Abstract:
The number of industry applications in which induction motors are fed by static frequency inverters is growing fast and, although much has already been done within this field, there is still a lot to be studied/understood regarding such applications. The advance of variable speed drives systems engineering increasingly leads to the need of specific technical guidance provision by electrical machines and drives manufacturers, In this paper we have studied and developed a simulink model with PWM inverter and find out the vario ....etc

[:=Read Full Message Here=:]

Field Orientated Control of a Multi-Level PWM Inverter Fed Induction Motorr
abstract
This thesis presents the simulation of a Field Orientated Control of a Multi level PWM Inverter fed induction motor system and its implementation in terms of programming and code in a real time operating system. Field Orientated Control allows precise controllability and excellent transient behaviour when used to control an induction motor by manipulating the angle and amplitude of the torque and speed producing curren ....etc

[:=Read Full Message Here=:]

i need paper presentation of it..give this to me ....etc

[:=Read Full Message Here=:]

I need this ppt. So please allow to download this...for that i shall be greatful to you...

sanjaya kumar sahu ....etc

[:=Read Full Message Here=:]

Introduction to Pulse Width Modulation (PWM)
In this technique several pulses are produced in each half – cycle but the width of the pulses
is not the same as in case of multiple – pulse width modulation, however the width of each pulse is
varied in accordance with the amplitude of the sine wave reference voltage. The width of the pulse
at the center of the half – cycle is maximum and decreases on either side. The figure 6(a) shows the
generation of the output signal by comparing a sinusoidal reference sign ....etc

[:=Read Full Message Here=:]

ppt related to induction motor drive using seven level multi level inverter for energy saving in variable torque load applications
PPT RELATED TO INDUCTION MOTOR DRIVE USING SEVEN LEVEL MULTI LEVEL INVETER FOR ENERGY SAVING IN VARIABLE TORQUE LOAD APPLICATIONS ....etc

[:=Read Full Message Here=:]

Diode Clamped Multilevel Inverter Fed Induction Motor


INTRODUCTION

Two level voltage source inverters produce an output voltage or a current with levels either 0 or ± Vdc

In high power and high voltage application these two level inverters, however, have some limitations in operating at high frequency mainly due to switching losses and constraints of device ratings.

Unique structure of ML-VSIs allow them to reach high voltages with low-harmonics wit ....etc

[:=Read Full Message Here=:]

INTRODUCTION
1.1 Purpose:
This 500W Three-Phase Inverter is a project whose purpose is to support the University of Illinois Future Energy Challenge (FEC) team. The purpose of said team is to develop a motor drive system which is both highly efficient and cost effective. Successful implementation of such a design could potentially reduce national overall energy consumption by 10% annually if widely used throughout society (e.g. in household appliances and industry).1 These savings would greatly reduce CO2 releas ....etc

[:=Read Full Message Here=:]

Difference between the chopper fed and converter fed drives ....etc

[:=Read Full Message Here=:]

PRESENTED BY:
D .Sunil


ABSTRACT
 The main objective of the thesis is to study the operation of six pulse inverter connected to an induction motor.
• In this thesis the induction motor is fed with a three phase six step voltages of variable frequency and magnitude are applied.
o For purposes of comparison the transient behavior of the motor operated with fixed supply voltage and no feedback control. For comparison purposes 20HP, 220-V, 60HZ, Four-pole, squirrel cage induction motor is used.
o ....etc

[:=Read Full Message Here=:]