABLE TRANSMISSION (CVT)
INTRODUCTION
A continuously variable transmission (CVT) is a transmission that can change steplessly through an infinite number of effective gear ratios between maximum and minimum values.
This contrasts with other mechanical transmissions that offer a fixed number of gear ratios.
The flexibility of a CVT allows the driving shaft to maintain a constant angular velocity over a range of output velocities.
ADVANTAGES
This can provide better ef ....etc

[:=Read Full Message Here=:]