ABSTRACT
Selective laser sintering (SLS) is technique by which parts are building layer by layer. The SLS is a free form fabrication method to create components by precise thermal fusing of powdered materials.
This is durable, economical and fast. The SLS is another form of rapid prototyping. This selective laser sintering (SLS) is one among the rapid prototyping which include stereo lithography (SLA). This method has also been extended to provide direct fabrication of metal and ceramic objects and tools. With this method ....etc

[:=Read Full Message Here=:]

Characterization of radio frequency plasma using Langmuir probe
and optical emission spectroscopy
M. Nisha, K. J. Saji, R. S. Ajimsha, N. V. Joshy, and M. K. Jayaraj
a
Optoelectronics Devices Laboratory, Department of Physics, Cochin University of Science
and Technology, Kochi-682 022, Kerala, India
Received 21 February 2005; accepted 4 January 2006; published online 15 February 2006
The radio frequency plasma generated during the sputtering of Indium Tin Oxide target using Argon
was analyzed by Langmuir probe and optical-emission spec ....etc

[:=Read Full Message Here=:]

Hello plz send me seminal report and ppt for above topic, my mail address [email protected].... Thank u ....etc

[:=Read Full Message Here=:]

pls send me full ppt of this topic ....etc

[:=Read Full Message Here=:]

Abstract:

It is very interesting to know about complete combustion in automobile engineering. Because
in actual practice, perfect combustion is not at all possible due to various losses in the
combustion chamber as well as design of the internal combustion engine. Moreover the
process of burning of the fuel is also not instantaneous. However an alternate solution to it is
by making the combustion of fuel as fast as possible. This can be done by using two spark
plugs which spark alternatively at a certain time interval so as incre ....etc

[:=Read Full Message Here=:]

The inkjet printing has grown into a mature noncontact patterning method in the recent times. With this method, large-area patterns can be easily created with high speeds while using only small amounts of functional materials and also high resolution can be achieved. RFID tags, organic thin-film transistors OTFTs and electrochromic devices ECDs are the major areas employing the method of inkjet printing. The future of plastic electronics is focussed on this technology.
solution processable materials are used to print conductive features onto ....etc

[:=Read Full Message Here=:]

spark plasma sintering.................jrtjuuuuuuuuuuwioeeeeeeeeeeeeeshggggggguhskjvhbbbbbbbbbbhffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffkjeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeekkkkkkkkkkknvkiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiieeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeewlllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllleojjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjjj ....etc

[:=Read Full Message Here=:]

plz some one send mo seminar report ,ppts on topic multicore architecture(multicore processor architecture) ....etc

[:=Read Full Message Here=:]

i want this ppt sir....please send me to my email id : [email protected] ....etc

[:=Read Full Message Here=:]

i want a seminar in ppt format about microwave sintering ....etc

[:=Read Full Message Here=:]