My project involves comparing some of the wireless applications in use today by studying how they work. Then focusing on WIMAX (IEEE 802.16 standard) which is a part of wireless LAN , the project will deal with the study of the various intrusion attempts and interruptions that it is faced with and their detection. It would also involve a study of the encryption and decryption schemes used. Then finally it would deal with the development of Wireless Intrusion Detection System (IDS) that would attempt to identify computer system and network intru ....etc

[:=Read Full Message Here=:]

Introduction:
Household items made of various kinds of plastic.
Plastic is the general common term for a wide range of synthetic or semisynthetic organic amorphous solid materials used in the manufacture of industrial products. Plastics are typically polymers of high molecular mass, and may contain other substances to improve performance and/or reduce costs. Monomers of Plastic are either natural or synthetic organic compounds.
The word is derived from the Greek past (plastikos) meaning fit for molding, and past ....etc

[:=Read Full Message Here=:]

I am working on Distributed generation sizing and sighting using different different meta heuristic optimization techniques.
I need particle swarm optimization technique code for the same. ....etc

[:=Read Full Message Here=:]

ABSTRACT
Genetic programming (GP) is an automated method for creating a working computer program from a high-level problem statement of a problem.
Starting with a primordial ooze of thousands of randomly created computer programs, a population of programs is progressively evolved over a series of generations. The evolutionary search uses the Darwinian principle of survival of the fittest and is patterned after naturally occurring operations, including crossover (sexual recombination), mutation, gene duplication, gene deleti ....etc

[:=Read Full Message Here=:]

An improvised MOS transistor model suitable for
Geometric Program based analog circuit sizing in
sub-micron technology

A special monomial form of the device model is required by the Geometric program. This article describes the work done in identifying the sources of inaccuracy in this basic model. The strict monomial form has been relaxed. the sizing problem is solved as a series of geometric programs instead of solving it considering as single entity. a folded-cascode op-amp sizing example is used to describe the efficiency of t ....etc

[:=Read Full Message Here=:]

Buffer Sizing for 802.11 Based Networks

Abstract:-
We consider the sizing of network buffers in 802.11 based networks. Wireless networks face a number of fundamental issues that do not arise in wired networks. We demonstrate that the use of fixed size buffers in 802.11 networks inevitably leads to either undesirable channel under-utilization or unnecessary high delays. We present two novel dynamic buffer sizing algorithms that achieve high throughput while maintaining low delay across a wide range of network con ....etc

[:=Read Full Message Here=:]

Under the Guidance of Dr. Patil Basavaraj VDept of IP & E
Submitted By Deepak Kothari

Introduction to CWR

The CWR is a rotary forming process, consists
of the forming of forging by means of wedge-shaped tools that are fixed on the mill rolls with the same rotary direction.
In CWR process, there are five stages in the work piece deformation process corresponding to five zones of the wedged tool geometry, i.e., knifing, guiding, stretching, shaping, and siz ....etc

[:=Read Full Message Here=:]

hi am gaju gydui gtoir5u urukddy hfshikdseyuvshhyrijfduok hdujjsyiist yieiovs gdjj. fub yiidb jy ....etc

[:=Read Full Message Here=:]

ABSTRACT
The search for a new, safe and stable renewable energy source led to the idea of building a power station in space which transmits electricity to Earth. The concept of Solar Power Satellites (SPS) was invented by Glaser in 1968.Research is still going on in this field and NASA is planning to implement one by 2040. SPS converts solar energy into microwaves and transmit it to a receiving antenna on Earth for conversion to electric power. The key technology needed to enable the future feasibility of SPS is Microwave P ....etc

[:=Read Full Message Here=:]

AN EFFICIENT APPROACH FOR CAPACITOR SIZING AND LOCATION ON A RADIAL DISTRIBUTION SYSTEM USING ARTIFICIAL INTELLIGENCE TECHNIQUE




INTRODUCTION

The analysis of the customer failure statistics of most
utilities indicates that the distribution system makes the
greatest individual contribution to the unavailability of
supply to a customer. Therefore, the analysis of a
distribution system is an important area of activity. It is
well known that losses in a d ....etc

[:=Read Full Message Here=:]

Buffer Sizing for 802.11 Based Networks

Abstract:-
We consider the sizing of network buffers in 802.11 based networks. Wireless networks face a number of fundamental issues that do not arise in wired networks. We demonstrate that the use of fixed size buffers in 802.11 networks inevitably leads to either undesirable channel under-utilization or unnecessary high delays. We present two novel dynamic buffer sizing algorithms that achieve high throughput while maintaining low delay across a wide range of network con ....etc

[:=Read Full Message Here=:]

I WANT TO GET THE CODE OF dg location in Matlab? ....etc

[:=Read Full Message Here=:]

Energy-Delay Estimation Technique for High-Performance Microprocessor VLSI Adders

Abstract
In this paper, we motivate the concept of comparing
VLSI adders based on their energy-delay trade-offs and
present a technique for estimating the energy-delay space
of various high-performance VLSI adder topologies.
Further, we show that our estimates accurately represent
tradeoffs in the energy-delay space for high-performance
32-bit and 64-bit processor adders in 0.13μm and 0.10μm
CMOS technologies, with an accuracy of 8% in ....etc

[:=Read Full Message Here=:]

Plz provide System Design (UML Diagrams) ....etc

[:=Read Full Message Here=:]

SITING AND SIZING OF DISTRIBUTED GENERATION
UNITS USING GA AND OPF
ABSTRACT
This paper deals with the important task of finding the optimal siting and sizing of
Distributed Generation (DG) units for a given distribution network so that the cost
of active and reactive power generation can be minimized. The optimization tech-
nique is based on Genetic Algorithm (GA) and Optimal Power Flow (OPF) calcu-
lations. Using the suggested technique of this paper, the search space of GA is lim-
ited and the optimum generation ....etc

[:=Read Full Message Here=:]

SITING AND SIZING OF DISTRIBUTED GENERATION
UNITS USING GA AND OPF
ABSTRACT
This paper deals with the important task of finding the optimal siting and sizing of
Distributed Generation (DG) units for a given distribution network so that the cost
of active and reactive power generation can be minimized. The optimization tech-
nique is based on Genetic Algorithm (GA) and Optimal Power Flow (OPF) calcu-
lations. Using the suggested technique of this paper, the search space of GA is lim-
ited and the optimum generation ....etc

[:=Read Full Message Here=:]

An improvised MOS transistor model suitable for
Geometric Program based analog circuit sizing in
sub-micron technology

A special monomial form of the device model is required by the Geometric program. This article describes the work done in identifying the sources of inaccuracy in this basic model. The strict monomial form has been relaxed. the sizing problem is solved as a series of geometric programs instead of solving it considering as single entity. a folded-cascode op-amp sizing example is used to describe the efficiency of t ....etc

[:=Read Full Message Here=:]